Skip to contentSkip to conversation

x86_64: split cpuinfo from setup_64.c into cpu/proc_64.c

PATCH In review Hiroshi Shimamoto 2 participants 6 messages Feb 20, 2008 – Feb 21, 2008 x86

lore
Share & tools
lore
#0 lore raw

PATCH 1/5 x86_64: split cpuinfo from setup_64.c into cpu/proc_64.c

From: Hiroshi Shimamoto <[email protected]>

x86 /proc/cpuinfo code can be unified.
This is the first step of unification.

---
 arch/x86/kernel/cpu/Makefile  |    1 +
 arch/x86/kernel/cpu/proc_64.c |  126 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/setup_64.c    |  120 ---------------------------------------
 3 files changed, 127 insertions(+), 120 deletions(-)
 create mode 100644 arch/x86/kernel/cpu/proc_64.c
arch/x86/kernel/cpu/Makefile +1 -0
index a0c4d7c..8ba7d28 100644
@@ -13,6 +13,7 @@ obj-$(CONFIG_X86_32)	+= transmeta.o
 obj-$(CONFIG_X86_32)	+= intel.o
 obj-$(CONFIG_X86_32)	+= nexgen.o
 obj-$(CONFIG_X86_32)	+= umc.o
+obj-$(CONFIG_X86_64)	+= proc_64.o
 
 obj-$(CONFIG_X86_MCE)	+= mcheck/
 obj-$(CONFIG_MTRR)	+= mtrr/
arch/x86/kernel/cpu/proc_64.c new file +126 -0

126 lines not on this page · raw message

arch/x86/kernel/setup_64.c +0 -120

123 lines not on this page · raw message

Signature · 1 line
1.5.3.8
#1 lore raw

PATCH 2/5 x86: make cpu/proc|_64.c similar

From: Hiroshi Shimamoto <[email protected]>

clean up for unification.

---
 arch/x86/kernel/cpu/proc.c    |  120 +++++++++++++++++++++++-----------------
 arch/x86/kernel/cpu/proc_64.c |   63 ++++++++++++---------
 2 files changed, 105 insertions(+), 78 deletions(-)
arch/x86/kernel/cpu/proc.c +69 -51
index af11d31..9bc3b04 100644
@@ -8,75 +8,90 @@
 /*
  *	Get CPU information for use by the procfs.
  */
+static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
+			      unsigned int cpu)
+{
+#ifdef CONFIG_X86_HT
+	if (c->x86_max_cores * smp_num_siblings > 1) {
+		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
+		seq_printf(m, "siblings\t: %d\n",
+			   cpus_weight(per_cpu(cpu_core_map, cpu)));
+		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
+		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
+	}
+#endif
+}
+
+static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
+{
+	/*
+	 * We use exception 16 if we have hardware math and we've either seen
+	 * it or the CPU claims it is internal
+	 */
+	int fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
+	seq_printf(m,
+		   "fdiv_bug\t: %s\n"
+		   "hlt_bug\t\t: %s\n"
+		   "f00f_bug\t: %s\n"
+		   "coma_bug\t: %s\n"
+		   "fpu\t\t: %s\n"
+		   "fpu_exception\t: %s\n"
+		   "cpuid level\t: %d\n"
+		   "wp\t\t: %s\n",
+		   c->fdiv_bug ? "yes" : "no",
+		   c->hlt_works_ok ? "no" : "yes",
+		   c->f00f_bug ? "yes" : "no",
+		   c->coma_bug ? "yes" : "no",
+		   c->hard_math ? "yes" : "no",
+		   fpu_exception ? "yes" : "no",
+		   c->cpuid_level,
+		   c->wp_works_ok ? "yes" : "no");
+}
+
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	struct cpuinfo_x86 *c = v;
-	int i, n = 0;
-	int fpu_exception;
+	unsigned int cpu = 0;
+	int i;
 
 #ifdef CONFIG_SMP
-	n = c->cpu_index;
+	cpu = c->cpu_index;
 #endif
-	seq_printf(m, "processor\t: %d\n"
-		"vendor_id\t: %s\n"
-		"cpu family\t: %d\n"
-		"model\t\t: %d\n"
-		"model name\t: %s\n",
-		n,
-		c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
-		c->x86,
-		c->x86_model,
-		c->x86_model_id[0] ? c->x86_model_id : "unknown");
+	seq_printf(m, "processor\t: %u\n"
+		   "vendor_id\t: %s\n"
+		   "cpu family\t: %d\n"
+		   "model\t\t: %u\n"
+		   "model name\t: %s\n",
+		   cpu,
+		   c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+		   c->x86,
+		   c->x86_model,
+		   c->x86_model_id[0] ? c->x86_model_id : "unknown");
 
 	if (c->x86_mask || c->cpuid_level >= 0)
 		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
 	else
 		seq_printf(m, "stepping\t: unknown\n");
 
-	if ( cpu_has(c, X86_FEATURE_TSC) ) {
-		unsigned int freq = cpufreq_quick_get(n);
+	if (cpu_has(c, X86_FEATURE_TSC)) {
+		unsigned int freq = cpufreq_quick_get(cpu);
+
 		if (!freq)
 			freq = cpu_khz;
 		seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
-			freq / 1000, (freq % 1000));
+			   freq / 1000, (freq % 1000));
 	}
 
 	/* Cache size */
 	if (c->x86_cache_size >= 0)
 		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-#ifdef CONFIG_X86_HT
-	if (c->x86_max_cores * smp_num_siblings > 1) {
-		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
-		seq_printf(m, "siblings\t: %d\n",
-				cpus_weight(per_cpu(cpu_core_map, n)));
-		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
-		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
-	}
-#endif
-	
-	/* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
-	fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
-	seq_printf(m, "fdiv_bug\t: %s\n"
-			"hlt_bug\t\t: %s\n"
-			"f00f_bug\t: %s\n"
-			"coma_bug\t: %s\n"
-			"fpu\t\t: %s\n"
-			"fpu_exception\t: %s\n"
-			"cpuid level\t: %d\n"
-			"wp\t\t: %s\n"
-			"flags\t\t:",
-		     c->fdiv_bug ? "yes" : "no",
-		     c->hlt_works_ok ? "no" : "yes",
-		     c->f00f_bug ? "yes" : "no",
-		     c->coma_bug ? "yes" : "no",
-		     c->hard_math ? "yes" : "no",
-		     fpu_exception ? "yes" : "no",
-		     c->cpuid_level,
-		     c->wp_works_ok ? "yes" : "no");
-
-	for ( i = 0 ; i < 32*NCAPINTS ; i++ )
-		if ( test_bit(i, c->x86_capability) &&
-		     x86_cap_flags[i] != NULL )
+
+	show_cpuinfo_core(m, c, cpu);
+	show_cpuinfo_misc(m, c);
+
+	seq_printf(m, "flags\t\t:");
+	for (i = 0; i < 32*NCAPINTS; i++)
+		if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
 			seq_printf(m, " %s", x86_cap_flags[i]);
 
 	for (i = 0; i < 32; i++)
@@ -91,8 +106,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		}
 
 	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
-		     c->loops_per_jiffy/(500000/HZ),
-		     (c->loops_per_jiffy/(5000/HZ)) % 100);
+		   c->loops_per_jiffy/(500000/HZ),
+		   (c->loops_per_jiffy/(5000/HZ)) % 100);
 	seq_printf(m, "clflush size\t: %u\n\n", c->x86_clflush_size);
 
 	return 0;
@@ -106,14 +121,17 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 		return &cpu_data(*pos);
 	return NULL;
 }
+
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	*pos = next_cpu(*pos, cpu_online_map);
 	return c_start(m, pos);
 }
+
 static void c_stop(struct seq_file *m, void *v)
 {
 }
+
 const struct seq_operations cpuinfo_op = {
 	.start	= c_start,
 	.next	= c_next,
arch/x86/kernel/cpu/proc_64.c +36 -27

100 lines not on this page · raw message

Signature · 1 line
1.5.3.8
#2 lore raw

PATCH 3/5 x86_32: add power management line in /proc/cpuinfo

In reply to Hiroshi Shimamoto

From: Hiroshi Shimamoto <[email protected]>

Change /proc/cpuinfo. It will look like x86_64's. 'power management' line is added and power management information will be printed at the line.

---
 arch/x86/kernel/cpu/proc.c |   14 +++++++++-----
 1 files changed, 9 insertions(+), 5 deletions(-)
arch/x86/kernel/cpu/proc.c +9 -5
index 9bc3b04..fd3823a 100644
@@ -94,7 +94,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
 			seq_printf(m, " %s", x86_cap_flags[i]);
 
-	for (i = 0; i < 32; i++)
+	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
+		   c->loops_per_jiffy/(500000/HZ),
+		   (c->loops_per_jiffy/(5000/HZ)) % 100);
+	seq_printf(m, "clflush size\t: %u\n", c->x86_clflush_size);
+
+	seq_printf(m, "power management:");
+	for (i = 0; i < 32; i++) {
 		if (c->x86_power & (1 << i)) {
 			if (i < ARRAY_SIZE(x86_power_flags) &&
 			    x86_power_flags[i])
@@ -104,11 +110,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			else
 				seq_printf(m, " [%d]", i);
 		}
+	}
 
-	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
-		   c->loops_per_jiffy/(500000/HZ),
-		   (c->loops_per_jiffy/(5000/HZ)) % 100);
-	seq_printf(m, "clflush size\t: %u\n\n", c->x86_clflush_size);
+	seq_printf(m, "\n\n");
 
 	return 0;
 }
Signature · 1 line
1.5.3.8
#3 lore raw

PATCH 4/5 x86: cosmetic unification cpu/proc|_64.c

In reply to Hiroshi Shimamoto

From: Hiroshi Shimamoto <[email protected]>

make cpu/proc.c and cpu/proc_64.c same.

---
 arch/x86/kernel/cpu/proc.c    |   36 ++++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/proc_64.c |   49 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 83 insertions(+), 2 deletions(-)
arch/x86/kernel/cpu/proc.c +36 -0
index fd3823a..15043a3 100644
@@ -8,6 +8,7 @@
 /*
  *	Get CPU information for use by the procfs.
  */
+#ifdef CONFIG_X86_32
 static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
 			      unsigned int cpu)
 {
@@ -47,6 +48,31 @@ static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
 		   c->cpuid_level,
 		   c->wp_works_ok ? "yes" : "no");
 }
+#else
+static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
+			      unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+	if (c->x86_max_cores * smp_num_siblings > 1) {
+		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
+		seq_printf(m, "siblings\t: %d\n",
+			   cpus_weight(per_cpu(cpu_core_map, cpu)));
+		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
+		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
+	}
+#endif
+}
+
+static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
+{
+	seq_printf(m,
+		   "fpu\t\t: yes\n"
+		   "fpu_exception\t: yes\n"
+		   "cpuid level\t: %d\n"
+		   "wp\t\t: yes\n",
+		   c->cpuid_level);
+}
+#endif
 
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
@@ -97,7 +123,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
 		   c->loops_per_jiffy/(500000/HZ),
 		   (c->loops_per_jiffy/(5000/HZ)) % 100);
+
+#ifdef CONFIG_X86_64
+	if (c->x86_tlbsize > 0)
+		seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
+#endif
 	seq_printf(m, "clflush size\t: %u\n", c->x86_clflush_size);
+#ifdef CONFIG_X86_64
+	seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
+	seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
+		   c->x86_phys_bits, c->x86_virt_bits);
+#endif
 
 	seq_printf(m, "power management:");
 	for (i = 0; i < 32; i++) {
arch/x86/kernel/cpu/proc_64.c +47 -2

72 lines not on this page · raw message

Signature · 1 line
1.5.3.8
#4 lore raw

PATCH 5/5 x86: unify cpu/proc|_64.c

In reply to Hiroshi Shimamoto

From: Hiroshi Shimamoto <[email protected]>

Now cpu/proc.c and cpu/proc_64.c are same.
So cpu/proc_64.c can be removed.

---
 arch/x86/kernel/cpu/Makefile  |    5 +-
 arch/x86/kernel/cpu/proc_64.c |  180 -----------------------------------------
 2 files changed, 2 insertions(+), 183 deletions(-)
 delete mode 100644 arch/x86/kernel/cpu/proc_64.c
arch/x86/kernel/cpu/Makefile +2 -3
index 8ba7d28..ee7c452 100644
@@ -3,9 +3,9 @@
 #
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
-obj-y			+= feature_names.o
+obj-y			+= proc.o feature_names.o
 
-obj-$(CONFIG_X86_32)	+= common.o proc.o bugs.o
+obj-$(CONFIG_X86_32)	+= common.o bugs.o
 obj-$(CONFIG_X86_32)	+= amd.o
 obj-$(CONFIG_X86_32)	+= cyrix.o
 obj-$(CONFIG_X86_32)	+= centaur.o
@@ -13,7 +13,6 @@ obj-$(CONFIG_X86_32)	+= transmeta.o
 obj-$(CONFIG_X86_32)	+= intel.o
 obj-$(CONFIG_X86_32)	+= nexgen.o
 obj-$(CONFIG_X86_32)	+= umc.o
-obj-$(CONFIG_X86_64)	+= proc_64.o
 
 obj-$(CONFIG_X86_MCE)	+= mcheck/
 obj-$(CONFIG_MTRR)	+= mtrr/
arch/x86/kernel/cpu/proc_64.c deleted +0 -180

180 lines not on this page · raw message

Signature · 1 line
1.5.3.8
#5 lore raw

Re: [PATCH 5/5] x86: unify cpu/proc|_64.c

Quoted 4 lines · Hiroshi Shimamoto

From: Hiroshi Shimamoto <[email protected]>

Now cpu/proc.c and cpu/proc_64.c are same.
So cpu/proc_64.c can be removed.

thanks Hiroshi, very nicely done! I've applied all 5 patches.

Ingo