Skip to contentSkip to conversation

Fix wrong message when RFI Flush is disable

PATCH Applied Gustavo Walbon 3 participants 3 messages May 2, 2019 – Nov 14, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Fix wrong message when RFI Flush is disable

From: "Gustavo L. F. Walbon" <[email protected]>

The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows.

CPU | L1D private | RFI Flush |                   sysfs               |
----| ----------- | --------- | ------------------------------------- |
 P9 |    False    |   False   | Vulnerable
 P9 |    False    |   True    | Mitigation: RFI Flush
 P9 |    True     |   False   | Vulnerable: L1D private per thread
 P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per
    |             |           | thread
 P8 |    False    |   False   | Vulnerable
 P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:

 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: RFI Flush, L1D private per thread
 # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: L1D private per thread

Output after fix:

 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: RFI Flush, L1D private per thread
 # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Vulnerable: L1D private per thread
---
 arch/powerpc/kernel/security.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)
arch/powerpc/kernel/security.c +6 -10
index b33bafb8fcea..e08b81ef43b8 100644
@@ -130,26 +130,22 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
 
-	if (rfi_flush || thread_priv) {
+	if (rfi_flush) {
 		struct seq_buf s;
 		seq_buf_init(&s, buf, PAGE_SIZE - 1);
 
-		seq_buf_printf(&s, "Mitigation: ");
-
-		if (rfi_flush)
-			seq_buf_printf(&s, "RFI Flush");
-
-		if (rfi_flush && thread_priv)
-			seq_buf_printf(&s, ", ");
-
+		seq_buf_printf(&s, "Mitigation: RFI Flush");
 		if (thread_priv)
-			seq_buf_printf(&s, "L1D private per thread");
+			seq_buf_printf(&s, ", L1D private per thread");
 
 		seq_buf_printf(&s, "\n");
 
 		return s.len;
 	}
 
+	if (thread_priv)
+		return sprintf(buf, "Vulnerable: L1D private per thread\n");
+
 	if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
 	    !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
 		return sprintf(buf, "Not affected\n");
Signature · 1 line
2.19.1
#1 lore raw
Quoted 38 lines · Gustavo Walbon

From: "Gustavo L. F. Walbon" <[email protected]>

The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows.

CPU | L1D private | RFI Flush |                   sysfs               |
----| ----------- | --------- | ------------------------------------- |
 P9 |    False    |   False   | Vulnerable
 P9 |    False    |   True    | Mitigation: RFI Flush
 P9 |    True     |   False   | Vulnerable: L1D private per thread
 P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per
    |             |           | thread
 P8 |    False    |   False   | Vulnerable
 P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:

 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: RFI Flush, L1D private per thread
 # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: L1D private per thread

Output after fix:

 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: RFI Flush, L1D private per thread
 # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Vulnerable: L1D private per thread
Quoted 4 lines

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/4e706af3cd8e1d0503c25332b30cad33c97ed442

cheers

#2 lore raw
Quoted 41 lines · Michael Ellerman
Quoted 40 lines · Gustavo Walbon

From: "Gustavo L. F. Walbon" <[email protected]>

The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows.

CPU | L1D private | RFI Flush |                   sysfs               |
----| ----------- | --------- | ------------------------------------- |
 P9 |    False    |   False   | Vulnerable
 P9 |    False    |   True    | Mitigation: RFI Flush
 P9 |    True     |   False   | Vulnerable: L1D private per thread
 P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per
    |             |           | thread
 P8 |    False    |   False   | Vulnerable
 P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:

 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: RFI Flush, L1D private per thread
 # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: L1D private per thread

Output after fix:

 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Mitigation: RFI Flush, L1D private per thread
 # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
 # cat /sys/devices/system/cpu/vulnerabilities/meltdown
 Vulnerable: L1D private per thread
Quoted 8 lines
Quoted 2 lines

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/4e706af3cd8e1d0503c25332b30cad33c97ed442

cheers

Fixes ff348355e9c7 ("powerpc/64s: Enhance the information in

cpu_show_meltdown()")

Thanks

Michal