Skip to contentSkip to conversation

Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.

PATCH RESEND New Jerry Van Baren 2 participants 2 messages Mar 19, 2008 – Mar 25, 2008

lore
Share & tools
lore

Jerry Van Baren

author
#0 lore raw

PATCH RESEND 2/2 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.

Signed-off-by Gerald Van Baren <[email protected]>

---

Hi Kim,

This is useful if/when Stefan Roese applies the previous patch "Flash programming progress countdown."

Best regards,
gvb

  include/configs/MPC8360EMDS.h |    1 +
  1 files changed, 1 insertions(+), 0 deletions(-)
include/configs/MPC8360EMDS.h +1 -0
index eff9fba..82860ba 100644
@@ -194,6 +194,7 @@
  #define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
  #define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
  #define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
  #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash

base */
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */

Signature · 11 lines
1.5.4.1


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Applied
#1 lore raw

PATCH RESEND 2/2 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.

Quoted 5 lines · On Tue, 18 Mar 2008 21:44:41 -0400 Jerry Van Baren <[email protected]> wrote:
Signed-off-by Gerald Van Baren <[email protected]>

---

Hi Kim,

Quoted 8 lines

This is useful if/when Stefan Roese applies the previous patch "Flash programming progress countdown."

Best regards,
gvb

  include/configs/MPC8360EMDS.h |    1 +
  1 files changed, 1 insertions(+), 0 deletions(-)

applied.

Kim