sh: Add support for Solution Engine SH7721 board
PATCH v2 1/1 sh: Add support for Solution Engine SH7721 board
Add support for Solution Engine SH7721 board(MS7721RP01).
Signed-off-by Yoshihiro Shimoda <[email protected]>
--- arch/sh/Kconfig | 8 arch/sh/Makefile | 1 arch/sh/boards/se/7721/Makefile | 1 arch/sh/boards/se/7721/irq.c | 45 + arch/sh/boards/se/7721/setup.c | 99 ++ arch/sh/configs/se7721_defconfig | 1085 +++++++++++++++++++++++++++++ arch/sh/kernel/cf-enabler.c | 9 arch/sh/tools/mach-types | 1 include/asm-sh/se7721.h | 70 + 9 files changed, 1316 insertions(+), 3 deletions(-)
arch/sh/boards/se/7721/irq.c +45 -0
@@ -0,0 +1,45 @@ +/* +* linux/arch/sh/boards/se/7721/irq.c +* +* Copyright (C) 2008 Renesas Solutions Corp. +* +* This file is subject to the terms and conditions of the GNU General Public +* License. See the file "COPYING" in the main directory of this archive +* for more details. +*/ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <asm/se7721.h> + +enum { +UNUSED =0 , + +/* board specific interrupt sources */ +MRSHPC , +}; + +static struct intc_vect vectors[]__initdata = { +INTC_IRQ (MRSHPC ,MRSHPC_IRQ0 ), +}; + +static struct intc_prio_reg prio_registers[]__initdata = { + {FPGA_ILSR6 ,0 ,8 ,4 ,/* IRLMSK */ + {0 ,MRSHPC } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors, + NULL, NULL, prio_registers, NULL); + +/* +* Initialize IRQ setting +*/ +void __init init_se7721_IRQ (void ) +{ +/* PPCR */ +ctrl_outw (ctrl_inw (0xa4050118 ) & ~0x00ff ,0xa4050118 ); + +register_intc_controller (&intc_desc); +intc_set_priority (MRSHPC_IRQ0 ,0xf -MRSHPC_IRQ0 ); +}
arch/sh/boards/se/7721/Makefile +1 -0
@@ -0,0 +1 @@ +obj-y := setup.o irq.o
arch/sh/boards/se/7721/setup.c +99 -0
99 lines not on this page · raw message
arch/sh/configs/se7721_defconfig +1085 -0
1,085 lines not on this page · raw message
arch/sh/Kconfig +8 -0
@@ -375,6 +375,14 @@ config SH_7619_SOLUTION_ENGINE Select 7619 SolutionEngine if configuring for a Hitachi SH7619 evaluation board. +config SH_7721_SOLUTION_ENGINE + bool "SolutionEngine7721" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7721 + help + Select 7721 SolutionEngine if configuring for a Hitachi SH7721 + evaluation board. + config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE
arch/sh/kernel/cf-enabler.c +6 -3
@@ -83,6 +83,8 @@ static int __init cf_init_default(void)#include <asm/se.h> #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE )#include <asm/se7722.h> +#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE ) +#include <asm/se7721.h> #endif /*
@@ -99,7 +101,9 @@ static int __init cf_init_default(void)* 0xB0600000 : I/O */ -#if defined(CONFIG_SH_SOLUTION_ENGINE ) || defined(CONFIG_SH_7722_SOLUTION_ENGINE ) +#if defined(CONFIG_SH_SOLUTION_ENGINE ) || \ + defined(CONFIG_SH_7722_SOLUTION_ENGINE ) || \ + defined(CONFIG_SH_7721_SOLUTION_ENGINE )static int __init cf_init_se (void ) {if ((ctrl_inw (MRSHPC_CSR ) &0x000c ) !=0 )
@@ -155,9 +159,8 @@ static int __init cf_init_se(void)int __init cf_init (void ) { -if (mach_is_se () ||mach_is_7722se () ){ +if (mach_is_se () ||mach_is_7722se () ||mach_is_7721se ())return cf_init_se (); - }return cf_init_default (); }
arch/sh/Makefile +1 -0
@@ -107,6 +107,7 @@ machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 +machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 machdir-$(CONFIG_SH_HP6XX) += hp6xx machdir-$(CONFIG_SH_DREAMCAST) += dreamcast machdir-$(CONFIG_SH_MPC1211) += mpc1211
arch/sh/tools/mach-types +1 -0
@@ -21,6 +21,7 @@ HD64465 HD64465 7206SE SH_7206_SOLUTION_ENGINE 7343SE SH_7343_SOLUTION_ENGINE 7619SE SH_7619_SOLUTION_ENGINE +7721SE SH_7721_SOLUTION_ENGINE 7722SE SH_7722_SOLUTION_ENGINE 7751SE SH_7751_SOLUTION_ENGINE 7780SE SH_7780_SOLUTION_ENGINE
include/asm-sh/se7721.h +70 -0
70 lines not on this page · raw message
Paul Mundt
AppliedQuoted 3 lines · Yoshihiro Shimoda
Add support for Solution Engine SH7721 board(MS7721RP01).
Signed-off-by Yoshihiro Shimoda <[email protected]>
Applied, thanks.