Skip to contentSkip to conversation

MMC: OMAP: Start new commands from work queue instead of irq

PATCH In review Carlos Aguiar 1 participant 1 message Jan 28, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 17/18 MMC: OMAP: Start new commands from work queue instead of irq

From: Jarkko Lavinen <[email protected]>

Use work queues for starting new commands instead of starting them directly from irq handler. The command scheduling needs to be delayed a bit for some cards which should not be done from an interrupt.

---
 drivers/mmc/host/omap.c |   48 +++++++++++++++++++++++++++++++++++++++++-----
 1 files changed, 42 insertions(+), 6 deletions(-)
drivers/mmc/host/omap.c +42 -6
index 1d8bb69..5349f9f 100644
@@ -139,6 +139,11 @@ struct mmc_omap_host {
 	unsigned		abort:1;
 	struct timer_list	cmd_abort_timer;
 
+	struct work_struct      slot_release_work;
+	struct mmc_omap_slot    *next_slot;
+	struct work_struct      send_stop_work;
+	struct mmc_data		*stop_data;
+
 	unsigned int		sg_len;
 	int			sg_idx;
 	u16 *			buffer;
@@ -237,6 +242,21 @@ no_claim:
 static void mmc_omap_start_request(struct mmc_omap_host *host,
 				   struct mmc_request *req);
 
+static void mmc_omap_slot_release_work(struct work_struct *work)
+{
+	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+						  slot_release_work);
+	struct mmc_omap_slot *next_slot = host->next_slot;
+	struct mmc_request *rq;
+
+	host->next_slot = NULL;
+	mmc_omap_select_slot(next_slot, 1);
+
+	rq = next_slot->mrq;
+	next_slot->mrq = NULL;
+	mmc_omap_start_request(host, rq);
+}
+
 static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled)
 {
 	struct mmc_omap_host *host = slot->host;
@@ -258,21 +278,19 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled)
 	/* Check for any pending requests */
 	for (i = 0; i < host->nr_slots; i++) {
 		struct mmc_omap_slot *new_slot;
-		struct mmc_request *rq;
 
 		if (host->slots[i] == NULL || host->slots[i]->mrq == NULL)
 			continue;
 
+		BUG_ON(host->next_slot != NULL);
 		new_slot = host->slots[i];
 		/* The current slot should not have a request in queue */
 		BUG_ON(new_slot == host->current_slot);
 
+		host->next_slot = new_slot;
 		host->mmc = new_slot->mmc;
 		spin_unlock_irqrestore(&host->slot_lock, flags);
-		mmc_omap_select_slot(new_slot, 1);
-		rq = new_slot->mrq;
-		new_slot->mrq = NULL;
-		mmc_omap_start_request(host, rq);
+		schedule_work(&host->slot_release_work);
 		return;
 	}
 
@@ -415,6 +433,20 @@ mmc_omap_release_dma(struct mmc_omap_host *host, struct mmc_data *data,
 		     dma_data_dir);
 }
 
+static void mmc_omap_send_stop_work(struct work_struct *work)
+{
+	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+						  send_stop_work);
+	struct mmc_omap_slot *slot = host->current_slot;
+	struct mmc_data *data = host->stop_data;
+	unsigned long tick_ns;
+
+	tick_ns = (1000000000 + slot->fclk_freq - 1)/slot->fclk_freq;
+	ndelay(8*tick_ns);
+
+	mmc_omap_start_command(host, data->stop);
+}
+
 static void
 mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 {
@@ -439,7 +471,8 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 		return;
 	}
 
-	mmc_omap_start_command(host, data->stop);
+	host->stop_data = data;
+	schedule_work(&host->send_stop_work);
 }
 
 static void
@@ -1429,6 +1462,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 		goto err_free_mem_region;
 	}
 
+	INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
+	INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
+
 	INIT_WORK(&host->cmd_abort_work, mmc_omap_abort_command);
 	setup_timer(&host->cmd_abort_timer, mmc_omap_cmd_timer,
 		    (unsigned long) host);

-- 1.5.3.GIT