Forcing modes in libata (was: SATA buffered read VERY
Hi,
Quoted 30 lines · Once upon a time FD Cami
Quoted 7 lines · On Sun, 6 Jan 2008 13:36:09 +0000 Alan Cox <[email protected]> wrote:
On Sun, 6 Jan 2008 08:03:31 +0300
Quoted 4 lines
Quoted 2 lines
For now you can boot with libata.dma=1 to select DMA on disks but not CD
Great, but why isn't this in the documentation?
Send patches
patch attached.
Description : Add libata.dma= to
Documentation/kernel-parameters.txtFound documentation in :
http://www.mail-archive.com/linux-ide%40vger.kernel.org/msg09849.html
http://www.redhat.com/archives/fedora-extras-commits/2007-October/msg04568.htmlSigned-off-by François Cami <[email protected]>*["libata-doc-patch.txt" (text/plain)]* <http://marc.info/?l=linux-kernel&m=119963307018562&q=p3>
diff -rU2
linux-2.6.24-rc6/Documentation/kernel-parameters.txt\
linux-2.6.24-rc6-mine/Documentation/kernel-parameters.txt--- linux-2.6.24-rc6/Documentation/kernel-parameters.txt 2008-01-06 \ 15:58:54.000000000 +0100+++
linux-2.6.24-rc6-mine/Documentation/kernel-parameters.txt2008-01-06 \
16:11:20.000000000 +0100 @@ -883,4 +883,11 @@
Review
Quoted 9 lines
(quoted diff) +7
-0C2 power state. + libata.dma= [LIBATA] DMA control + libata.dma=0 Disable all PATA DMA like old IDE + libata.dma=1 Disk DMA only + libata.dma=2 ATAPI DMA only + libata.dma=3 CF DMA only + libata.dma=0,1,3 Combinations also work. +
The code patch you are looking at has little different semantics. (1 << 2) is 4 not 3... Values for different devices are:
1 - ATA
2 - ATAPI
4 - CF
The parameter is a bitmask of 1, 2, 4. Default is 7. 2.6.24-rc3 also has this in libata-core.c which confirms the acceptance of a bitmask :
static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA; module_param_named(dma, libata_dma_mask, int, 0444); MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
Best regards,
Zoltán Böszörményi