Skip to contentSkip to conversation

boot stops after console handover?

DISCUSSION Antoine Martin 6 participants 18 messages Jan 6, 2008 – Feb 26, 2008 9 messages not in the archive KVM

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Boot stops after:

[    0.509283] time.c: Detected 2393.985 MHz processor.
[    0.600090] Console: colour VGA+ 80x25
[    0.600570] console handover: boot [earlyser0] -> real [tty0]

It sits there using 100% CPU until I kill it.

If I add "-serial file:serial.log", I get dropped to the qemu shell and the log file contains the same as above.

Sorry if this has been covered before, couldn't find it.

Cheers
Antoine

Strace of the spinning process:
clock_gettime(CLOCK_MONOTONIC, {6003, 864979716}) = 0

ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0

clock_gettime(CLOCK_MONOTONIC, {6003, 865075815}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865092971}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865156093}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865173715}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865192525}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865210519}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 162334}}) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0x7fff00000000}}, 0x7fff64781140, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2b6546c23ed0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {6003, 874979291}) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 875036807}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875054053}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 8781000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875116694}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875134858}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875152025}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 8712787}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 8683000}}, NULL) = 0 ioctl(5, 0xae80 <unfinished ...>
(ad-infinitum)

Full boot log below:

# qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append
"earlyprintk=serial,115200"
[    0.000000] Linux version 2.6.23.12 (root@gentoo) (gcc version 4.1.1
(Gentoo 4.1.1-r3)) #2 SMP Fri Jan 4 21:25:37 GMT 2008
[    0.000000] Command line: earlyprintk=serial,115200
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
[    0.000000]  BIOS-e820: 0000000017ff0000 - 0000000018000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fffbd000 - 0000000100000000 (reserved)
[    0.000000] console [earlyser0] enabled
[    0.000000] end_pfn_map = 1048576
kernel direct mapping tables up to 100000000 @ 8000-d000
[    0.000000] DMI not present or invalid.
[    0.000000] ACPI: RSDP 000FAD00, 0014 (r0 QEMU  )
[    0.000000] ACPI: RSDT 17FF0000, 002C (r1 QEMU   QEMURSDT        1
QEMU        1)
[    0.000000] ACPI: FACP 17FF002C, 0074 (r1 QEMU   QEMUFACP        1
QEMU        1)
[    0.000000] ACPI: DSDT 17FF0100, 0948 (r1   BXPC   BXDSDT        1
INTL 20061109)
[    0.000000] ACPI: FACS 17FF00C0, 0040
[    0.000000] ACPI: APIC 17FF0A48, 0040 (r1 QEMU   QEMUAPIC        1
QEMU        1)
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->    98288
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[    0.000000] Setting APIC routing to flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000
- - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- - 00000000000e8000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e8000
- - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap:
18000000:e7fbd000)
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31336 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order.  Total pages: 94849
[    0.000000] Kernel command line: earlyprintk=serial,115200
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[    0.496644] time.c: Detected 2393.776 MHz processor.
[    0.587700] Console: colour VGA+ 80x25
[    0.588182] console handover: boot [earlyser0] -> real [tty0]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.8 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEAREKAAYFAkeBK8MACgkQGK2zHPGK1rvVxQCeIIqxyiOF4cjE1LGmUNdz97nn t2cAnjnSUlqjHxBwXRTkXYRKahQy8IAg
=qF2a
-----END PGP SIGNATURE-----

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 12 lines · Antoine Martin

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

what happen if you add -no-kvm?

Quoted 126 lines

Boot stops after:

[    0.509283] time.c: Detected 2393.985 MHz processor.
[    0.600090] Console: colour VGA+ 80x25
[    0.600570] console handover: boot [earlyser0] -> real [tty0]

It sits there using 100% CPU until I kill it.

If I add "-serial file:serial.log", I get dropped to the qemu shell and the log file contains the same as above.

Sorry if this has been covered before, couldn't find it.

Cheers
Antoine

Strace of the spinning process:
clock_gettime(CLOCK_MONOTONIC, {6003, 864979716}) = 0

ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10)    = 0

clock_gettime(CLOCK_MONOTONIC, {6003, 865075815}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865092971}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865156093}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865173715}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865192525}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 865210519}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 162334}}) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0x7fff00000000}}, 0x7fff64781140, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2b6546c23ed0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {6003, 874979291}) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 875036807}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875054053}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 8781000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875116694}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875134858}) = 0 clock_gettime(CLOCK_MONOTONIC, {6003, 875152025}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 8712787}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 8683000}}, NULL) = 0 ioctl(5, 0xae80 <unfinished ...>
(ad-infinitum)

Full boot log below:

# qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append
"earlyprintk=serial,115200"
[    0.000000] Linux version 2.6.23.12 (root@gentoo) (gcc version 4.1.1
(Gentoo 4.1.1-r3)) #2 SMP Fri Jan 4 21:25:37 GMT 2008
[    0.000000] Command line: earlyprintk=serial,115200
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
[    0.000000]  BIOS-e820: 0000000017ff0000 - 0000000018000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fffbd000 - 0000000100000000 (reserved)
[    0.000000] console [earlyser0] enabled
[    0.000000] end_pfn_map = 1048576
kernel direct mapping tables up to 100000000 @ 8000-d000
[    0.000000] DMI not present or invalid.
[    0.000000] ACPI: RSDP 000FAD00, 0014 (r0 QEMU  )
[    0.000000] ACPI: RSDT 17FF0000, 002C (r1 QEMU   QEMURSDT        1
QEMU        1)
[    0.000000] ACPI: FACP 17FF002C, 0074 (r1 QEMU   QEMUFACP        1
QEMU        1)
[    0.000000] ACPI: DSDT 17FF0100, 0948 (r1   BXPC   BXDSDT        1
INTL 20061109)
[    0.000000] ACPI: FACS 17FF00C0, 0040
[    0.000000] ACPI: APIC 17FF0A48, 0040 (r1 QEMU   QEMUAPIC        1
QEMU        1)
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->    98288
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[    0.000000] Setting APIC routing to flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000
- - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- - 00000000000e8000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e8000
- - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap:
18000000:e7fbd000)
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31336 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order.  Total pages: 94849
[    0.000000] Kernel command line: earlyprintk=serial,115200
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[    0.496644] time.c: Detected 2393.776 MHz processor.
[    0.587700] Console: colour VGA+ 80x25
[    0.588182] console handover: boot [earlyser0] -> real [tty0]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.8 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEAREKAAYFAkeBK8MACgkQGK2zHPGK1rvVxQCeIIqxyiOF4cjE1LGmUNdz97nn t2cAnjnSUlqjHxBwXRTkXYRKahQy8IAg
=qF2a
-----END PGP SIGNATURE-----

Quoted 9 lines

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
kvm-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/kvm-devel

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

A message that is not in the archive (sent off-list or not yet received): 47812C21.2060408-atKUWr5tajBWk0Htik3J/[email protected]

#4 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Quoted 12 lines · Izik Eidus

Antoine Martin wrote:
Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384 -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Quoted 1 line

what happen if you add -no-kvm?

# qemu-system-x86_64 -no-kvm -hda /home/uml/BusyBox-1.5.0-amd64-root_fs
- -m 384 -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append
"earlyprintk=serial,115200"
Segmentation fault

strace:
open("/usr/local/share/qemu/vgabios-cirrus.bin", O_RDONLY) = 4
lseek(4, 0, SEEK_END) = 35840
lseek(4, 0, SEEK_SET) = 0
read(4, "U\252F\351\355\0Plex86/Bochs VGABios \0\0\0IB"..., 35840) = 35840
close(4) = 0
brk(0x626b8000) = 0x626b8000
open("/boot/vmlinuz-2.6.23.12", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=3365240, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x2b674d45f000
lseek(4, 0, SEEK_CUR) = 0
fstat(4, {st_mode=S_IFREG|0644, st_size=3365240, ...}) = 0
lseek(4, 3362816, SEEK_SET) = 3362816
read(4, "\302t@H\215=\20\6\0\0\350\241\343\377\377\351\253\370\377\377\211-\202I\0\0\273\4\0\0\0H"..., 2424) = 2424
lseek(4, 0, SEEK_SET) = 0
read(4,
"\352\5\0\300\7\214\310\216\330\216\300\216\3201\344\373\374\276-\0\254 \300t\t\264\16\273\7\0\315\20"..., 4096) = 4096
read(4, "\0\214\330f\17\267\300f\301\340\4f\5\0*\0\0f\243B-f\17\1\26@-f\303f\203\354"..., 4096) = 4096
read(4, "\213\36Z2f\307\6`,\220@\0\0f\350\255\370\377\377f\350c\376\377\377f1\300f\350\27\371"..., 4096) = 4096
read(4, "1\300\216\330\216\300\216\320\216\340\216\350\17\0\320\270 \0\0\0\17\0\330H\307\305\0\0 \0H\211"..., 3350528) = 3350528
read(4, "\302t@H\215=\20\6\0\0\350\241\343\377\377\351\253\370\377\377\211-\202I\0\0\273\4\0\0\0H"..., 4096) = 2424

close(4)                                = 0
munmap(0x2b674d45f000, 4096)            = 0
lseek(3, 0, SEEK_SET)                   = 0

read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
512) = 512
open("/etc/localtime", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=3661, ...}) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=3661, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b674d45f000
read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\7\0\0\0\7\0\0\0\0"..., 4096) = 3661
lseek(4, -2338, SEEK_CUR) = 1323
read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\10\0\0\0\10\0\0\0\0"..., 4096) = 2338

close(4)                                = 0
munmap(0x2b674d45f000, 4096)            = 0
lseek(3, 0, SEEK_END)                   = 16777216
lseek(3, 0, SEEK_END)                   = 16777216
lseek(3, 0, SEEK_END)                   = 16777216
brk(0x626db000)                         = 0x626db000

clock_gettime(CLOCK_MONOTONIC, {6697, 835147767}) = 0 clock_gettime(CLOCK_MONOTONIC, {6697, 835169254}) = 0 clock_gettime(CLOCK_MONOTONIC, {6697, 835187680}) = 0 clock_gettime(CLOCK_MONOTONIC, {6697, 835206704}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0
- --- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++

Antoine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.8 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEAREKAAYFAkeBLnQACgkQGK2zHPGK1rsaPACfaWQz1umqsXDV9Zp6ZxGVkLUR OSAAmgOFNNRAxnqYxgbvjEZV2fSCJ83h
=cEEm
-----END PGP SIGNATURE-----

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Quoted 12 lines · Antoine Martin
Quoted 8 lines · Izik Eidus

Antoine Martin wrote:
Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384 -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Quoted 7 lines
Quoted 1 line
Quoted 1 line

what happen if you add -no-kvm?

# qemu-system-x86_64 -no-kvm -hda /home/uml/BusyBox-1.5.0-amd64-root_fs
-m 384 -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append
"earlyprintk=serial,115200"

Segmentation fault

I thought maybe a newer kernel would help, so I tried 2.6.24-rc6:

# qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.24-rc6 -append
"earlyprintk=serial,115200"
exception 13 (0)
rax 0000000000000000 rbx 0000000000000000 rcx 0000000000000000 rdx
0000000000000600
rsi 0000000000000000 rdi 0000000000000000 rsp 0000000000000000 rbp
0000000000000000
r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11
0000000000000000
r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15
0000000000000000
rip 0000000000010000 rflags 00033046
cs f000 (000f0000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0)
ds 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0)
es 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0)
ss 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0)
fs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0)
gs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0)
tr 0000 (18c00000/00002088 p 1 dpl 0 db 0 s 0 type b l 0 g 0 avl 0)
ldt 0000 (00000000/0000ffff p 1 dpl 0 db 0 s 0 type 2 l 0 g 0 avl 0)
gdt 0/ffff
idt 0/ffff
cr0 60000010 cr2 0 cr3 0 cr4 0 cr8 0 efer 0
code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 --> fc
f6 86 11 02 00 00 40 75 0c fa b8 18 00 00 00 8e d8 8e c0 8e d0 8d a6 e8
01 00 00 e8 00
Aborted

Am I being unlucky, doing something wrong or do you need a more specific configuration to get kvm working?

Cheers
Antoine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.8 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEAREKAAYFAkeBVxcACgkQGK2zHPGK1rt81wCfWE7oGdo/mPfeG/Ig7JrB4QJT TQAAn0tffOWD/aY/hsxEpwZHUHMqM0GH
=C9A+
-----END PGP SIGNATURE-----

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

#7 lore raw
In reply to a message not in the archive
Quoted 12 lines · Antoine Martin

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Does regular boot (without -kernel) work?

Signature · 7 lines
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

A message that is not in the archive (sent off-list or not yet received): 4781EDE3.2000008-atKUWr5tajBWk0Htik3J/[email protected]

#9 lore raw
Quoted 12 lines · Avi Kivity
Quoted 10 lines · Antoine Martin

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Quoted 2 lines

Does regular boot (without -kernel) work?

Nope, it's just spinning at 100% cpu, tried stock 2.6.23.12 and 2.6.24-rc6, lots of clock_gettime(CLOCK_MONOTONIC,...

Do I need to enable/disable some RTC / HPET options?

Cheers
Antoine

here is the start of the strace:

# execve("/usr/local/bin/qemu-system-x86_64", ["qemu-system-x86_64", "-hda", "./BusyBox-1.5.0-amd64-root_fs", "-m", "384", "-nographic", "-append", "earlyp
rintk=serial,115200"...], [/* 26 vars */]) = 0
brk(0) = 0x62541000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b7000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b8000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=23976, ...}) = 0 mmap(NULL, 23976, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2ae8327b9000
close(3) = 0
open("/lib/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0?\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=526472, ...}) = 0 mmap(NULL, 2621672, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae8329b8000
mprotect(0x2ae832a38000, 2093056, PROT_NONE) = 0 mmap(0x2ae832c37000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7f000) = 0x2ae832c37000
close(3) = 0
open("/lib/libz.so.1", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\35\0\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=84272, ...}) = 0 mmap(NULL, 2179560, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae832c39000
mprotect(0x2ae832c4d000, 2093056, PROT_NONE) = 0 mmap(0x2ae832e4c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13000) = 0x2ae832e4c000
close(3) = 0
open("/usr/lib/libSDL-1.2.so.0", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0pe\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=255360, ...}) = 0 mmap(NULL, 2361936, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae832e4e000
mprotect(0x2ae832e8a000, 2097152, PROT_NONE) = 0 mmap(0x2ae83308a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3c000) = 0x2ae83308a000 mmap(0x2ae83308c000, 10832, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2ae83308c000
close(3) = 0
open("/lib/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260W\0\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=131897, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae83308f000
mmap(NULL, 2204528, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae833090000
mprotect(0x2ae8330a5000, 2097152, PROT_NONE) = 0 mmap(0x2ae8332a5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x2ae8332a5000 mmap(0x2ae8332a7000, 13168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2ae8332a7000
close(3) = 0
open("/lib/librt.so.1", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\"\0\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=35688, ...}) = 0 mmap(NULL, 2132968, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae8332ab000
mprotect(0x2ae8332b3000, 2093056, PROT_NONE) = 0 mmap(0x2ae8334b2000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x2ae8334b2000
close(3) = 0
open("/lib/libutil.so.1", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\16\0\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=10488, ...}) = 0 mmap(NULL, 2105624, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae8334b4000
mprotect(0x2ae8334b6000, 2093056, PROT_NONE) = 0 mmap(0x2ae8336b5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x2ae8336b5000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\334\1\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1293456, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8336b7000
mmap(NULL, 3399928, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae8336b8000
mprotect(0x2ae8337ee000, 2093056, PROT_NONE) = 0 mmap(0x2ae8339ed000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x135000) = 0x2ae8339ed000 mmap(0x2ae8339f2000, 16632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2ae8339f2000
close(3) = 0
open("/lib/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\16\0\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14528, ...}) = 0 mmap(NULL, 2109728, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x2ae8339f7000
mprotect(0x2ae8339f9000, 2097152, PROT_NONE) = 0 mmap(0x2ae833bf9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x2ae833bf9000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae833bfb000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae833bfc000
arch_prctl(ARCH_SET_FS, 0x2ae833bfbf60) = 0 mprotect(0x2ae833bf9000, 4096, PROT_READ) = 0 mprotect(0x2ae8339ed000, 16384, PROT_READ) = 0 mprotect(0x2ae8336b5000, 4096, PROT_READ) = 0 mprotect(0x2ae8334b2000, 4096, PROT_READ) = 0 mprotect(0x2ae8332a5000, 4096, PROT_READ) = 0 mprotect(0x2ae83308a000, 4096, PROT_READ) = 0 mprotect(0x2ae832e4c000, 4096, PROT_READ) = 0 mprotect(0x2ae832c37000, 4096, PROT_READ) = 0 mprotect(0x2ae8329b6000, 4096, PROT_READ) = 0

munmap(0x2ae8327b9000, 23976)           = 0
set_tid_address(0x2ae833bfbff0)         = 6164
set_robust_list(0x2ae833bfc000, 0x18)   = 0

rt_sigaction(SIGRTMIN, {0x2ae833095320, [], SA_RESTORER|SA_SIGINFO, 0x2ae83309ded0}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x2ae8330953a0, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x2ae83309ded0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0

open("/dev/kvm", O_RDWR)                = 3
ioctl(3, 0xae00, 0)                     = 12
brk(0)                                  = 0x62541000
brk(0x62562000)                         = 0x62562000

clock_gettime(CLOCK_MONOTONIC, {903, 611665420}) = 0 rt_sigaction(SIGALRM, {0x60006e20, ~[RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, NULL, 8) = 0
timer_create(CLOCK_REALTIME, {(nil), SIGALRM, SIGEV_SIGNAL, {...}}, {0x6025ec0000000000}) = 0
rt_sigaction(SIGUSR2, {0x60017fa0, ~[RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, NULL, 8) = 0
open("/etc/resolv.conf", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=83, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b9000
read(4, "# Generated by dhcpcd for interf"..., 4096) = 83

read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0x2ae8327b9000, 4096)            = 0

uname({sys="Linux", node="mamba", ...}) = 0
open("/etc/resolv.conf", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=83, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b9000
read(4, "# Generated by dhcpcd for interf"..., 4096) = 83

read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0x2ae8327b9000, 4096)            = 0

stat("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=83, ...}) = 0
open("/etc/resolv.conf", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=83, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b9000
read(4, "# Generated by dhcpcd for interf"..., 4096) = 83

read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0x2ae8327b9000, 4096)            = 0
socket(PF_FILE, SOCK_STREAM, 0)         = 4
fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK)    = 0
connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1
ENOENT (No such file or directory)
close(4)                                = 0
socket(PF_FILE, SOCK_STREAM, 0)         = 4
fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK)    = 0

connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
close(4) = 0
open("/etc/nsswitch.conf", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=508, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b9000
read(4, "# /etc/nsswitch.conf:\n# $Header:"..., 4096) = 508

read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0x2ae8327b9000, 4096)            = 0
open("/etc/ld.so.cache", O_RDONLY)      = 4

fstat(4, {st_mode=S_IFREG|0644, st_size=23976, ...}) = 0 mmap(NULL, 23976, PROT_READ, MAP_PRIVATE, 4, 0) = 0x2ae8327b9000
close(4) = 0
open("/lib/libnss_files.so.2", O_RDONLY) = 4
read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200 \0\0\0\0\0\0"..., 832) = 832
fstat(4, {st_mode=S_IFREG|0755, st_size=43344, ...}) = 0 mmap(NULL, 2139464, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4,
0) = 0x2ae833bfd000
mprotect(0x2ae833c07000, 2093056, PROT_NONE) = 0 mmap(0x2ae833e06000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x9000) = 0x2ae833e06000
close(4) = 0
mprotect(0x2ae833e06000, 4096, PROT_READ) = 0
munmap(0x2ae8327b9000, 23976) = 0
open("/etc/host.conf", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=936, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b9000
read(4, "# /etc/host.conf:\n# $Header: /va"..., 4096) = 936

read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0x2ae8327b9000, 4096)            = 0
futex(0x2ae8339f4c80, FUTEX_WAKE, 2147483647) = 0
open("/etc/hosts", O_RDONLY)            = 4
fcntl(4, F_GETFD)                       = 0
fcntl(4, F_SETFD, FD_CLOEXEC)           = 0

fstat(4, {st_mode=S_IFREG|0644, st_size=1061, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae8327b9000
read(4, "# /etc/hosts: Local Host Databas"..., 4096) = 1061

read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0x2ae8327b9000, 4096)            = 0
open("/etc/ld.so.cache", O_RDONLY)      = 4

fstat(4, {st_mode=S_IFREG|0644, st_size=23976, ...}) = 0 mmap(NULL, 23976, PROT_READ, MAP_PRIVATE, 4, 0) = 0x2ae8327b9000
close(4) = 0
open("/lib/libnss_dns.so.2", O_RDONLY) = 4
read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360\17\0\0\0\0\0\0"...,
832) = 832
fstat(4, {st_mode=S_IFREG|0755, st_size=18664, ...}) = 0 mmap(NULL, 2113800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4,
0) = 0x2ae833e08000
mprotect(0x2ae833e0c000, 2093056, PROT_NONE) = 0 mmap(0x2ae83400b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x3000) = 0x2ae83400b000
close(4) = 0
open("/lib/libresolv.so.2", O_RDONLY) = 4
read(4, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3203\0\0\0\0\0\0"...,
832) = 832
fstat(4, {st_mode=S_IFREG|0755, st_size=72464, ...}) = 0 mmap(NULL, 2177800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4,
0) = 0x2ae83400d000
mprotect(0x2ae83401d000, 2097152, PROT_NONE) = 0 mmap(0x2ae83421d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x10000) = 0x2ae83421d000 mmap(0x2ae83421f000, 6920, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2ae83421f000
close(4) = 0
mprotect(0x2ae83421d000, 4096, PROT_READ) = 0 mprotect(0x2ae83400b000, 4096, PROT_READ) = 0
munmap(0x2ae8327b9000, 23976) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.0.1")}, 28) = 0
fcntl(4, F_GETFL) = 0x2 (flags O_RDWR)
fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 0) = 1 sendto(4, "\251\231\1\0\0\1\0\0\0\0\0\0\5mamba\vlocaldomain\0\0"..., 35, MSG_NOSIGNAL, NULL, 0) = 35
poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 5000) = 1
ioctl(4, FIONREAD, [110]) = 0
recvfrom(4, "\251\231\201\203\0\1\0\0\0\1\0\0\5mamba\vlocaldomain\0\0"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("192.168.0 .1")}, [16]) = 110

close(4)                                = 0
ioctl(3, 0xae01, 0)                     = 4
ioctl(3, 0xae03, 0x4)                   = 0
ioctl(3, 0xae03, 0x3)                   = 0
ioctl(3, 0xae03, 0x4)                   = 0
ioctl(3, 0xae03, 0x4)                   = 0
ioctl(4, 0x4018ae40, 0x7fff78306ef0)    = 0
ioctl(4, 0x4018ae40, 0x7fff78306ed0)    = 0

mmap(NULL, 415248384, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0) = 0x2ae834221000
open("/dev/zero", O_RDONLY) = 5
mmap(0x2ae8342c9000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 5, 0) = 0x2ae8342c9000

close(5)                                = 0
ioctl(3, 0xae03, 0)                     = 0
ioctl(4, 0xae41, 0)                     = 5
ioctl(3, 0xae04, 0)                     = 8192
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_SHARED, 5, 0) = 0x2ae84ce24000
ioctl(3, 0xc004ae02, 0x7fff78306f80)    = -1 E2BIG (Argument list too long)
ioctl(3, 0xc004ae02, 0x62543030)        = 0
ioctl(3, 0xae03, 0x3)                   = 0

stat("./BusyBox-1.5.0-amd64-root_fs", {st_mode=S_IFREG|0644, st_size=16777216, ...}) = 0 open("./BusyBox-1.5.0-amd64-root_fs", O_RDONLY) = 6
lseek(6, 0, SEEK_END) = 16777216
lseek(6, 0, SEEK_SET) = 0
read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 2048) = 2048
close(6) = 0
open("./BusyBox-1.5.0-amd64-root_fs", O_RDWR) = 6
lseek(6, 0, SEEK_END) = 16777216
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
fcntl(0, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
ioctl(0, SNDCTL_TMR_START or TCSETS, {B38400 opost -isig -icanon -echo ...}) = 0

fcntl(0, F_SETFL, O_RDONLY|O_NONBLOCK)  = 0
mprotect(0x6153a000, 16781312, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
brk(0x6258f000)                         = 0x6258f000
ioctl(3, 0xae03, 0x3)                   = 0
brk(0x625b0000)                         = 0x625b0000
brk(0x625d1000)                         = 0x625d1000
brk(0x625f2000)                         = 0x625f2000
brk(0x62613000)                         = 0x62613000
brk(0x62634000)                         = 0x62634000
brk(0x62655000)                         = 0x62655000
brk(0x62676000)                         = 0x62676000
brk(0x62697000)                         = 0x62697000

open("/usr/local/share/qemu/bios.bin", O_RDONLY) = 7
lseek(7, 0, SEEK_END) = 131072
close(7) = 0
open("/usr/local/share/qemu/bios.bin", O_RDONLY) = 7
lseek(7, 0, SEEK_END) = 131072
lseek(7, 0, SEEK_SET) = 0
read(7, "1\300\277Hi\4\0\271\204i\4\0)\371\363\252\351\vQ\0\0001\300\216\330\377\6\0\360\364\353\375"..., 131072) = 131072
close(7) = 0
open("/usr/local/share/qemu/vgabios-cirrus.bin", O_RDONLY) = 7
lseek(7, 0, SEEK_END) = 35840
close(7) = 0
open("/usr/local/share/qemu/vgabios-cirrus.bin", O_RDONLY) = 7
lseek(7, 0, SEEK_END) = 35840
lseek(7, 0, SEEK_SET) = 0
read(7, "U\252F\351\355\0Plex86/Bochs VGABios \0\0\0IB"..., 35840) = 35840

close(7)                                = 0
ioctl(3, 0xae03, 0x3)                   = 0
ioctl(3, 0xae03, 0x3)                   = 0
brk(0x626b8000)                         = 0x626b8000
ioctl(3, 0xae03, 0x3)                   = 0
ioctl(3, 0xae03, 0x3)                   = 0
ioctl(3, 0xae03, 0x4)                   = 0
ioctl(4, 0x4018ae40, 0x7fff783063f0)    = 0

mmap(NULL, 131072, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0xfffe0000) = 0x2ae84ce26000
mmap(NULL, 8392704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x2ae84ce46000
open("/etc/localtime", O_RDONLY) = 7
fstat(7, {st_mode=S_IFREG|0644, st_size=3661, ...}) = 0 fstat(7, {st_mode=S_IFREG|0644, st_size=3661, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ae84d647000
read(7, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\7\0\0\0\7\0\0\0\0"..., 4096) = 3661
lseek(7, -2338, SEEK_CUR) = 1323
read(7, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\10\0\0\0\10\0\0\0\0"..., 4096) = 2338

close(7)                                = 0
munmap(0x2ae84d647000, 4096)            = 0
lseek(6, 0, SEEK_END)                   = 16777216
lseek(6, 0, SEEK_END)                   = 16777216
lseek(6, 0, SEEK_END)                   = 16777216
lseek(6, 0, SEEK_SET)                   = 0

read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
512) = 512
brk(0x626db000) = 0x626db000
clock_gettime(CLOCK_MONOTONIC, {903, 817836369}) = 0 rt_sigprocmask(SIG_BLOCK, [IO], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [ALRM IO], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [USR2 ALRM IO], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [USR2 ALRM IO RT_6], NULL, 8) = 0 rt_sigaction(SIGRT_6, {0x6008af30, [RT_6], SA_RESTORER|SA_RESTART, 0x2ae8336e8430}, {SIG_DFL}, 8) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 817996209}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 818017176}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 818037546}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [USR2 ALRM IO RT_6], 8) = 0
ioctl(5, 0x4004ae8b, 0x6257df70) = 0
uname({sys="Linux", node="mamba", ...}) = 0

ioctl(5, 0x4008ae8a, 0x6257a810)        = 0
ioctl(3, 0xae03, 0x6)                   = 0
ioctl(5, 0xae80, 0)                     = -1 EINTR (Interrupted system call)

rt_sigtimedwait([USR2 ALRM IO RT_6], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0}}, 0x7fff78306d20, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO RT_6], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {903, 823564382}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 823585192}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 823605645}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 823673485}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 823694588}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 823715203}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 823735475}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 148590}}) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO RT_6], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0}}, 0x7fff78306d20, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO RT_6], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {903, 833532609}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 833553404}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 833573875}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 11886000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 833641395}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 833661987}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 833682387}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 11805768}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 11777000}}, NULL) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO RT_6], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0}}, 0x7fff78306d20, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO RT_6], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {903, 853549350}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 853571856}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 853592395}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 853659773}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 853680481}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 853701088}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 853721567}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 149048}}) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO RT_6], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0}}, 0x7fff78306d20, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO RT_6], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {903, 863536524}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 863557150}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 863577685}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 9344000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 863645074}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 863665594}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 863686088}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 9263851}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 9236000}}, NULL) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO RT_6], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0}}, 0x7fff78306d20, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO RT_6], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {903, 883535813}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 883557992}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 883578519}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 883645720}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 883666267}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 883686874}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 883707390}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 149229}}) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO RT_6], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0}}, 0x7fff78306d20, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO RT_6], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {903, 893537217}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 893557903}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 893578382}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 6806000}}, NULL) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 893646282}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 893666848}) = 0 clock_gettime(CLOCK_MONOTONIC, {903, 893687391}) = 0 timer_gettime(0, {it_interval={0, 0}, it_value={0, 6725671}}) = 0 timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 6697000}}, NULL) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO RT_6], {si_signo=SIGALRM, si_code=SI_TIMER, si_pid=0, si_uid=0, si_value={int=0, ptr=0}}, 0x7fff78306d20, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1], SA_RESTORER, 0x2ae83309ded0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO RT_6], 0x6026ee00) = -1 EAGAIN (Resource temporarily unavailable)

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

A message that is not in the archive (sent off-list or not yet received): [email protected]

#11 lore raw
Quoted 13 lines · Antoine Martin
Quoted 12 lines · Avi Kivity
Quoted 10 lines · Antoine Martin

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Quoted 4 lines
Quoted 2 lines

Does regular boot (without -kernel) work?

Nope, it's just spinning at 100% cpu, tried stock 2.6.23.12 and 2.6.24-rc6, lots of clock_gettime(CLOCK_MONOTONIC,...

this is a big guess as I have no way to test it or know the internals well enough to come with an authoritative answer, but I remember having a similar problem once which was fixed by using the kernel option "nolapic"

Quoted 1 line

Do I need to enable/disable some RTC / HPET options?

there used to be a bug about it before which was closed by the reported even though I was able to reproduce it after all (haven't looked since) and it was related to the use of CONFIG_HPET_EMULATE_RTC=y in the guest kernel.

sorry for not giving you any hard evidence, but I am just going from memory here and though I would mention it just in case it could help.

Carlo

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

#12 lore raw
Quoted 12 lines · Carlo Marcelo Arenas Belon
Quoted 11 lines · Antoine Martin
Quoted 10 lines · Avi Kivity
Quoted 9 lines · Antoine Martin

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Does regular boot (without -kernel) work?

Nope, it's just spinning at 100% cpu, tried stock 2.6.23.12 and 2.6.24-rc6, lots of clock_gettime(CLOCK_MONOTONIC,...

this is a big guess as I have no way to test it or know the internals well enough to come with an authoritative answer, but I remember having a similar problem once which was fixed by using the kernel option "nolapic"

I assume this is for the host? (no effect on the guest) unfortunately that box won't boot with nolapic, the sata controllers timeout. (although I haven't tried turning apic off in the bios)

Quoted 5 lines
Quoted 1 line

Do I need to enable/disable some RTC / HPET options?

there used to be a bug about it before which was closed by the reported even though I was able to reproduce it after all (haven't looked since) and it was related to the use of CONFIG_HPET_EMULATE_RTC=y in the guest kernel.

I've disabled that, and everything else I could trim. Still no luck :(

Quoted 2 lines

sorry for not giving you any hard evidence, but I am just going from memory here and though I would mention it just in case it could help.

Thanks, much appreciated.

gdb gives me this, dunno if this helps:

#0  0x00002b231784d777 in ioctl () from /lib/libc.so.6
#1  0x00000000600ef2df in kvm_run (kvm=0x62541010, vcpu=0) at libkvm.c:901
#2  0x000000006008bdb6 in kvm_cpu_exec (env=<value optimized out>) at

/usr/src/kvm-59/qemu/qemu-kvm.c:143
#3 0x000000006008bf80 in kvm_main_loop_cpu (env=0x62546100) at /usr/src/kvm-59/qemu/qemu-kvm.c:341
#4 0x00000000600108f7 in main (argc=8, argv=0x7fff9422e758) at /usr/src/kvm-59/qemu/vl.c:7771

Which is this:

        r = ioctl(fd, KVM_RUN, 0);
where
        int fd = kvm->vcpu_fd[vcpu];

Antoine

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

#13 lore raw
In reply to a message not in the archive
Quoted 14 lines · Antoine Martin
Quoted 12 lines · Avi Kivity
Quoted 10 lines · Antoine Martin

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Quoted 8 lines
Quoted 3 lines

Does regular boot (without -kernel) work?

Nope, it's just spinning at 100% cpu, tried stock 2.6.23.12 and 2.6.24-rc6, lots of clock_gettime(CLOCK_MONOTONIC,...

Do I need to enable/disable some RTC / HPET options?

It's worth trying. If that doesn't work, maybe you can upload an image for me to debug.

Signature · 8 lines
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

A message that is not in the archive (sent off-list or not yet received): 47833572.7090902-atKUWr5tajBWk0Htik3J/[email protected]

#15 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Quoted 17 lines · Avi Kivity
Quoted 16 lines · Antoine Martin
Quoted 14 lines · Avi Kivity
Quoted 9 lines · Antoine Martin

Hi,

Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12 Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append "earlyprintk=serial,ttyS0,115200"

Does regular boot (without -kernel) work?

Quoted 7 lines
Quoted 5 lines

Nope, it's just spinning at 100% cpu, tried stock 2.6.23.12 and 2.6.24-rc6, lots of clock_gettime(CLOCK_MONOTONIC,...

Do I need to enable/disable some RTC / HPET options?

It's worth trying.

Didn't help...

Quoted 2 lines

If that doesn't work, maybe you can upload an image
for me to debug.

http://194.145.196.85/kvm/vmlinuz-2.6.24-rc7.bz2

Thanks for your time

Antoine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.8 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEAREKAAYFAkeDxswACgkQGK2zHPGK1ru8ZgCfcbt/mXL8dE4tiAXcBYm4DjnN T5wAnA1fU9kEl5AUN7m7GN+r2yiLRxcx
=cwev
-----END PGP SIGNATURE-----

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

A message that is not in the archive (sent off-list or not yet received): [email protected]

#17 lore raw
Quoted 5 lines
Quoted 2 lines

If that doesn't work, maybe you can upload an image
for me to debug.

http://194.145.196.85/kvm/vmlinuz-2.6.24-rc7.bz2

Any luck? Any other ideas for me to try?

FYI, just tried building 2.6.24-rc7-git4 and got this warning:
(...)
LD vmlinux.o
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x2cb657): Section mismatch: reference to .init.text:register_cpu_notifier (between 'kvm_init_x86' and 'kvm_sched_in')
WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
LD vmlinux

Cheers
Antoine

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

A message that is not in the archive (sent off-list or not yet received): [email protected]

#19 lore raw
Quoted 9 lines · Antoine Martin
Quoted 6 lines
Quoted 3 lines

If that doesn't work, maybe you can upload an image
for me to debug.

http://194.145.196.85/kvm/vmlinuz-2.6.24-rc7.bz2

Any luck? Any other ideas for me to try?

Haven't got around to it yet, sorry.

Quoted 5 lines

FYI, just tried building 2.6.24-rc7-git4 and got this warning:
(...)
LD vmlinux.o
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x2cb657): Section mismatch: reference to

Quoted 10 lines

.init.text:register_cpu_notifier (between 'kvm_init_x86' and 'kvm_sched_in')
WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
LD vmlinux

Probably harmless, but worth reporting to lkml.

Signature · 8 lines
Any sufficiently difficult bug is indistinguishable from a feature.


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

A message that is not in the archive (sent off-list or not yet received): 47892AA8.6090406-atKUWr5tajBWk0Htik3J/[email protected]

#21 lore raw
Quoted 16 lines · Avi Kivity
Quoted 5 lines · Antoine Martin

FYI, just tried building 2.6.24-rc7-git4 and got this warning:
(...)
LD vmlinux.o
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x2cb657): Section mismatch: reference to

Quoted 8 lines

.init.text:register_cpu_notifier (between 'kvm_init_x86' and 'kvm_sched_in')
WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
LD vmlinux

Quoted 1 line

Probably harmless, but worth reporting to lkml.

couldn't replicate it here, but I'd seen usually those kind of errors when building a kernel that hasn't been "mrproper" between re-configurations

Carlo

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

#22 lore raw
Quoted 10 lines · Carlo Marcelo Arenas Belon
Quoted 5 lines · Avi Kivity
Quoted 2 lines · Antoine Martin

FYI, just tried building 2.6.24-rc7-git4 and got this warning:
(...)

Probably harmless, but worth reporting to lkml.

couldn't replicate it here, but I'd seen usually those kind of errors when building a kernel that hasn't been "mrproper" between re-configurations

cp .config ../config-2.6.24-rc7-git4
make mrproper
cp ../config-2.6.24-rc7-git4 .config
make -j 4
(...)
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x2cb657): Section mismatch: reference to .init.text:register_cpu_notifier (between 'kvm_init_x86' and 'kvm_sched_in')
WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')

  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map

You can grab the .config here:
http://194.145.196.85/kvm/config-2.6.24-rc7-git4

Antoine

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

#23 lore raw
Quoted 6 lines · Antoine Martin
Quoted 5 lines · Carlo Marcelo Arenas Belon
Quoted 4 lines · Avi Kivity
Quoted 2 lines · Antoine Martin

FYI, just tried building 2.6.24-rc7-git4 and got this warning:
(...)

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

Probably harmless, but worth reporting to lkml.

couldn't replicate it here, but I'd seen usually those kind of errors when building a kernel that hasn't been "mrproper" between re-configurations

cp .config ../config-2.6.24-rc7-git4
make mrproper
cp ../config-2.6.24-rc7-git4 .config

make oldconfig # presumed

Quoted 1 line

make -j 4

replicated with your configuration, but can't still reproduce it with mine even when forcing as you do

CONFIG_KVM=y
CONFIG_KVM_INTEL=y

available from :

http://tapir.sajinet.com.pe/kvm/config-2.6.24-rc7-git4

Quoted 10 lines

(...)
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x2cb657): Section mismatch: reference to .init.text:register_cpu_notifier (between 'kvm_init_x86' and 'kvm_sched_in')
WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')
WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to .init.data.2:trampoline_level4_pgt (between 'ident_complete' and 'secondary_startup_64')

Quoted 6 lines
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map

You can grab the .config here:
http://194.145.196.85/kvm/config-2.6.24-rc7-git4

is this the configuration for the host kernel?

if you want to use the last code for kvm you should have CONFIG_KVM disabled and instead use the external module as instructed in (HINT: you don't have a patched kernel) :

http://kvm.qumranet.com/kvmwiki/HOWTO1

not sure which version will be part of 2.6.24 but I suspect it might not be kvm 59.

Carlo

#24 lore raw
In reply to a message not in the archive
Quoted 6 lines · Antoine Martin
Quoted 5 lines
Quoted 2 lines

If that doesn't work, maybe you can upload an image
for me to debug.

http://194.145.196.85/kvm/vmlinuz-2.6.24-rc7.bz2

Any luck? Any other ideas for me to try?

see if the problem goes away with -no-kvm-irqchip and using "nolapic" in the guest kernel

if that doesn't fix it, use the last kvm code as an external module

Carlo

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

#25 lore raw
Quoted 9 lines · Carlo Marcelo Arenas Belon
Quoted 5 lines · Antoine Martin
Quoted 4 lines
Quoted 2 lines

If that doesn't work, maybe you can upload an image
for me to debug.

http://194.145.196.85/kvm/vmlinuz-2.6.24-rc7.bz2

Any luck? Any other ideas for me to try?

see if the problem goes away with -no-kvm-irqchip and using "nolapic" in the guest kernel

No change.

Quoted 1 line

if that doesn't fix it, use the last kvm code as an external module

No change.
:(

Antoine

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

#26 lore raw
Quoted 6 lines · Antoine Martin
Quoted 5 lines · Carlo Marcelo Arenas Belon
Quoted 4 lines · Antoine Martin
Quoted 4 lines
Quoted 2 lines

If that doesn't work, maybe you can upload an image
for me to debug.

http://194.145.196.85/kvm/vmlinuz-2.6.24-rc7.bz2

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

Any luck? Any other ideas for me to try?

see if the problem goes away with -no-kvm-irqchip and using "nolapic" in the guest kernel

No change.

Quoted 1 line

if that doesn't fix it, use the last kvm code as an external module

No change.
:(

All good now.

FYI: Once I got the console output after boot using a cmdline like "earlyprintk=serial,ttyS0,115200,keep console=ttyS0,115200" I found that the kernel was spinning, failing because of some problem with the fstab or something like that (can't remember now.. need sleep) That's using 2.6.24.2
Note that I have to use the '-kernel' switch otherwise it doesn't work.

Cheers
Antoine

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/