Fix lro_mgr->features checks

Hi Dave,

The LRO_F_* checks in inet_lro.c are buggy, the following patch is needed to check lro_mgr->features correctly.

I decided to follow the NETIF_F_* convention and thus removed test_bit. Some people might like it better if we keep using test_bit and just set lro_mgr->features to 1<<LRO_F_NAPI instead of just LRO_F_NAPI. I don't know what's the best.

Without this patch, we noticed several problems with myri10ge, at least when using non-IP packets. I guess the ehea driver did not expose any big problem because test_bit(NAPI) returns true thanks to lro_mgr->features containing LRO_F_EXTRACT_VLAN_ID.

Please apply for 2.6.24.

Brice

[PATCH][LRO] Fix lro_mgr->features checks

lro_mgr->features contains a bitmask of LRO_F_* values which are defined as power of two, not as bit indexes.
They must be checked with x&LRO_F_FOO, not with test_bit(LRO_F_FOO,&x).

---

index 9a96c27..4a4d49f 100644
@@ -310,7 +310,7 @@ static void lro_flush(struct net_lro_mgr *lro_mgr,

	skb_shinfo(lro_desc->parent)->gso_size = lro_desc->mss;

	if (lro_desc->vgrp) {
-		if (test_bit(LRO_F_NAPI, &lro_mgr->features))
+		if (lro_mgr->features & LRO_F_NAPI)
			vlan_hwaccel_receive_skb(lro_desc->parent,
						 lro_desc->vgrp,
						 lro_desc->vlan_tag);
@@ -320,7 +320,7 @@ static void lro_flush(struct net_lro_mgr *lro_mgr,
					lro_desc->vlan_tag);

	} else {
-		if (test_bit(LRO_F_NAPI, &lro_mgr->features))
+		if (lro_mgr->features & LRO_F_NAPI)
			netif_receive_skb(lro_desc->parent);
		else
			netif_rx(lro_desc->parent);
@@ -352,7 +352,7 @@ static int __lro_proc_skb(struct net_lro_mgr *lro_mgr, struct sk_buff *skb,
		goto out;

	if ((skb->protocol == htons(ETH_P_8021Q))
-	    && !test_bit(LRO_F_EXTRACT_VLAN_ID, &lro_mgr->features))
+	    && !(lro_mgr->features & LRO_F_EXTRACT_VLAN_ID))
		vlan_hdr_len = VLAN_HLEN;

	if (!lro_desc->active) { /* start new lro session */
@@ -474,7 +474,7 @@ static struct sk_buff *__lro_proc_segment(struct net_lro_mgr *lro_mgr,
			goto out;

		if ((skb->protocol == htons(ETH_P_8021Q))
-		    && !test_bit(LRO_F_EXTRACT_VLAN_ID, &lro_mgr->features))
+		    && !(lro_mgr->features & LRO_F_EXTRACT_VLAN_ID))
			vlan_hdr_len = VLAN_HLEN;

		iph = (void *)(skb->data + vlan_hdr_len);
@@ -516,7 +516,7 @@ void lro_receive_skb(struct net_lro_mgr *lro_mgr,
		     void *priv)
{
	if (__lro_proc_skb(lro_mgr, skb, NULL, 0, priv)) {
-		if (test_bit(LRO_F_NAPI, &lro_mgr->features))
+		if (lro_mgr->features & LRO_F_NAPI)
			netif_receive_skb(skb);
		else
			netif_rx(skb);
@@ -531,7 +531,7 @@ void lro_vlan_hwaccel_receive_skb(struct net_lro_mgr *lro_mgr,
				  void *priv)
{
	if (__lro_proc_skb(lro_mgr, skb, vgrp, vlan_tag, priv)) {
-		if (test_bit(LRO_F_NAPI, &lro_mgr->features))
+		if (lro_mgr->features & LRO_F_NAPI)
			vlan_hwaccel_receive_skb(skb, vgrp, vlan_tag);
		else
			vlan_hwaccel_rx(skb, vgrp, vlan_tag);
@@ -550,7 +550,7 @@ void lro_receive_frags(struct net_lro_mgr *lro_mgr,
	if (!skb)
		return;

- if (test_bit(LRO_F_NAPI, &lro_mgr->features))
+ if (lro_mgr->features & LRO_F_NAPI)

		netif_receive_skb(skb);
	else
		netif_rx(skb);
@@ -570,7 +570,7 @@ void lro_vlan_hwaccel_receive_frags(struct net_lro_mgr *lro_mgr,
	if (!skb)
		return;

- if (test_bit(LRO_F_NAPI, &lro_mgr->features))
+ if (lro_mgr->features & LRO_F_NAPI)

		vlan_hwaccel_receive_skb(skb, vgrp, vlan_tag);
	else
		vlan_hwaccel_rx(skb, vgrp, vlan_tag);

From: Brice Goglin <[email protected]>
Date: Mon, 07 Jan 2008 14:33:32 +0100

Applied, thanks a lot.