Skip to contentSkip to conversation

nfs-utils-1.1.2 released.

DISCUSSION Steve Dickson 1 participant 1 message Mar 24, 2008

Subsystems (2)
lore
Share & tools
lore

Steve Dickson

author Reviewed-by Greg Banks
#0 lore raw

Although it took a bit longer than expect, mainly do to logistical reasons, the nfs-utils-1.1.2 maintenance release is done. Its a available in all the usual places:

Git tree:    git://linux-nfs.org/nfs-utils
Tar ball:    http://www.kernel.org/pub/linux/utils/nfs/
SourceForge: http://sourceforge.net/projects/nfs

The release contains the following commits:
(Note there were a few patch submissions that did not make this release but they are queued for the next release. Please check the git tree for recent commits)

commit d1e7ccccd9153d8cab1701a6396921ff7e57dd03

Author: Timo Aaltonen <[email protected]>
Date:   Thu Mar 13 13:02:32 2008 -0400

Turn down gssd's syslog verbosity

commit eed0765ee5a4b578d57672e22665b63db526b971

Author: Steinar H. Gunderson <sgunderson-jG/[email protected]>
Date:   Thu Mar 13 11:30:18 2008 -0400

Stop rpc.mountd from probing all known devices which causes idle disks to spin up for basically no reason.

commit ab26cd622e1a5ef22be2df1f3176158b1505df30

Author: Chuck Lever <[email protected]>
Date:   Tue Mar 11 13:11:50 2008 -0400

Recently #include directives for autoconf's config.h file were added in utils/mount/error.c and utils/mount/mount.c, but appropriate HAVE_CONFIG_H checks were not added at the same time.

In addition, several other .c files under utils/mount reference autoconf-generated HAVE_ macros, but don't appear to include config.h

Also, Heinz-Ado Arnolds <[email protected]> reports that this patch is needed to ensure START_STATD
is properly defined in utils/mount/network.c. Otherwise
start_statd() is always a no-op, even if the configure
script defines an appropriate statd start-up script.

commit 9c1e19f1c6ba13e08c51c21db6f21ef1e203b37c

Author: Filipus Klutiero <[email protected]>
Date:   Tue Mar 11 12:52:26 2008 -0400

Fixed typo in nfsd man page

bz: http://bugzilla.linux-nfs.org/show_bug.cgi?id=160

commit bd04ddfc123625980e288dbef455e1170310b29a

Author: Steinar H. Gunderson <sgunderson-jG/[email protected]>
Date:   Mon Mar 10 15:20:36 2008 -0400

Fixed a segfault in the mount.nfs command

commit b587496ba83ac7da31a33a0e1fd533773f3240ce

Author: Steinar H. Gunderson <sgunderson-jG/[email protected]>
Date:   Mon Mar 10 14:55:47 2008 -0400

Fixed a couple typos that effected the '--mounts' nfsstat option

commit 0a4a2cba3a4f479c51f45fd66d761ffa4593e9e4

Author: Steinar H. Gunderson <sgunderson-jG/[email protected]>
Date:   Mon Mar 10 14:51:31 2008 -0400

Fixed typo in gssd manpage

commit 00511ee5c97793fa8bf3f463ac07cbb4029ca149

Author: Steinar H. Gunderson <sgunderson-jG/[email protected]>
Date:   Mon Mar 10 14:49:31 2008 -0400

The mount(5) man page states that the noquota, quota, usrquota and grpquota options are ignored. (They are, however, used by the quota tools, so having them in fstab can be useful.) Make mount.nfs ignore them properly, matching the man page. There are a few aliases (like usrjquota) that are parsed by quota, but as these are not documented nor seem to be widely used, they are not included.

commit 8c947a43b6eb4ae1ab0c034e6ba6e8ec035b3505

Author: Steve Dickson <[email protected]>
Date:   Mon Mar 10 14:42:21 2008 -0400

Be explicit on how to update exports in the man page.

commit c4276d4353dc8dd26cc58ccbf4bf899999b84a57

Author: Chuck Lever <[email protected]>
Date:   Wed Mar 5 10:07:11 2008 -0500

As part of migrating from nfs-TtF/[email protected] to [email protected], update the mailing list
address used to report bugs in nfs-utils.

Removed the BUGS section in the mount.nfs and umount.nfs man pages since they weren't consistent with the contents of the BUGS sections in others in nfs-utils.

commit f24884196dac4cffc3ae79cf87cf51d892cda46c

Author: Neil Brown <[email protected]>
Date:   Tue Mar 4 09:39:31 2008 -0500

Stop the kernel export table from being flushed on MIPS machines.

commit d15fa02fe38f6f1c9183540810ac7bfeac0c7c17

Author: Drew Middlesworth <[email protected]>
Date:   Tue Mar 4 09:27:57 2008 -0500

Increase the number of concurrent krb5 mounts by increasing the size of the poll array

commit bcd0fcaf0966c546da5043be700587f73174ae25

Author: NeilBrown <[email protected]>
Date:   Tue Feb 26 13:57:39 2008 -0500

If validateascii is passed a string containing only non-zero 7bit values, then the loop with exit with i == len, and the following test will access beyond the end of the array.

So add an extra test to fix this.

Found by Marcus Meissner <[email protected]>.

commit acf95d32a44fd8357c24e8a04ec53fc6900bfc58

Author: Peng Haitao <[email protected]>
Date:   Tue Feb 26 13:52:18 2008 -0500

Fixed typo in the nfsstat command line arugments.

commit 46d439b17f22216ce8f9257a982c6ade5d1c5931

Author: Vince Busam <[email protected]>
Date:   Tue Feb 26 13:04:52 2008 -0500

Stop gssd from ignoring the machine credential cache defined by the -d flag

commit 9dd9b68c4c44f0d9102eb85ee2fa36a8b7f638e3

Author: Harshula Jayasuriya <[email protected]>
Date:   Tue Feb 12 16:13:25 2008 -0500

In mountd, if get_exportlist() (utils/mountd/mountd.c) returns NULL it should not be considered a failure. It just means that there are no exports on the system.

The practical problem with the current code is that a showmount -e results in a syslog message from mountd that looks like:

rpc.mountd: export request from 10.250.100.2 failed.

commit 7a817c45eaeb6aa93fdb5ca4d81c363b4e4218f0

Author: Frank Filz <[email protected]>
Date:   Sat Feb 9 07:48:48 2008 -0500

Cleaned up some typos that were found in the various places in the mountd code.

commit b5651e42cedc2b91aba87ea30520884d7f43b36f

Author: Steve Dickson <[email protected]>
Date:   Thu Jan 24 17:02:08 2008 -0500

Added in relatime mount option so mount.nfs stays compatible with the mount command in util-linux-ng

commit 2d77e3a27b7b211f303fcc3a813a044838dad970

Author: Steve Dickson <[email protected]>
Date:   Sat Jan 19 07:59:26 2008 -0500

Fix bug when both crossmnt and fsid are set.

When exported a filesystems with option inherited (by the crossmnt option) from a higherlevel filesystem, ignore filesystem specific options like FSID and explicit UUID.

commit 399cc3dad0cdfe8dca4a0ae9035a0554d7223eb2

Author: Steve Dickson <[email protected]>
Date:   Thu Jan 17 11:25:37 2008 -0500

Stop segfaults on amd64 during warnings messages by creating a second va_list in xlog_backend() and then use that va_list to print messages on stderr.

commit 72ada109b86622db8009e774ebc96a7a92094e8a

Author: Steve Dickson <[email protected]>
Date:   Wed Jan 16 12:01:13 2008 -0500

The kernel doesn't support the underlying parts needed for changing the MNT program number.

commit 72bc295da78bafff92762b8afbb298ac16d1ff43

Author: Steve Dickson <[email protected]>
Date:   Wed Jan 16 12:00:32 2008 -0500

The kernel hasn't supported the underlying parts needed for changing the NFS program number for a very long time.

commit abb00ff7cff3c6540978d9b463dee3d4fdda15f4

Author: Steve Dickson <[email protected]>
Date:   Wed Jan 16 11:53:41 2008 -0500

Address an inconsistency: the mount.nfs command uses the glibc routines to manipulate /etc/mtab (setmntent) but, everything else in nfs-utils uses a local private version (nfs_setmntent). The local version does some extra mangling of the mtab entries.

We should check what util-linux does these days to be sure, but for now, let's make the mount.nfs command use the nfs_ variants of setmntent().

commit fa087f2dece4b1d322d951e9353e8ab93208194d

Author: Steve Dickson <[email protected]>
Date:   Wed Jan 16 11:50:41 2008 -0500

add_mtab() calls unlock_mtab() twice in one of its error exit paths.

commit 0f3172012919d36e2a7e5bf46c388f8c028fc93e

Author: Steve Dickson <[email protected]>
Date:   Wed Jan 16 11:48:23 2008 -0500

When mount.nfs reports that statd isn't running, it suggests using the "-o nolocks" option, which doesn't exist. It should say "-o nolock".

commit ec637de16210c1c6fcb3a0df34d7889592f577dc

Author: Steve Dickson <[email protected]>
Date:   Wed Jan 9 13:13:31 2008 -0500

Automatically set 'nohide' on referral exports.

commit 5c4f17a97b1260e9c564ddd9887afaf50a26de9d

Author: Steve Dickson <[email protected]>
Date:   Wed Jan 9 11:51:41 2008 -0500

Redress some nits in the description of the timeo option in the nfs(5) man page.

commit 7c6a4ae0aff5c2cd5fde2909e8af886ccf0bd27d

Author: Steve Dickson <[email protected]>
Date:   Mon Jan 7 10:39:37 2008 -0500

Fixed typo in rpc.mountd's man page

commit 46704243eb10718c722607cc7f66703e3eb3ac9c

Author: Steve Dickson <[email protected]>
Date:   Fri Jan 4 10:26:21 2008 -0500

Get rid of the "-i" option for mount.nfs[4] and always use the text-based mount(2) system call for kernel version 2.6.23 and later.

commit ca43d9d8c7bdbd067fb1fb4fa9d6e055f4d34ce5

Author: Steve Dickson <[email protected]>
Date:   Fri Jan 4 09:27:35 2008 -0500

Incorporated Chuck Lever's and Don Domingo's changes to the nfs(5) manual page.

commit bfdc26916d8dabd319240a3ce5198b6189040be7

Author: Steve Dickson <[email protected]>
Date:   Sat Nov 3 10:40:36 2007 -0400

When mountd gets a request to export a mountpoint which is not explicitly exported, but is below an export point that is flagged as "crossmnt", it passes the wrong path name to the kernel for the "filehandle -> directory" mapping.

This can badly confuse the NFS client, and is certainly wrong. So use the correct path names.

commit 812a43c1e4e055ee684ab95b28b41f0c16cc52fd

Author: Steve Dickson <[email protected]>
Date:   Sat Nov 3 10:36:36 2007 -0400

When following a list of mount versions to probe - e.g. probe_mnt1_first or probe_mnt3_first - probe_both will first probe the appropriate NFS version and then, if that succeeds, probe the actual mount version. However instead of probing the target mount version, it probes the "most appropriate" mount version for the given NFS version. This results in it probing:
NFSv2, MOUNTv1
twice rather than
NFSv2, MOUNTv1
NFSv2, MOUNTv2

as would be more correct.

This patch removes the "choose most correct" step and just use the current mouint version for the probe_vers array.

commit d4b159620b26dce8f83d41358d618ccc82fa82d4

Author: Steve Dickson <[email protected]>
Date:   Sat Nov 3 09:35:05 2007 -0400

This means that if mountd is run with "--no-nfs-version 3", It will first probe for NFS version 3, which will succeed (assuming the kernel supported NFSv3), then it will check the matching mountd version (3) and probe_port on discovering that isn't supported will try other versions, find "1" is supported will succeed.

This leaves up using mount version 1 for an NFSv3 mount, which doesn't work and leads to a SIGSEGV

There is no case where trying other versions is needed the request one is not supported, so simply remove that code.

commit efbda485ff5b3d5916971e1af656d2c21307af30

Author: Steve Dickson <[email protected]>
Date:   Sat Nov 3 09:14:57 2007 -0400

The wording in the exportfs man page can be a bit confusing, implying that "exportfs -u :/foo" will unexport /foo from all hosts, which it won't.

This patch cleans that wording up and adds a couple examples on how to unexport directories

commit b1e64b99a97b27d850d7a615b291aa9aeb2972ab

Author: Steve Dickson <[email protected]>
Date:   Fri Oct 26 07:57:10 2007 -0400

Added -S/--since to the nfsstat(1) manpage

Author: David Richter <[email protected]>