Skip to contentSkip to conversation

Kernel Linux 2.6.23.16 hangs when run updatedb

DISCUSSION Renato S. Yamane 2 participants 4 messages Mar 10, 2008 – Mar 11, 2008

Subsystems (9)
lore
Share & tools
lore
#0 lore raw

cc'd: Thomas Gleixner
cc'd: Ingo Molnar
About hrtimer comment by Alan Jenkins

Quoted 45 lines · Alan Jenkins
Quoted 21 lines · Renato S. Yamane
Quoted 20 lines · [email protected] wrote:
Quoted 6 lines · Renato S. Yamane

when cron start updatedb daemon, my machine hangs. None key work, so I need reset (press power button to restart).

The only way to get log is runing updatedb from terminal (CTRL + ALT + F1) and take a picture from screen:

Quoted 8 lines

Up screen:
<http://img137.imageshack.us/img137/7128/01pg1.jpg>

Down screen:
<http://img100.imageshack.us/img100/1456/02kx1.jpg>

Call trace detail:
<http://img100.imageshack.us/img100/8233/calltracedetailsj7.jpg>

looks like reiserfs issue.
maybe corrupt filesystem and improper handling of the reiserfs-driver?

Quoted 7 lines
Quoted 1 line

could you try some "find /" ?

"find /" don't hangs my machine.
The problem is only with updatedb.

How can I fix this? Is safe run reiserfsck?

I think he's wrong.

Looking at the call trace, the BUG happens during an interrupt. It could be a coincidence that the interrupt happened during this particular system call.

It looks like a timer callback has been corrupted / set to an invalid value. The BUG is due to accessing the invalid address 61060fe0 within enqueue_hrtimer, and the EIP (instruction pointer) is also equal to 61060fe0. This would be consistent with the source code of enqueue_hrtimer. It's not an obvious reiserfs issue.

I don't know how to find out where this corruption is happening, but it's worth asking the hrtimers people.

#1 lore raw
Quoted 9 lines · Renato S. Yamane
Quoted 9 lines
Quoted 1 line

How can I fix this? Is safe run reiserfsck?

I think he's wrong.

Looking at the call trace, the BUG happens during an interrupt. It could be a coincidence that the interrupt happened during this particular system call.

Quoted 5 lines
Quoted 5 lines

It looks like a timer callback has been corrupted / set to an invalid value. The BUG is due to accessing the invalid address 61060fe0 within enqueue_hrtimer, and the EIP (instruction pointer) is also equal to 61060fe0. This would be consistent with the source code of enqueue_hrtimer. It's not an obvious reiserfs issue.

It's pretty inconsistent with the source code of enqueue_hrtimer().

The only possibility to have a callback from enqueue_hrtimer() is in hrtimer_enqueue_reprogram() in the HRTIMER_CB_IRQSAFE_NO_RESTART case. Such timers can not be requeued in interrupt context, hence the name HRTIMER_CB_IRQSAFE_NO_RESTART :)

Also in hrtimer_interrupt context, hrtimer_enqueue() is called with reprogram = 0, which ensures that we do not call hrtimer_enqueue_reprogram().

Quoted 2 lines
Quoted 2 lines

I don't know how to find out where this corruption is happening, but it's worth asking the hrtimers people.

Let's gather some more information.

Renato, some questions:

1) is this fully reproducible with updatedb ?

2) are you sure that this is the first stacktrace you captured, there might be some BUG before that which scrolled out of sight. Any chance to use a serial console ?

3) Can you please recompile the kernel with CONFIF_DEBUG_INFO set and then run the following addresses from the backtrace through addr2line with the new vmlinux:

# addr2line -e vmlinux 0xc013dad9 0xc0107c3b

Please provide the output.

4) Looking at your .config it seems you have some more patches applied aside of the .16 stable. Can you please upload a full patch queue somewhere ?

Thanks,

tglx

#2 lore raw

Hi Thomas,

Quoted 2 lines · Thomas Gleixner

Renato, some questions:
1) is this fully reproducible with updatedb ?

Yes, this crash is fully reproducible.
All time wich I turn-on my laptopt I need kill find daemon in my Debian Etch. If I don't do that, my laptop hangs.

Quoted 3 lines

2) are you sure that this is the first stacktrace you captured, there might be some BUG before that which scrolled out of sight. Any chance to use a serial console?

I can't use scroll, because none key/mouse work after crash. And, sorry I can't use a serial console. Any other idea?

Quoted 4 lines

3) Can you please recompile the kernel with CONFIF_DEBUG_INFO set and then run the following addresses from the backtrace through addr2line with the new vmlinux:

# addr2line -e vmlinux 0xc013dad9 0xc0107c3b

Yes, I try compile 2.6.24.3 without any patch.

Quoted 3 lines

4) Looking at your .config it seems you have some more patches applied aside of the .16 stable. Can you please upload a full patch queue somewhere ?

I attached all patchs used in my 2.6.23.16.

Regards,
Renato S. Yamane

================

arch/i386/Kconfig.debug +1 -0
@@ -59,6 +59,7 @@
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on DEBUG_KERNEL
+	default y
 	help
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates

Genetic I/O CFQ scheduler support.

block/cfq-iosched.c +398 -11

473 lines not on this page · raw message

block/Kconfig.iosched +9 -0
Index: linux.2.6.23/block/Kconfig.iosched
===================================================================
@@ -77,6 +77,15 @@
         anticipatory scheduler autonomically and will adapt tunables
         depending on the present workload.
 
+config GENETIC_IOSCHED_CFQ
+        bool "Genetic CFQ I/O scheduler (EXPERIMENTAL)"
+        depends on IOSCHED_CFQ && GENETIC_LIB && EXPERIMENTAL
+        default n
+        ---help---
+        This will use a genetic algorithm to tweak the tunables of the
+        CFQ scheduler autonomically and will adapt tunables
+        depending on the present workload.
+
 endmenu
 
 endif
block/genhd.c +18 -6
Index: linux/block/genhd.c
===================================================================
@@ -30,6 +30,8 @@ static struct blk_major_name {
 	char name[16];
 } *major_names[BLKDEV_MAJOR_HASH_SIZE];
 
+LIST_HEAD(gendisks);
+
 /* index in the above - for now: assume no multimajor ranges */
 static inline int major_to_index(int major)
 {
@@ -395,19 +397,22 @@ static ssize_t disk_stats_read(struct ge
 		jiffies_to_msecs(disk_stat_read(disk, io_ticks)),
 		jiffies_to_msecs(disk_stat_read(disk, time_in_queue)));
 }
+
+#ifdef CONFIG_FINGERPRINTING
 static ssize_t disk_fp_read(struct gendisk * disk, char *page)
 {
-	return sprintf(page, "reads: %llx\n"
-		       "writes: %llx\n"
-		       "head_pos: %llx\n"
-		       "avg_dist: %llx\n"
-		       "avg_size: %llx\n",
+	return sprintf(page, "reads: %lld\n"
+		       "writes: %lld\n"
+		       "head_pos: %lld\n"
+		       "avg_dist: %lld\n"
+		       "avg_size: %lld\n",
 		       (unsigned long long)disk->fp_ss->reads,
 		       (unsigned long long)disk->fp_ss->writes,
 		       (unsigned long long)disk->fp_ss->head_pos,
 		       (unsigned long long)disk->fp_ss->avg_dist,
 		       (unsigned long long)disk->fp_ss->avg_size);
 }
+#endif
 
 static struct disk_attribute disk_attr_uevent = {
 	.attr = {.name = "uevent", .mode = S_IWUSR },
@@ -433,10 +438,13 @@ static struct disk_attribute disk_attr_s
 	.attr = {.name = "stat", .mode = S_IRUGO },
 	.show	= disk_stats_read
 };
+
+#ifdef CONFIG_FINGERPRINTING
 static struct disk_attribute disk_attr_fp = {
 	.attr = {.name = "fp", .mode = S_IRUGO },
 	.show	= disk_fp_read
 };
+#endif
 
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 
@@ -476,7 +484,9 @@ static struct attribute * default_attrs[
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 	&disk_attr_fail.attr,
 #endif
-	&disk_attr_fp.attr,
+#ifdef CONFIG_FINGERPRINTING
+        &disk_attr_fp.attr,
+#endif
 	NULL,
 };
 
@@ -485,6 +495,7 @@ static void disk_release(struct kobject 
 	struct gendisk *disk = to_disk(kobj);
 	kfree(disk->random);
 	kfree(disk->part);
+	list_del(&disk->gendisks);
 	free_disk_stats(disk);
 	kfree(disk);
 }
@@ -685,8 +696,9 @@ struct gendisk *alloc_disk_node(int mino
 		kobj_set_kset_s(disk,block_subsys);
 		kobject_init(&disk->kobj);
 		rand_initialize_disk(disk);
+		list_add_tail(&disk->gendisks, &gendisks);
 		INIT_WORK(&disk->async_notify,
 			media_change_notify_thread);
 	}
 
 	disk->fp_ss = kmalloc(sizeof(struct fp_snapshot), GFP_KERNEL);
block/ll_rw_blk.c +138 -0

150 lines not on this page · raw message

include/linux/genhd.h +1 -0
Index: linux/include/linux/genhd.h
===================================================================
@@ -134,6 +134,7 @@ struct gendisk {
 	atomic_t sync_io;		/* RAID */
 	unsigned long stamp;
 	int in_flight;
+	struct list_head gendisks;
 #ifdef	CONFIG_SMP
 	struct disk_stats *dkstats;
 #else
include/linux/blkdev.h +14 -0
Index: linux/include/linux/blkdev.h
===================================================================
@@ -861,6 +861,20 @@ void kblockd_flush_work(struct work_stru
 	MODULE_ALIAS("block-major-" __stringify(major) "-*")
 
 
+#if defined(CONFIG_GENETIC_IOSCHED_AS) || \
+    defined(CONFIG_GENETIC_IOSCHED_DEADLINE) || \
+    defined(CONFIG_GENETIC_IOSCHED_CFQ)
+
+struct disk_stats_snapshot
+{
+        unsigned long reads;
+        unsigned long writes;
+        unsigned long read_sectors;
+        unsigned long write_sectors;
+        unsigned long time_in_queue;
+};
+#endif /* CONFIG_GENETIC_IOSCHED_AS || CONFIG_GENETIC_IOSCHED_CFQ */
+
 #else /* CONFIG_BLOCK */
 /*
  * stubs for when the block layer is configured out
include/linux/genetic.h new file +285 -0

285 lines not on this page · raw message

lib/Kconfig +6 -0
Index: linux-2.6.23/lib/Kconfig
===================================================================
@@ -63,6 +63,12 @@ config AUDIT_GENERIC
 	depends on AUDIT && !AUDIT_ARCH
 	default y
 
+config GENETIC_LIB
+	bool "Genetic Library"
+	help
+	  This option will build in a genetic library that will tweak
+	  kernel parameters autonomically to improve performance.
+
 #
 # compression support is select'ed if needed
 #
lib/Makefile +1 -0
Index: linux-2.6.23/lib/Makefile
===================================================================
@@ -47,6 +47,7 @@ obj-$(CONFIG_CRC32)	+= crc32.o
 obj-$(CONFIG_CRC7)	+= crc7.o
 obj-$(CONFIG_LIBCRC32C)	+= libcrc32c.o
 obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
+obj-$(CONFIG_GENETIC_LIB) += genetic.o
 
 obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
 obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
lib/genetic.c new file +892 -0

892 lines not on this page · raw message

lib/genetic-debug.c new file +153 -0

153 lines not on this page · raw message

lib/fingerprinting.c new file +291 -0

291 lines not on this page · raw message

include/linux/fingerprinting.h new file +125 -0

125 lines not on this page · raw message

block/fingerprinting.c new file +205 -0

205 lines not on this page · raw message

block/ll_rw_blk.c +4 -0
Index: linux-2.6.23/block/ll_rw_blk.c
===================================================================
@@ -30,6 +30,7 @@
 #include <linux/cpu.h>
 #include <linux/blktrace_api.h>
 #include <linux/fault-inject.h>
+#include <linux/fingerprinting.h>
 
 /*
  * for max sense size
@@ -2893,6 +2894,9 @@ static void init_request_from_bio(struct
 {
 	req->cmd_type = REQ_TYPE_FS;
 
+#ifdef CONFIG_FINGERPRINTING
+	update_fp_snapshot(bio);
+#endif
 	/*
 	 * inherit FAILFAST from bio (for read-ahead, and explicit FAILFAST)
 	 */
include/linux/genhd.h +2 -0
Index: linux-2.6.23/include/linux/genhd.h
===================================================================
@@ -67,6 +67,7 @@ struct partition {
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/workqueue.h>
+#include <linux/fingerprinting.h>
 
 struct partition {
 	unsigned char boot_ind;		/* 0x80 - active */
@@ -91,6 +92,7 @@ struct gendisk {
 	struct disk_stats dkstats;
 #endif
 	struct work_struct async_notify;
+	struct fp_snapshot * fp_ss;
 };
 
 /* Structure for sysfs attributes on block devices */
block/genhd.c +23 -0
Index: linux-2.6.23/block/genhd.c
===================================================================
@@ -445,6 +445,20 @@ static ssize_t disk_stats_read(struct ge
 		jiffies_to_msecs(disk_stat_read(disk, io_ticks)),
 		jiffies_to_msecs(disk_stat_read(disk, time_in_queue)));
 }
+static ssize_t disk_fp_read(struct gendisk * disk, char *page)
+{
+	return sprintf(page, "reads: %llx\n"
+		       "writes: %llx\n"
+		       "head_pos: %llx\n"
+		       "avg_dist: %llx\n"
+		       "avg_size: %llx\n",
+		       (unsigned long long)disk->fp_ss->reads,
+		       (unsigned long long)disk->fp_ss->writes,
+		       (unsigned long long)disk->fp_ss->head_pos,
+		       (unsigned long long)disk->fp_ss->avg_dist,
+		       (unsigned long long)disk->fp_ss->avg_size);
+}
+
 static struct disk_attribute disk_attr_uevent = {
 	.attr = {.name = "uevent", .mode = S_IWUSR },
 	.store	= disk_uevent_store
@@ -473,6 +487,10 @@ static struct disk_attribute disk_attr_s
 	.attr = {.name = "stat", .mode = S_IRUGO },
 	.show	= disk_stats_read
 };
+static struct disk_attribute disk_attr_fp = {
+	.attr = {.name = "fp", .mode = S_IRUGO },
+	.show	= disk_fp_read
+};
 
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 
@@ -513,6 +531,7 @@ static struct attribute * default_attrs[
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 	&disk_attr_fail.attr,
 #endif
+	&disk_attr_fp.attr,
 	NULL,
 };
 
@@ -745,6 +764,10 @@ struct gendisk *alloc_disk_node(int mino
 		INIT_WORK(&disk->async_notify,
 			media_change_notify_thread);
 	}
+
+	disk->fp_ss = kmalloc(sizeof(struct fp_snapshot), GFP_KERNEL);
+	memset(disk->fp_ss, 0, sizeof(struct fp_snapshot));
+
 	return disk;
 }
 
block/Kconfig +6 -0
Index: linux-2.6.23/block/Kconfig
===================================================================
@@ -65,3 +65,9 @@ config BLK_DEV_BSG
 endif # BLOCK
 
 source block/Kconfig.iosched
+
+config FINGERPRINTING
+       bool "I/O Workload Fingerprinting"
+       help
+         Say Y here if you want workload data to be classified and
+         used to tune the I/O schedulers.  Otherwise say N.
\ No newline at end of file
block/Makefile +3 -0
Index: linux-2.6.23/block/Makefile
===================================================================
@@ -11,3 +11,6 @@ obj-$(CONFIG_IOSCHED_DEADLINE)	+= deadli
 obj-$(CONFIG_IOSCHED_CFQ)	+= cfq-iosched.o
 
 obj-$(CONFIG_BLK_DEV_IO_TRACE)	+= blktrace.o
+
+
+obj-$(CONFIG_FINGERPRINTING)	+= fingerprinting.o

Subject: [patch] [patch] implement smarter atime updates support
From: Ingo Molnar <[email protected]>

change relatime updates to be performed once per day. This makes relatime a compatible solution for HSM, mailer-notification and tmpwatch applications too.

also add the CONFIG_DEFAULT_RELATIME kernel option, which makes "norelatime" the default for all mounts without an extra kernel boot option.

add the "default_relatime=0" boot option to turn this off.

also add the /proc/sys/fs/default_relatime flag which can be changed runtime to modify the behavior of subsequent new mounts.

tested by moving the date forward:

   # date
   Sun Aug  5 22:55:14 CEST 2007
   # date -s "Tue Aug  7 22:55:14 CEST 2007"
   Tue Aug  7 22:55:14 CEST 2007

access to a file did not generate disk IO before the date was set, and it generated exactly one IO after the date was set.

---
 Documentation/kernel-parameters.txt |    8 +++++
 fs/Kconfig                          |   22 ++++++++++++++
 fs/inode.c                          |   53 +++++++++++++++++++++++++++---------
 fs/namespace.c                      |   24 ++++++++++++++++
 include/linux/mount.h               |    3 ++
 kernel/sysctl.c                     |   17 +++++++++++
 6 files changed, 114 insertions(+), 13 deletions(-)
Documentation/kernel-parameters.txt +8 -0
Index: linux/Documentation/kernel-parameters.txt
===================================================================
@@ -525,6 +525,10 @@ and is between 256 and 4096 characters. 
 			This is a 16-member array composed of values
 			ranging from 0-255.
 
+	default_relatime=
+			[FS] mount all filesystems with relative atime
+			updates by default.
+
 	default_utf8=   [VT]
 			Format=<0|1>
 			Set system-wide default UTF-8 mode for all tty's.
@@ -1468,6 +1472,10 @@ and is between 256 and 4096 characters. 
 			Format: <reboot_mode>[,<reboot_mode2>[,...]]
 			See arch/*/kernel/reboot.c or arch/*/kernel/process.c			
 
+	relatime_interval=
+			[FS] relative atime update frequency, in seconds.
+			(default: 1 day: 86400 seconds)
+
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
 	reservetop=	[X86-32]
fs/Kconfig +22 -0
Index: linux/fs/Kconfig
===================================================================
@@ -2060,6 +2060,28 @@ config 9P_FS
 
 endmenu
 
+config DEFAULT_RELATIME
+	bool "Mount all filesystems with relatime by default"
+	default y
+	help
+	  If you say Y here, all your filesystems will be mounted
+	  with the "relatime" mount option. This eliminates many atime
+	  ('file last accessed' timestamp) updates (which otherwise
+	  is performed on every file access and generates a write
+	  IO to the inode) and thus speeds up IO. Atime is still updated,
+	  but only once per day.
+
+	  The mtime ('file last modified') and ctime ('file created')
+	  timestamp are unaffected by this change.
+
+	  Use the "norelatime" kernel boot option to turn off this
+	  feature.
+
+config DEFAULT_RELATIME_VAL
+	int
+	default "1" if DEFAULT_RELATIME
+	default "0"
+
 if BLOCK
 menu "Partition Types"
 
fs/inode.c +40 -13

68 lines not on this page · raw message

fs/namespace.c +24 -0
Index: linux/fs/namespace.c
===================================================================
@@ -1107,6 +1107,7 @@ int do_add_mount(struct vfsmount *newmnt
 		goto unlock;
 
 	newmnt->mnt_flags = mnt_flags;
+
 	if ((err = graft_tree(newmnt, nd)))
 		goto unlock;
 
@@ -1362,6 +1363,24 @@ int copy_mount_options(const void __user
 }
 
 /*
+ * Allow users to disable (or enable) atime updates via a .config
+ * option or via the boot line, or via /proc/sys/fs/default_relatime:
+ */
+int default_relatime __read_mostly = CONFIG_DEFAULT_RELATIME_VAL;
+
+static int __init set_default_relatime(char *str)
+{
+	get_option(&str, &default_relatime);
+
+	printk(KERN_INFO "Mount all filesystems with"
+		"default relative atime updates: %s.\n",
+		default_relatime ? "enabled" : "disabled");
+
+	return 1;
+}
+__setup("default_relatime=", set_default_relatime);
+
+/*
  * Flags is a 32-bit value that allows up to 31 non-fs dependent flags to
  * be given to the mount() call (ie: read-only, no-dev, no-suid etc).
  *
@@ -1409,6 +1428,11 @@ long do_mount(char *dev_name, char *dir_
 		mnt_flags |= MNT_NODIRATIME;
 	if (flags & MS_RELATIME)
 		mnt_flags |= MNT_RELATIME;
+	else if (default_relatime &&
+				!(flags & (MNT_NOATIME | MNT_NODIRATIME))) {
+		mnt_flags |= MNT_RELATIME;
+		flags |= MS_RELATIME;
+	}
 
 	flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE |
 		   MS_NOATIME | MS_NODIRATIME | MS_RELATIME);
include/linux/mount.h +3 -0
Index: linux/include/linux/mount.h
===================================================================
@@ -103,5 +103,8 @@ extern void shrink_submounts(struct vfsm
 extern spinlock_t vfsmount_lock;
 extern dev_t name_to_dev_t(char *name);
 
+extern int default_relatime;
+extern int relatime_interval;
+
 #endif
 #endif /* _LINUX_MOUNT_H */
kernel/sysctl.c +17 -0
Index: linux/kernel/sysctl.c
===================================================================
@@ -30,6 +30,7 @@
 #include <linux/capability.h>
 #include <linux/smp_lock.h>
 #include <linux/fs.h>
+#include <linux/mount.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/kobject.h>
@@ -1206,6 +1207,22 @@ static ctl_table fs_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "default_relatime",
+		.data		= &default_relatime,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "relatime_interval",
+		.data		= &relatime_interval,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

---
 arch/i386/kernel/ioport.c   |   17 ++++++++++++++---
 arch/x86_64/kernel/ioport.c |   12 ++++++++++--
 drivers/block/loop.c        |    5 ++++-
 include/linux/sched.h       |    7 +++++++
 kernel/Kconfig.preempt      |   17 +++++++++++++++++
 kernel/sched.c              |   40 ++++++++++++++++++++++++++++++++++++++++
 kernel/workqueue.c          |    2 +-
 mm/oom_kill.c               |    4 +++-
 8 files changed, 96 insertions(+), 8 deletions(-)
arch/i386/kernel/ioport.c +14 -3
Index: linux/arch/i386/kernel/ioport.c
===================================================================

Lines of this file are not shown. View the raw message.

arch/x86_64/kernel/ioport.c +10 -2
Index: linux/arch/x86_64/kernel/ioport.c
===================================================================

Lines of this file are not shown. View the raw message.

drivers/block/loop.c +0 -0
Index: linux/drivers/block/loop.c
===================================================================

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

	set_user_nice(current, -20);

+
+ /*
+ * The loop thread is important enough to be given a boost:
+ */
+ sched_privileged_task(current);

while (!kthread_should_stop() || lo->lo_bio) {

include/linux/sched.h +7 -0
Index: linux/include/linux/sched.h
===================================================================

Lines of this file are not shown. View the raw message.

kernel/Kconfig.preempt +17 -0
Index: linux/kernel/Kconfig.preempt
===================================================================

Lines of this file are not shown. View the raw message.

kernel/sched.c +47 -0

47 lines not on this page · raw message

kernel/workqueue.c +1 -0
Index: linux/kernel/workqueue.c
===================================================================

Lines of this file are not shown. View the raw message.

mm/oom_kill.c +3 -1
Index: linux/mm/oom_kill.c
===================================================================

Lines of this file are not shown. View the raw message.

fs/jbd/journal.c +2 -0
Index: linux/fs/jbd/journal.c
===================================================================

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

init/Kconfig +2 -0
Index: linux-2.6.23-cfs/init/Kconfig
===================================================================

Lines of this file are not shown. View the raw message.

init/Kconfig.cfs +130 -0

130 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

+ default CUSTOM_SCHED_BATCH_WAKEUP_GRANULARITY if CUSTOM_SCHED_SETUP

kernel/sched.c +2 -1
Index: linux-2.6.23-cfs/kernel/sched.c
===================================================================

Lines of this file are not shown. View the raw message.

kernel/sched_fair.c +8 -4
Index: linux-2.6.23-cfs/kernel/sched_fair.c
===================================================================

Lines of this file are not shown. View the raw message.

kernel/sysctl.c +15 -0
Index: linux-2.6.23-cfs/kernel/sysctl.c
===================================================================

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

#3 lore raw
Quoted 6 lines · Renato S. Yamane
Quoted 2 lines

Renato, some questions:
1) is this fully reproducible with updatedb ?

Yes, this crash is fully reproducible.
All time wich I turn-on my laptopt I need kill find daemon in my Debian Etch. If I don't do that, my laptop hangs.

Good. Not for you, but for isolating the bug. :)

Quoted 6 lines
Quoted 3 lines

2) are you sure that this is the first stacktrace you captured, there might be some BUG before that which scrolled out of sight. Any chance to use a serial console?

I can't use scroll, because none key/mouse work after crash. And, sorry I can't use a serial console. Any other idea?

netconsole might work. Documentation/networking/netconsole.txt

Quoted 6 lines
Quoted 4 lines

3) Can you please recompile the kernel with CONFIF_DEBUG_INFO set and then run the following addresses from the backtrace through addr2line with the new vmlinux:

# addr2line -e vmlinux 0xc013dad9 0xc0107c3b

Yes, I try compile 2.6.24.3 without any patch.

Ok. If the problem persists, you might try 2.6.25-rc5 as well. I have timer debugging infrastructure for the latter, which I want to avoid to backport to .23/24 :)

Does it happen with straight 2.6.23.16 as well ?

Quoted 5 lines
Quoted 3 lines

4) Looking at your .config it seems you have some more patches applied aside of the .16 stable. Can you please upload a full patch queue somewhere ?

I attached all patchs used in my 2.6.23.16.

Hmm, I can't see an obvious candidate.

Thanks,

tglx