Skip to contentSkip to conversation

Toggling preemption on a running kernel

DISCUSSION Matthew Hodgson 2 participants 2 messages Mar 7, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to compare the performance of some networking code (throughput and latency when receiving various volumes of UDP streams) between a preemptible and non-preemptible 2.6.24 kernel, and was wondering if it is possible to temporarily disable preemption on a running preemptible kernel. Is it just a matter of loading a module which calls preempt_enable() at load and preempt_disable() at unload - or is that too naive? Is there an existing way of doing this?

thanks,

Matthew.

Signature · 4 lines
Matthew Hodgson <[email protected]>
Media & Systems Project Manager
Tel: +44 (0) 845 666 7778
http://www.mxtelecom.com
#1 lore raw
Quoted 4 lines · Matthew Hodgson

Hi,

I'm trying to compare the performance of some networking code (throughput and latency when receiving various volumes of UDP streams) between a preemptible and non-preemptible 2.6.24 kernel, and was wondering if it is possible to temporarily disable preemption on a running preemptible kernel. Is it just a matter of loading a module which calls preempt_enable() at load and preempt_disable() at unload - or is that too naive? Is there an existing way of doing this?

That wouldn't get rid of all the code to support preempt, so it wouldn't be useful for comparing much of anything. I think you need to build two identical kernels here, with only one difference.

Signature · 3 lines
Bill Davidsen <[email protected]>
  "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot