Support for Samsung SMT7020
Hello List
The attached patch (written by Dirk Herrendoerfer) adds support for the builtin tuner of the samsung smt7020 box ( based on an Intel830 board ). It would be fine to see this one inside the v4l tree.
Signature · 1 line
Helmut Auer, [email protected]
linux/drivers/media/video/cx88/cx88-cards.c +27 -0
@@ -1362,6 +1362,19 @@ struct cx88_board cx88_boards[] = {/* fixme: Add radio support */ .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, }, + [CX88_BOARD_SAMSUNG_SMT_7020] = { + .name = "Samsung SMT 7020 DVB-S", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + }}, + .mpeg = CX88_MPEG_DVB, + }, + };const unsigned int cx88_bcount =ARRAY_SIZE (cx88_boards);
@@ -1664,6 +1677,14 @@ struct cx88_subid cx88_subids[] = { .subvendor = 0x0070, .subdevice = 0x1402, .card = CX88_BOARD_HAUPPAUGE_HVR3000, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdc00, + .card = CX88_BOARD_SAMSUNG_SMT_7020, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdccd, + .card = CX88_BOARD_SAMSUNG_SMT_7020, },{ .subvendor = 0x1461, const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
@@ -1955,6 +1973,12 @@ void cx88_card_setup(struct cx88_core *c core->name, i); }break ; +case CX88_BOARD_SAMSUNG_SMT_7020 : +cx_set (MO_GP0_IO ,0x008989FF ); +//cx_set(MO_GP3_IO, 0x00000000); +printk ("!!Samsung RESET done.\n" ); +break ; + }if (cx88_boards[core->board].radio.type ==CX88_RADIO ) core->has_radio =1 ;
linux/drivers/media/video/cx88/cx88-dvb.c +210 -0
228 lines not on this page · raw message
linux/drivers/media/video/cx88/cx88-mpeg.c +3 -0
@@ -98,6 +98,9 @@ static int cx8802_start_dma(struct cx880case CX88_BOARD_PCHDTV_HD5500 :cx_write (TS_SOP_STAT ,1 <<13 );break ; +case CX88_BOARD_SAMSUNG_SMT_7020 : +cx_write (TS_SOP_STAT ,0x00 ); +break ;case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1 :case CX88_BOARD_HAUPPAUGE_NOVASE2_S1 :cx_write (MO_PINMUX_IO ,0x88 );/* Enable MPEG parallel IO and video signal pins */
linux/drivers/media/video/cx88/cx88.h +1 -0
@@ -212,6 +212,7 @@ extern struct sram_channel cx88_sram_cha#define CX88_BOARD_HAUPPAUGE_HVR1300 56#define CX88_BOARD_ADSTECH_PTV_390 57#define CX88_BOARD_PINNACLE_PCTV_HD_800i 58 +#define CX88_BOARD_SAMSUNG_SMT_7020 59enum cx88_itype {CX88_VMUX_COMPOSITE1 =1 ,
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Helmut,
Quoted 6 lines · On Thu, 14 Feb 2008 20:13:02 +0100 Helmut Auer <[email protected]> wrote:
Hello List
The attached patch (written by Dirk Herrendoerfer) adds support for the builtin tuner of the samsung smt7020 box ( based on an Intel830 board ). It would be fine to see this one inside the v4l tree.
Only today I noticed your patch, after starting to use a tool that digs patches at the ML and creates a queue.
This patch have a few troubles:
1) It lacks your SOB (and also Dirk's SOB);
2) the smt7020 frontend code should be outside cx88-dvb. You need to create a separate module for this frontend, like for example cx24123.c;
3) there are a few CodingStyle errors.
Please review and submit it again.
Cheers,
Mauro
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb