Skip to contentSkip to conversation

dm9161: add configuration for MII/RMII

PATCH Applied frederic Rodo 2 participants 2 messages Feb 27, 2008 – Mar 5, 2008

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dm9161: add configuration for MII/RMII

Hi Jeff,

I've send this patch on netdev on January. It's add the MII/RMII configuration for davicom dm9161. Can you merge it into the mainline?

thanks

drivers/net/phy/davicom.c +15 -3
index 7ed632d..6bdc32f 100644
@@ -37,6 +37,7 @@
 
 #define MII_DM9161_SCR        0x10
 #define MII_DM9161_SCR_INIT    0x0610
+#define MII_DM9161_SCR_RMII    0x0100
 
 /* DM9161 Interrupt Register */
 #define MII_DM9161_INTR    0x15
@@ -103,7 +104,7 @@ static int dm9161_config_aneg(struct phy_device *phydev)
 
 static int dm9161_config_init(struct phy_device *phydev)
 {
-    int err;
+    int err, temp;
 
     /* Isolate the PHY */
     err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
@@ -111,8 +112,19 @@ static int dm9161_config_init(struct phy_device *phydev)
     if (err < 0)
         return err;
 
-    /* Do not bypass the scrambler/descrambler */
-    err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+    /* Do not bypass the scrambler/descrambler , configure MII Mode */
+    switch (phydev->interface) {
+    case PHY_INTERFACE_MODE_MII:
+        temp = MII_DM9161_SCR_INIT;
+        break;
+    case PHY_INTERFACE_MODE_RMII:
+        temp =  MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII;
+        break;
+    default:
+        return -EINVAL;
+    }
+
+    err = phy_write(phydev, MII_DM9161_SCR, temp);
 
     if (err < 0)
         return err;

-------------------------------------------------------------------------
Les informations précédentes peuvent être confidentielles ou privilégiées.
Si vous n'êtes pas le destinataire prévu de ce mail, veuillez en notifier l'expéditeur en répondant à ce message puis supprimez-en toute trace de vos systèmes.

TIL Technologies
Parc du Golf, Bat 43
350 rue J.R Guilibert Gautier de la Lauzière 13856 AIX EN PROVENCE Tel. : +33 4 42 37 11 77
-------------------------------------------------------------------------