sh: Add Ethernet support for MPR2 board
PATCH 1/1 sh: Add Ethernet support for MPR2 board
Hello,
the attached patch adds a driver for the SMSC LAN911x and LAN921x family of Ethernet controllers. The patch also
enables the use of this driver on the SH7720 based MPR2 board.
Please note that the network driver does not obey the U-Boot coding style at all. The reason is that the driver is
supplied like that by SMSC on their web page. I only modified it such that it not only supports the LAN9x18 but
also the LAN9x15. And I removed CRLFs.
My reasoning for leaving the driver as is that if SMSC updates the driver on their web page it will be easier to
get the changes into U-Boot as well.
Regards,
Mark Jonas
CHANGELOG:
----------
sh: Added support for SMSC LAN9115 networking on MPR2 board.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot_mpr2_lan9115_20080307.patch.bz2
Type: application/x-bzip2
Size: 10375 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080307/fe1917b3/attachment.bin
PATCH 1/1 sh: Add Ethernet support for MPR2 board
Hi Mark,
Quoted 12 lines · Mark Jonas
Hello,
the attached patch adds a driver for the SMSC LAN911x and LAN921x family of Ethernet controllers. The patch also
enables the use of this driver on the SH7720 based MPR2 board.Please note that the network driver does not obey the U-Boot coding style at all. The reason is that the driver is
supplied like that by SMSC on their web page. I only modified it such that it not only supports the LAN9x18 but
also the LAN9x15. And I removed CRLFs.
Quoted 5 lines
My reasoning for leaving the driver as is that if SMSC updates the driver on their web page it will be easier to
get the changes into U-Boot as well.
Your intentions are good, but you have to know that there's no way this driver is going into U-boot unless it meets the coding standards. There are many reasons for this policy, but suffice to say it just ain't gonna happen.
If you clean it up, we'll put it in. Also, sending patches zipped up is uncool. Please send as inline text and break up logically if you need to.
regards,
Ben
PATCH 1/1 sh: Add Ethernet support for MPR2 board
Hi Ben,
Quoted 4 lines
Your intentions are good, but you have to know that there's no way this driver is going into U-boot unless it meets the coding standards. There are many reasons for this policy, but suffice to say it just ain't gonna happen.
OK, I somehow thought so but isn't there this clause in the U-Boot Readme:
"Source files originating from a different project (for example the MTD subsystem) are generally exempt from these guidelines and are not reformated to ease subsequent migration to newer versions of those sources."
Quoted 2 lines
If you clean it up, we'll put it in. Also, sending patches zipped up is uncool. Please send as inline text and break up logically if you need to.
Maybe I am uncool but I just obeyed the Readme:
"* Remember that there is a size limit of 40 kB per message on the
u-boot-users mailing list. Compression may help."
IMHO I broke it up logically into two patches. One containing the mpr2 board code and one the Ethernet driver extension. The driver itself does not make sense to add to U-Boot if nobody is using it. My changes to the mpr2 board to add Ethernet support do not make sense without the driver.
Is it worth the effort splitting this patch into two pieces without adjusting the driver's formatting or should I really forget it?
Regards,
Mark