Terratec Cinergy T USB XE

Hello, I have a Terratec Cinergy T USB XE, 0ccd:0069 and have been trying to compile from site:

http://www.jusst.de/hg/af901x/

My kernel is 2.6.22.5-31-x86_64.

I get the following error/warning messages when compiling:

CC [M] /usr/build/af901x/v4l/af9015.o
/usr/build/af901x/v4l/af9015.c: In function 'af901x_read_snr':
/usr/build/af901x/v4l/af9015.c:477: warning: array subscript is above array bounds
/usr/build/af901x/v4l/af9015.c: In function 'af901x_attach':
/usr/build/af901x/v4l/af9015.c:1608: warning: 'fw_ver' may be used uninitialized in this function
CC [M] /usr/build/af901x/v4l/af9015_biu.o
/usr/build/af901x/v4l/af9015_biu.c: In function 'af9015_read_eeprom':
/usr/build/af901x/v4l/af9015_biu.c:463: warning: unused variable 'eeprom_reg' /usr/build/af901x/v4l/af9015_biu.c: In function 'af9015_get_biu_config':
/usr/build/af901x/v4l/af9015_biu.c:685: warning: label 'exit' defined but not used
/usr/build/af901x/v4l/af9015_biu.c: In function 'af9015_epconfig_mode_15':

/usr/build/af901x/v4l/af9015_biu.c:817: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c:822: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c:829: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c:834: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c:841: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c:848: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c: In function 'af9015_epconfig_mode_17':
/usr/build/af901x/v4l/af9015_biu.c:963: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c:968: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c:974: warning: overflow in implicit constant conversion
/usr/build/af901x/v4l/af9015_biu.c: In function 'af9015_tuner_attach':
/usr/build/af901x/v4l/af9015_biu.c:1096: warning: unused variable 'err' /usr/build/af901x/v4l/af9015_biu.c: In function 'af9015_usb_probe':
/usr/build/af901x/v4l/af9015_biu.c:1167: warning: unused variable 'biu' /usr/build/af901x/v4l/af9015_biu.c: At top level:
/usr/build/af901x/v4l/af9015_biu.c:1138: warning: 'af9015_biu_epconfig' defined but not used

When I connect the stick it is recognised, firmware is downloaded and the tuner is attached according to the messages,
but when trying to scan dvb-t the tuning fails.

Do I need another kernel? I have tried 2.6.24 but it did not seem to work at all with http://www.jusst.de/hg/af901x/

Is the support for Terratec Cinergy T USB XE, 0ccd:0069 and the Freescale tuner going to http://linuxtv.org/hg/ for all kernels?

Is there anything I can do to solve this?

Thank you in advance

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

A group of people is putting effort into getting DVB-T USB sticks based on the rtl2831u chips working under Linux.
The group now consists of about 10 people working via this mailing list.

The current driver successfully compiles and loads on a modern Linux kernel, however it fails to communicate with the associated tuner chip.

We have just contacted RealTek for further help.
As soon as we know more, we'll let you know.
At that moment, we'll also send out more specific E-mails to those that own a similar stick and that have contacted either Barnaby or me.

I hope this E-mail with a status update is of help to you the readers of this list.

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb