Skip to contentSkip to conversation

Using SPI in lite5200

DISCUSSION Miguel Angel Alvarez 1 participant 2 messages Dec 27, 2007

lore
Share & tools
lore
#0 lore raw

Hi.

We are trying to use the SPI subsystem in the MPC5200 to write a driver=20 that supports SC16IS752 (SPI->2 UARTs).

Although I have read the spi-summary in the Documentation of the kernel, =

I am not quite sure of having understood all the pieces that I require=20 to make the system work.

First of all, I am using the SPI associated to PSC3, so in the=20 mpc52xx_devices.c I have added a "[MPC52xx_PSC_SPI]" entry with exactly=20 the same parameters as "[MPC52xx_PSC3]", except for the name, which I=20 assign to mpc52xx-psc-spi (I suppose this is the correct driver for the=20 master of the SPI bus).

That is:

[MPC52xx_PSC_SPI] =3D {
       .name        =3D "mpc52xx-psc-spi",
       .id        =3D 2,
       .num_resources    =3D 2,
       .resource    =3D (struct resource[]) {
           {
               .start    =3D 0x2400,
               .end    =3D 0x249f,
               .flags    =3D IORESOURCE_MEM,
           },
           {
               .start    =3D MPC52xx_PSC3_IRQ,
               .end    =3D MPC52xx_PSC3_IRQ,
               .flags    =3D IORESOURCE_IRQ,
           },
       },

},

My question is: Am I using the correct IRQ? Where can I find which is=20 the correct one?

Thanks

Miguel =C1ngel=20
=20
----------------------------------------- PLEASE NOTE =
-------------------------------------------
This message, along with any attachments, may be confidential or legally = privileged.=20
It is intended only for the named person(s), who is/are the only = authorized recipients.
If this message has reached you in error, kindly destroy it without = review and notify the sender immediately.
Thank you for your help.
ZIV uses virus scanning software but excludes any liability for viruses = contained in any attachment.
=20
------------------------------------ ROGAMOS LEA ESTE TEXTO =
-------------------------------
Este mensaje y sus anexos pueden contener informaci=F3n confidencial y/o = con derecho legal.=20
Est=E1 dirigido =FAnicamente a la/s persona/s o entidad/es rese=F1adas = como =FAnico destinatario autorizado.
Si este mensaje le hubiera llegado por error, por favor elim=EDnelo sin = revisarlo ni reenviarlo y notif=EDquelo inmediatamente al remitente. = Gracias por su colaboraci=F3n. =20
ZIV utiliza software antivirus, pero no se hace responsable de los virus = contenidos en los ficheros anexos.

#1 lore raw

Hi

It seems the problem is much harder that I thought. I was trying to use=20 SPI_MOSI, SPI_MISO, SPI_SS and SPI_CLK lines in the PSC3 of my MPC5200,=20 and this made me thought that I could use the "mpc52xx-psc-spi" driver.

Reading better the user guide, I have found that the "mpc52xx-psc-spi"=20 driver is related to the "codec" spi of the PSC3 and not to the SPI=20 subsystem. Am I right?

In this case... Which code should I use as "master driver"?=20 mpc52xx-devices.c talks about a "mpc52xx-spi" driver, but I cannot find=20 it. Does it exist?

All suggestions will be appreciated.

Thanks

Miguel =C1ngel=20
=20
----------------------------------------- PLEASE NOTE =
-------------------------------------------
This message, along with any attachments, may be confidential or legally = privileged.=20
It is intended only for the named person(s), who is/are the only = authorized recipients.
If this message has reached you in error, kindly destroy it without = review and notify the sender immediately.
Thank you for your help.
=B5SysCom uses virus scanning software but excludes any liability for = viruses contained in any attachment.
=20
------------------------------------ ROGAMOS LEA ESTE TEXTO =
-------------------------------
Este mensaje y sus anexos pueden contener informaci=F3n confidencial y/o = con derecho legal.=20
Est=E1 dirigido =FAnicamente a la/s persona/s o entidad/es rese=F1adas = como =FAnico destinatario autorizado.
Si este mensaje le hubiera llegado por error, por favor elim=EDnelo sin = revisarlo ni reenviarlo y notif=EDquelo inmediatamente al remitente. = Gracias por su colaboraci=F3n. =20
=B5SysCom utiliza software antivirus, pero no se hace responsable de los = virus contenidos en los ficheros anexos.