Remove #undef DEBUG from MPC83xx board header files
PATCH v2 1/1 Remove #undef DEBUG from MPC83xx board header files
Remove the "#undef DEBUG" line from all Freescale 83xx board header files. The inclusion of this line makes it impossible to enable debug code in other source files, because "#define DEBUG" typically needs to be defined before any header files are included.
---
Added MPC8360ERDK.h.
include/configs/MPC8323ERDB.h | 2 -- include/configs/MPC832XEMDS.h | 2 -- include/configs/MPC8349EMDS.h | 2 -- include/configs/MPC8360EMDS.h | 2 -- include/configs/MPC8360ERDK.h | 2 -- include/configs/MPC837XEMDS.h | 2 -- 6 files changed, 0 insertions(+), 12 deletions(-)
include/configs/MPC8323ERDB.h +0 -2
@@ -9,8 +9,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */
include/configs/MPC832XEMDS.h +0 -2
@@ -20,8 +20,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */
include/configs/MPC8349EMDS.h +0 -2
@@ -29,8 +29,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */
include/configs/MPC8360EMDS.h +0 -2
@@ -22,8 +22,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */
include/configs/MPC8360ERDK.h +0 -2
@@ -17,8 +17,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */
include/configs/MPC837XEMDS.h +0 -2
@@ -21,8 +21,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */
Signature · 1 line
1.5.2.4
PATCH v2 1/1 Remove #undef DEBUG from MPC83xx board header files
Quoted 10 lines · On Tue, 15 Jan 2008 17:09:41 -0600 Timur Tabi <[email protected]> wrote:
Remove the "#undef DEBUG" line from all Freescale 83xx board header files. The inclusion of this line makes it impossible to enable debug code in other source files, because "#define DEBUG" typically needs to be defined before any header files are included.
Signed-off-by Timur Tabi <[email protected]>---
Added
MPC8360ERDK.h.
Quoted 7 lines
include/configs/MPC8323ERDB.h | 2 -- include/configs/MPC832XEMDS.h | 2 -- include/configs/MPC8349EMDS.h | 2 -- include/configs/MPC8360EMDS.h | 2 -- include/configs/MPC8360ERDK.h | 2 -- include/configs/MPC837XEMDS.h | 2 -- 6 files changed, 0 insertions(+), 12 deletions(-)
? Am I missing something? mpc83xx files aren't special in this area. it appears to be a problem for a lot of boards:
include/configs/ads5121.h:#undef DEBUG
include/configs/AP1000.h:#undef DEBUG
include/configs/assabet.h:#undef DEBUG
include/configs/BAB7xx.h:#undef DEBUG
include/configs/EB+MCF-EV123.h:#undef DEBUG
include/configs/ELPPC.h:#undef DEBUG
include/configs/ep8248.h:#undef DEBUG
include/configs/ep82xxm.h:#undef DEBUG
include/configs/gcplus.h:#undef DEBUG
include/configs/gw8260.h:#undef DEBUG /* General debug */
include/configs/IPHASE4539.h:#undef DEBUG /* General debug */
include/configs/M5235EVB.h:#undef DEBUG
include/configs/M5271EVB.h:#undef DEBUG
include/configs/M5329EVB.h:#undef DEBUG
include/configs/M54455EVB.h:#undef DEBUG
include/configs/mgcoge.h:#undef DEBUG
include/configs/mpc7448hpc2.h:#undef DEBUG
include/configs/MPC8323ERDB.h:#undef DEBUG
include/configs/MPC832XEMDS.h:#undef DEBUG
include/configs/MPC8349EMDS.h:#undef DEBUG
include/configs/MPC8360EMDS.h:#undef DEBUG
include/configs/MPC8360ERDK.h:#undef DEBUG
include/configs/MPC837XEMDS.h:#undef DEBUG
include/configs/MPC8540EVAL.h:#undef DEBUG
include/configs/ms7722se.h:#undef DEBUG
include/configs/ms7750se.h:#undef DEBUG
include/configs/MVBLUE.h:#undef DEBUG
include/configs/ppmc7xx.h:#undef DEBUG
include/configs/QS823.h:#undef DEBUG /* debug output code */
include/configs/QS850.h:#undef DEBUG /* debug output code */
include/configs/QS860T.h:#undef DEBUG /* debug output code */
include/configs/Rattler.h:#undef DEBUG
include/configs/sacsng.h:#undef DEBUG /* General debug */
include/configs/sbc8260.h:#undef DEBUG /* General debug */
include/configs/sbc8349.h:#undef DEBUG
Kim
PATCH v2 1/1 Remove #undef DEBUG from MPC83xx board header files
Quoted 2 lines · Kim Phillips
? Am I missing something? mpc83xx files aren't special in this area. it appears to be a problem for a lot of boards:
I'm a Freescale employee (as are you), and so I'm not going to post a patch that makes an untested changed to someone else's boards. And since 83xx is separate from 85xx and 86xx, I have to keep the patches separate, too.
Signature · 2 lines
Timur Tabi Linux kernel developer at Freescale
PATCH v2 1/1 Remove #undef DEBUG from MPC83xx board header files
Quoted 2 lines · On Wed, 16 Jan 2008 09:00:48 -0600 Timur Tabi <[email protected]> wrote:
I'm a Freescale employee (as are you), and so I'm not going to post a patch that makes an untested changed to someone else's boards. And since 83xx is separate
afaict, it's a trivial patch (minus the ads5121 which does a #define, and an immediate #undef), and I haven't seen any objections to my comment from the community.
Quoted 1 line
from 85xx and 86xx, I have to keep the patches separate, too.
WD applies the cross-arch/family patches directly.
Kim
PATCH v2 1/1 Remove #undef DEBUG from MPC83xx boardheader files
In reply to Timur TabiTimur,
Could you also remove it in the MPC8315ERDB.h in 83xx tree?
Thanks,
Dave
Quoted 128 lines
-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Tabi Timur
Sent: 2008?1?16? 7:10 AM
To: Phillips Kim; u-boot-users at lists.sourceforge.net
Cc: Tabi Timur
Subject: [U-Boot-Users] [PATCH v2] Remove #undef DEBUG from MPC83xx boardheader filesRemove the "#undef DEBUG" line from all Freescale 83xx board header files.
The inclusion of this line makes it impossible to enable debug code in other source files, because "#define DEBUG" typically needs to be defined
before any header files are included.Signed-off-by Timur Tabi <[email protected]>---
Added
MPC8360ERDK.h.include/configs/MPC8323ERDB.h | 2 -- include/configs/MPC832XEMDS.h | 2 -- include/configs/MPC8349EMDS.h | 2 -- include/configs/MPC8360EMDS.h | 2 -- include/configs/MPC8360ERDK.h | 2 -- include/configs/MPC837XEMDS.h | 2 -- 6 files changed, 0 insertions(+), 12 deletions(-)include/configs/MPC8323ERDB.h +0
-2@@ -9,8 +9,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */ include/configs/MPC832XEMDS.h +0
-2@@ -20,8 +20,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */ include/configs/MPC8349EMDS.h +0
-2@@ -29,8 +29,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */ include/configs/MPC8360EMDS.h +0
-2@@ -22,8 +22,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */ include/configs/MPC8360ERDK.h +0
-2@@ -17,8 +17,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */ include/configs/MPC837XEMDS.h +0
-2@@ -21,8 +21,6 @@#ifndef __CONFIG_H#define __CONFIG_H -#undef DEBUG -/* * High Level Configuration Options */ Signature · 12 lines
1.5.2.4 -------------------------------------------------------------- ----------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
Wolfgang Denk
AppliedPATCH v2 1/1 Remove #undef DEBUG from MPC83xx board header files
In reply to Timur TabiQuoted 6 lines · In message <[email protected]> you wrote:
Remove the "#undef DEBUG" line from all Freescale 83xx board header files. The inclusion of this line makes it impossible to enable debug code in other source files, because "#define DEBUG" typically needs to be defined before any header files are included.
Signed-off-by Timur Tabi <[email protected]>
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The net result is a system that is not only binary compatible with 4.3 BSD, but is even bug for bug compatible in almost all features." - Avadit Tevanian, Jr., "Architecture-Independent Virtual Memory Management for Parallel and Distributed Environments: The Mach Approach"