Pinnacle PCTV Sat HDTV Pro USB (PCTV452e) and DVB-S2
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 139 lines · Jens Krehbiel-Gräther
Quoted 126 lines · Jens Krehbiel-Gräther
Quoted 65 lines · Dominik Kuhlen
Hi
<snip>Quoted 31 lines
dev:/usr/src/multiproto# patch -p1 < pctv452e.patch patching file linux/drivers/media/Kconfig patching file linux/drivers/media/dvb/dvb-usb/Kconfig Hunk #1 succeeded at 239 (offset 2 lines). patching file linux/drivers/media/dvb/dvb-usb/Makefile Hunk #1 succeeded at 61 with fuzz 2. patching file linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Hunk #1 FAILED at 139. 1 out of 1 hunk FAILED -- saving rejects to file linux/drivers/media/dvb/dvb-usb /dvb-usb-ids.h.rej patching file linux/drivers/media/dvb/dvb-usb/pctv452e.c patching file linux/drivers/media/dvb/frontends/Kconfig Hunk #1 succeeded at 405 (offset 47 lines). patching file linux/drivers/media/dvb/frontends/Makefile Hunk #1 succeeded at 42 (offset 3 lines). patching file linux/drivers/media/dvb/frontends/lnbp21.c Hunk #1 succeeded at 117 (offset -1 lines). patching file linux/drivers/media/dvb/frontends/lnbp22.c patching file linux/drivers/media/dvb/frontends/lnbp22.h patching file linux/drivers/media/dvb/frontends/stb0899_algo.c Hunk #1 succeeded at 495 (offset -27 lines). patching file linux/drivers/media/dvb/frontends/stb0899_drv.c patching file linux/drivers/media/dvb/frontends/stb0899_drv.h patching file linux/drivers/media/dvb/frontends/stb6100.c patching file linux/include/linux/dvb/frontend.h patching file linux/include/linux/dvb/video.h Hunk #1 succeeded at 32 with fuzz 1 (offset 1 line). dev:/usr/src/multiproto# </snip>Quoted 6 lines
So I inserted the line into
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.hby hand
#defineUSB_PID_PCTV_452E0x021fok. this might happen if the file has been changed in repository since i have diff'ed.
Quoted 6 lines
I type make and all compiles with only a few warnings but now without any error.
When I install the modules and load them I get the following output from dmesg:
Quoted 13 lines
</snip>
usb 3-2: new high speed USB device usingehci_hcdand address 4 usb 3-2: configuration #1 chosen from 1 choice
dvb-usb: found a 'PCTV HDTV USB' in warm state.pctv452e_power_ctrl: 1
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (PCTV HDTV USB)pctv452e_frontend_attachEnterstb0899_attach: Exiting .. !Quoted 6 lines
Hmm. i wonder why this happens: the stb0899 did not attach properly:
could you please load the stb0899 without verbose= parameter.
it will print more info what's going on.Hi!
Well perhaps it is a hardware error in my device??
Loading the module without "verbose" parameter prints the following in the syslog:Jan 30 19:37:21 dev kernel: usb 3-6: new high speed USB device using ehci_hcd and address 2 Jan 30 19:37:21 dev kernel: usb 3-6: device descriptor read/64, error -71 Jan 30 19:37:22 dev kernel: usb 3-6: device descriptor read/64, error -71 Jan 30 19:37:22 dev kernel: usb 3-6: new high speed USB device using ehci_hcd and address 3 Jan 30 19:37:22 dev kernel: usb 3-6: configuration #1 chosen from 1 choice Jan 30 19:37:22 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state. Jan 30 19:37:22 dev kernel: pctv452e_power_ctrl: 1 Jan 30 19:37:22 dev kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jan 30 19:37:22 dev kernel: DVB: registering new adapter (PCTV HDTV USB) Jan 30 19:37:22 dev kernel: pctv452e_frontend_attach Enter Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1b6]: 02 Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1c2]: 00 Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf1c3]: 00 Jan 30 19:37:22 dev kernel: stb0899_write_regs [0xf141]: 02 Jan 30 19:37:22 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=05 Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: ID reg=[0x05] Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Device ID=[0], Release=[5] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Demodulator Core ID=[<B7><FF><FE>^E], Version=[-1207960059] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0xb7fffe05] Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: couldn't find a STB 0899 Jan 30 19:37:22 dev kernel: stb0899_attach: Exiting .. ! Jan 30 19:37:22 dev kernel: dvb-usb: no frontend was attached by 'PCTV HDTV USB' Jan 30 19:37:22 dev kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input4 Jan 30 19:37:22 dev kernel: dvb-usb: schedule remote query interval to 100 msecs. Jan 30 19:37:22 dev kernel: pctv452e_power_ctrl: 0 Jan 30 19:37:22 dev kernel: dvb-usb: PCTV HDTV USB successfully initialized and connected. Jan 30 19:37:22 dev kernel: usbcore: registered new interface driverpctv452e
Quoted 10 lines
Because of this line I think there is an error in the hardware:
Jan 30 19:37:22 dev kernel: stb0899_get_dev_id: Demodulator CoreID=[<B7><FF><FE>^E], Version=[-1207960059]
Also the light is always showing green (even if it is not connected with a pc).
I will test the device under windows this evening to see wheter it is working or not.
Quoted 5 lines
OK, I really think its a hardware problem. In Windows I get a bluescreen when I start the TV-Application (on 3 different PCs, so I think it must be something wrong with the hardware).
I will try again when I get a new device from pinnacle support.
Hi!
Finally I got a new device from pinnacle support today. I plugged it into the computer and the modules loaded fine (without an error). But now I have another problem. I scaned for channels and this works fine. After that I tried to tune. First try was "ProSieben HD" (Astra 19,2° E). I got a lock on this channel.
After this tuning (it works one time) I could never scan any more or tune to a channel.
This is the syslog from scanning for channels:
Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: 14 7c Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=5244, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: eb 84 Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=-5244, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: 16 31 Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=5681, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf43e]: e9 cf Feb 11 22:12:13 dev kernel: stb0899_search_carrier: Derot Freq=-5681, mclk=1510 Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf41b], data=ee Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: ee Feb 11 22:12:13 dev kernel: _stb0899_read_reg: Reg=[0xf43a], data=08 Feb 11 22:12:13 dev kernel: stb0899_check_carrier: --------------------> STB0899_DSTATUS=[0x08] Feb 11 22:12:13 dev kernel: stb0899_check_carrier: -------------> NOCARRIER ! Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf417]: 33 Feb 11 22:12:13 dev kernel: stb0899_write_regs [0xf41b]: f7 Feb 11 22:12:13 dev kernel: stb0899_read_status: Delivery system DVB-S/DSS Feb 11 22:12:13 dev kernel: stb0899_read_status: Delivery system DVB-S/DSS Feb 11 22:12:14 dev kernel: lnbp22_set_voltage: 2 (18V=1 13V=0) Feb 11 22:12:14 dev kernel: lnbp22_set_voltage: 0x60) Feb 11 22:12:14 dev kernel: _stb0899_read_reg: Reg=[0xf12a], data=5c Feb 11 22:12:14 dev kernel: stb0899_i2c_gate_ctrl: Disabling I2C Repeater ... Feb 11 22:12:14 dev kernel: stb0899_write_regs [0xf12a]: 5c Feb 11 22:12:14 dev kernel: stb0899_sleep: Going to Sleep .. (Really tired .. :-)) Feb 11 22:12:14 dev kernel: stb0899_write_regs [0xf141]: 82 Feb 11 22:12:14 dev kernel: pctv452e_power_ctrl: 0
(these are the last lines, if you need others, please mail me).
Is there something that I can do?? It works one time scanning and one time tuning, after that never more (even after some reboots and plugging power off the device).
I don't know if I am doing anything wrong, because one time it works...
thx,
Jens
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi!
Here is the complete log.
syslog from loading the modules:
Feb 12 13:57:34 dev kernel: usb 3-6: new high speed USB device using ehci_hcd and address 3 Feb 12 13:57:34 dev kernel: usb 3-6: configuration #1 chosen from 1 choice Feb 12 13:57:34 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state. Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 1 Feb 12 13:57:34 dev kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Feb 12 13:57:34 dev kernel: DVB: registering new adapter (PCTV HDTV USB) Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Enter Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1b6]: 02 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c2]: 00 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c3]: 00 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf141]: 02 Feb 12 13:57:34 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=81 Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: ID reg=[0x81] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Device ID=[8], Release=[1] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] Feb 12 13:57:34 dev kernel: stb0899_attach: Attaching STB0899 Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 2 (18V=1 13V=0) Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 0x60) Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Leave Ok Feb 12 13:57:34 dev kernel: DVB: registering frontend 0 (STB0899 Multistandard)... Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Enter Feb 12 13:57:34 dev kernel: stb6100_attach: Attaching STB6100 Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Leave Feb 12 13:57:34 dev kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input5 Feb 12 13:57:34 dev kernel: dvb-usb: schedule remote query interval to 100 msecs. Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 0 Feb 12 13:57:34 dev kernel: dvb-usb: PCTV HDTV USB successfully initialized and connected. Feb 12 13:57:34 dev kernel: usbcore: registered new interface driver
pctv452e
And a complete log from a complete scan on Astra 19,2°E can you download here (about 1,6MB uncompressed, for Download 37kB gzip-File):
http://www.rz.uni-karlsruhe.de/~ry52/syslog.gz
If you see anything that can help me, please let me know. I don't believe that the new device has also a hardware failiure, because (as I wrote) it works for one time scanning and one time tuning... :-(
Hope to get help here,
Jens
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 62 lines · Jens Krehbiel-Gräther
Hi!
Here is the complete log.
syslog from loading the modules:
Feb 12 13:57:34 dev kernel: usb 3-6: new high speed USB device using ehci_hcd and address 3 Feb 12 13:57:34 dev kernel: usb 3-6: configuration #1 chosen from 1 choice Feb 12 13:57:34 dev kernel: dvb-usb: found a 'PCTV HDTV USB' in warm state. Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 1 Feb 12 13:57:34 dev kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Feb 12 13:57:34 dev kernel: DVB: registering new adapter (PCTV HDTV USB) Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Enter Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1b6]: 02 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c2]: 00 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf1c3]: 00 Feb 12 13:57:34 dev kernel: stb0899_write_regs [0xf141]: 02 Feb 12 13:57:34 dev kernel: _stb0899_read_reg: Reg=[0xf000], data=81 Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: ID reg=[0x81] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Device ID=[8], Release=[1] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331] Feb 12 13:57:34 dev kernel: _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001] Feb 12 13:57:34 dev kernel: stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] Feb 12 13:57:34 dev kernel: stb0899_attach: Attaching STB0899 Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 2 (18V=1 13V=0) Feb 12 13:57:34 dev kernel: lnbp22_set_voltage: 0x60) Feb 12 13:57:34 dev kernel: pctv452e_frontend_attach Leave Ok Feb 12 13:57:34 dev kernel: DVB: registering frontend 0 (STB0899 Multistandard)... Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Enter Feb 12 13:57:34 dev kernel: stb6100_attach: Attaching STB6100 Feb 12 13:57:34 dev kernel: pctv452e_tuner_attach Leave Feb 12 13:57:34 dev kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input5 Feb 12 13:57:34 dev kernel: dvb-usb: schedule remote query interval to 100 msecs. Feb 12 13:57:34 dev kernel: pctv452e_power_ctrl: 0 Feb 12 13:57:34 dev kernel: dvb-usb: PCTV HDTV USB successfully initialized and connected. Feb 12 13:57:34 dev kernel: usbcore: registered new interface driverpctv452e
And a complete log from a complete scan on Astra 19,2°E can you download here (about 1,6MB uncompressed, for Download 37kB gzip-File):
http://www.rz.uni-karlsruhe.de/~ry52/syslog.gzIf you see anything that can help me, please let me know. I don't believe that the new device has also a hardware failiure, because (as I wrote) it works for one time scanning and one time tuning... :-(
Quoted 10 lines
Hope to get help here,
Jens
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi
i have problems with DVBS on the driver.
i get PES errors
on DVBS2 its works
(vdr-1.5.14+h264 patch)
thanks
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT Connect S2-3600 (was: Pinnacle PCTV Sat HDTV Pro USB (PCTV452e) and DVB-S2)
In reply to a message not in the archiveQuoted 3 lines · Dominik Kuhlen
Hi all,
Manus multiproto HG tree (jusst.de/hg/multiproto) and the attached patch make the pctv452e work with DVB-S2 and DVB-S :)
Hi all,
I took Dominiks patch and added support for the TT connect S2-3600.
The S2-3600 is tuning to DVB-S and DVB-S2 but I still got some image distortions. I'm quite sure I got the correct firmware for the S2-3600 but I only did some quick testing last night. The patch may still have some quirks... so use at your own risk.
If anyone should volunteer to try the attached patch, please make sure to apply the patch for the PCTV 452e first! The firmware for the S2-3600 can be found here:
http://ilpss8.dyndns.org/dvb-usb-tt-connect-s2-3600-01.fw
I will also have a PCTV 452e for testing at the end of the week. So I can test both USB boxes with the driver.
André
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +2 -0
@@ -40,6 +40,7 @@#define USB_VID_MSI 0x0db0#define USB_VID_OPERA1 0x695c#define USB_VID_PINNACLE 0x2304 +#define USB_VID_TECHNOTREND 0x0b48#define USB_VID_TERRATEC 0x0ccd#define USB_VID_VISIONPLUS 0x13d3#define USB_VID_TWINHAN 0x1822
@@ -142,6 +143,7 @@#define USB_PID_PCTV_400E 0x020f#define USB_PID_PCTV_450E 0x0222#define USB_PID_PCTV_452E 0x021f +#define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007#define USB_PID_NEBULA_DIGITV 0x0201#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500
linux/drivers/media/dvb/dvb-usb/Kconfig +1 -1
@@ -240,7 +240,7 @@ Afatech AF9005 based receiver. config DVB_USB_PCTV452E - tristate "Pinnacle PCTV HDTV Pro USB device" + tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600" depends on DVB_USB select DVB_LNBP22 select DVB_STB0899
linux/drivers/media/dvb/dvb-usb/pctv452e.c +80 -6
133 lines not on this page · raw message
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT Connect S2-3600
Quoted 6 lines · André Weidemann
Quoted 4 lines · Dominik Kuhlen
Hi all,
Manus multiproto HG tree (jusst.de/hg/multiproto) and the attached patch make the pctv452e work with DVB-S2 and DVB-S :)
Quoted 6 lines
Hi all,
I took Dominiks patch and added support for the TT connect S2-3600.The S2-3600 is tuning to DVB-S and DVB-S2 but I still got some image distortions. I'm quite sure I got the correct firmware for the S2-3600 but I only did some quick testing last night.
What do you use to play back ? is the distortions seen with dvb-s2/h.264 only ?
Regards,
Manu
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT Connect S2-3600
Quoted 2 lines · Manu Abraham
What do you use to play back ? is the distortions seen with dvb-s2/h.264 only ?
I'm using vdr-1.5.12 with Reinhard Nissls h.264 patch and xine. Just for comparison... Tuning with the TT S2-3200 works for DVB-S and DVB-S2 channels. The picture quality great, no distortion at all.
I managed to get a Pinnacle 452e for testing. The Pinnacle 452e as well as the TT connect S2-3600 show image distortions on all channels. There is no difference between channels on a DVB-S or DVB-S2 transponders. BER and UNC seem to be zero, if the femon output can still be trusted for the multiproto drivers.
My patch for the TT connect S2-3600 is far from perfect. I will hopefully be able to post a new version this week.
I just saw, that you have committed some changes to the multiproto tree a few days ago. I will check out the repository tonight and see how things are now.
André
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT Connect S2-3600
In reply to André WeidemannQuoted 22 lines · André Weidemann
Quoted 4 lines · Dominik Kuhlen
Hi all,
Manus multiproto HG tree (jusst.de/hg/multiproto) and the attached patch make the pctv452e work with DVB-S2 and DVB-S :)
Hi all,
I took Dominiks patch and added support for the TT connect S2-3600.The S2-3600 is tuning to DVB-S and DVB-S2 but I still got some image distortions. I'm quite sure I got the correct firmware for the S2-3600 but I only did some quick testing last night.
The patch may still have some quirks... so use at your own risk.If anyone should volunteer to try the attached patch, please make sure to apply the patch for the PCTV 452e first!
The firmware for the S2-3600 can be found here:
http://ilpss8.dyndns.org/dvb-usb-tt-connect-s2-3600-01.fwI will also have a PCTV 452e for testing at the end of the week. So I can test both USB boxes with the driver.
Quoted 7 lines
André
------------------------------------------------------------------------_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi
I have the same problems, but only on DVBS on DVBS2 its works ok.
ernst
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb