memory dump on mips
Hello,
Quoted 3 lines · Thiemo Seufer
Quoted 3 lines
This sounds like you are confusing physical and virtual addresses. Typically the kernel is loaded to the direct-mapped KSEG0 segment, which starts at physical
0x00000000/ virtual0x80000000.
Thank you for pointing on that. I was not sure if this was virtual or physical since i grabbed this address from a serial-debug output. But if one thinks about that the device has around 128mb it should be clear that this can't be a physical address if ram starts at 0x00000000.
We'll check this ..
Regards,
Andi