Add CONFIG_MII_INIT support to related boards
PATCH 1/1 Add CONFIG_MII_INIT support to related boards
From: TsiChung Liew <[email protected]>
Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in cmd_init.c. Add CONFIG_MII_INIT to board configuration files that use mii_init() in cmd_init.c.
--- board/fads/fads.h | 1 + common/cmd_mii.c | 2 +- include/configs/Adder.h | 1 + include/configs/EB+MCF-EV123.h | 1 + include/configs/EP88x.h | 1 + include/configs/GEN860T.h | 1 + include/configs/M5235EVB.h | 1 + include/configs/M5271EVB.h | 1 + include/configs/M5275EVB.h | 1 + include/configs/M5282EVB.h | 1 + include/configs/M5329EVB.h | 1 + include/configs/M5373EVB.h | 1 + include/configs/M54455EVB.h | 4 ++-- include/configs/M5475EVB.h | 1 + include/configs/M5485EVB.h | 1 + include/configs/NETPHONE.h | 1 + include/configs/NETTA.h | 1 + include/configs/NETTA2.h | 1 + include/configs/TK885D.h | 2 ++ include/configs/TOP860.h | 1 + include/configs/TQM885D.h | 1 + include/configs/cobra5272.h | 1 + include/configs/idmr.h | 3 ++- include/configs/spc1920.h | 1 + include/configs/stxxtc.h | 1 + include/configs/uc100.h | 1 + 26 files changed, 29 insertions(+), 4 deletions(-)
board/fads/fads.h +1 -0
@@ -96,6 +96,7 @@#ifdef CONFIG_FEC_ENET #define CFG_DISCOVER_PHY +#define CONFIG_MII_INIT 1#endif
common/cmd_mii.c +1 -1
@@ -306,7 +306,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])return 1 ; } -#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x) || defined(CONFIG_MII_INIT ) +#if defined(CONFIG_MII_INIT )mii_init ();#endif
include/configs/Adder.h +1 -0
@@ -42,6 +42,7 @@#if defined(CONFIG_ETHER_ON_FEC1 ) || defined(CONFIG_ETHER_ON_FEC2 )#define CFG_DISCOVER_PHY +#define CONFIG_MII_INIT 1#define FEC_ENET #endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */
include/configs/EB+MCF-EV123.h +1 -0
@@ -88,6 +88,7 @@#ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/EP88x.h +1 -0
@@ -42,6 +42,7 @@#define CONFIG_ETHER_ON_FEC2 /* Enable Ethernet on FEC2 */ #if defined(CONFIG_ETHER_ON_FEC1 ) || defined(CONFIG_ETHER_ON_FEC2 )#define CFG_DISCOVER_PHY +#define CONFIG_MII_INIT 1#define FEC_ENET #endif /* CONFIG_FEC_ENET */
include/configs/GEN860T.h +1 -0
@@ -147,6 +147,7 @@#define CONFIG_FEC_ENET #define CFG_DISCOVER_PHY #define CONFIG_MII +#define CONFIG_MII_INIT 1#define CONFIG_PHY_ADDR 0/*
include/configs/M5235EVB.h +1 -0
@@ -77,6 +77,7 @@#ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/M5271EVB.h +1 -0
@@ -88,6 +88,7 @@#ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/M5275EVB.h +1 -0
@@ -89,6 +89,7 @@#ifdef CONFIG_MCFFEC #define CONFIG_NET_MULTI 1#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1#define CFG_DISCOVER_PHY #define CFG_RX_ETH_BUFFER 8#define CFG_FAULT_ECHO_LINK_DOWN
include/configs/M5282EVB.h +1 -0
@@ -75,6 +75,7 @@#ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/M5329EVB.h +1 -0
@@ -70,6 +70,7 @@#ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/M5373EVB.h +1 -0
@@ -70,6 +70,7 @@#ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/M54455EVB.h +2 -2
@@ -83,9 +83,9 @@/* Network configuration */ #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC -# define CONFIG_NET_MULTI 1 +# define CONFIG_NET_MULTI 1# define CONFIG_MII 1 -# define CONFIG_CF_DOMII +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/M5475EVB.h +1 -0
@@ -69,6 +69,7 @@#ifdef CONFIG_FSLDMAFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CONFIG_HAS_ETH1 # define CFG_DISCOVER_PHY
include/configs/M5485EVB.h +1 -0
@@ -69,6 +69,7 @@#ifdef CONFIG_FSLDMAFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CONFIG_HAS_ETH1 # define CFG_DISCOVER_PHY
include/configs/NETPHONE.h +1 -0
@@ -101,6 +101,7 @@#define FEC_ENET 1/* eth.c needs it that way... */ #undef CFG_DISCOVER_PHY#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1#define CONFIG_RMII 1/* use RMII interface */ #define CONFIG_ETHER_ON_FEC1 1
include/configs/NETTA.h +1 -0
@@ -97,6 +97,7 @@#define FEC_ENET 1/* eth.c needs it that way... */ #undef CFG_DISCOVER_PHY/* do not discover phys */ #define CONFIG_MII 1 +#define CONFIG_MII_INIT 1#define CONFIG_RMII 1/* use RMII interface */ #if defined(CONFIG_NETTA_ISDN )
include/configs/NETTA2.h +1 -0
@@ -102,6 +102,7 @@#define FEC_ENET 1/* eth.c needs it that way... */ #undef CFG_DISCOVER_PHY#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1#define CONFIG_RMII 1/* use RMII interface */ #define CONFIG_ETHER_ON_FEC1 1
include/configs/TK885D.h +2 -0
@@ -510,6 +510,8 @@#define CONFIG_FEC2_PHY 2#endif +#define CONFIG_MII_INIT 1 +#define CONFIG_NET_RETRY_COUNT 3#define CONFIG_ETHPRIME "FEC ETHERNET"
include/configs/TOP860.h +1 -0
@@ -205,6 +205,7 @@#define FEC_ENET 1/* eth.c needs it that way... */ #define CFG_DISCOVER_PHY 1#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1#define CONFIG_PHY_ADDR 31/*-----------------------------------------------------------------------
include/configs/TQM885D.h +1 -0
@@ -497,6 +497,7 @@#if defined(CONFIG_CMD_MII )#define CFG_DISCOVER_PHY +#define CONFIG_MII_INIT 1#endif #define CONFIG_NET_RETRY_COUNT 1/* reduce max. timeout before
include/configs/cobra5272.h +1 -0
@@ -158,6 +158,7 @@#ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/idmr.h +2 -1
@@ -156,7 +156,8 @@#define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1 -#define CONFIG_MII 1 +# define CONFIG_MII 1 +# define CONFIG_MII_INIT 1# define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8# define CFG_FAULT_ECHO_LINK_DOWN
include/configs/spc1920.h +1 -0
@@ -31,6 +31,7 @@#undef CONFIG_8xx_CONS_NONE#define CONFIG_MII +#define CONFIG_MII_INIT 1#undef CONFIG_ETHER_ON_FEC1#define CONFIG_ETHER_ON_FEC2 #define FEC_ENET
include/configs/stxxtc.h +1 -0
@@ -97,6 +97,7 @@#define FEC_ENET 1/* eth.c needs it that way... */ #undef CFG_DISCOVER_PHY#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1#undef CONFIG_RMII#define CONFIG_ETHER_ON_FEC1 1
include/configs/uc100.h +1 -0
@@ -510,6 +510,7 @@#define CONFIG_FEC_ENET 1/* use FEC ethernet */ #define FEC_ENET #define CONFIG_MII +#define CONFIG_MII_INIT 1#define CFG_DISCOVER_PHY 1#endif /* __CONFIG_H */
Signature · 1 line
1.5.4.1
PATCH 1/1 Add CONFIG_MII_INIT support to related boards
Quoted 8 lines · Tsi-Chung Liew
From: TsiChung Liew <[email protected]>
Replace
CONFIG_8xxandCONFIG_MCF532xtoCONFIG_MII_INITincmd_init.c. AddCONFIG_MII_INITto board configuration files that usemii_init()incmd_init.c.Signed-off-by TsiChung Liew <[email protected]>
Quoted 2 lines
---
Wolfgang - This patch depends on code that is in the net tree, but I can't pull it in because it contains files that the net tree doesn't know about.
regards,
Ben
Wolfgang Denk
AppliedPATCH 1/1 Add CONFIG_MII_INIT support to related boards
In reply to Tsi-Chung LiewQuoted 27 lines · In message <[email protected]>…
From: TsiChung Liew <[email protected]>
Replace
CONFIG_8xxandCONFIG_MCF532xtoCONFIG_MII_INITincmd_init.c. AddCONFIG_MII_INITto board configuration files that usemii_init()incmd_init.c.Signed-off-by TsiChung Liew <[email protected]>--- board/fads/fads.h | 1 + common/cmd_mii.c | 2 +- include/configs/Adder.h | 1 + include/configs/EB+MCF-EV123.h | 1 + include/configs/EP88x.h | 1 + include/configs/GEN860T.h | 1 + include/configs/M5235EVB.h | 1 + include/configs/M5271EVB.h | 1 + include/configs/M5275EVB.h | 1 + include/configs/M5282EVB.h | 1 + include/configs/M5329EVB.h | 1 + include/configs/M5373EVB.h | 1 + include/configs/M54455EVB.h | 4 ++-- include/configs/M5475EVB.h | 1 + include/configs/M5485EVB.h | 1 + include/configs/NETPHONE.h | 1 + include/configs/NETTA.h | 1 + include/configs/NETTA2.h | 1 + include/configs/TK885D.h | 2 ++
Quoted 8 lines
include/configs/TOP860.h | 1 + include/configs/TQM885D.h | 1 + include/configs/cobra5272.h | 1 + include/configs/idmr.h | 3 ++- include/configs/spc1920.h | 1 + include/configs/stxxtc.h | 1 + include/configs/uc100.h | 1 + 26 files changed, 29 insertions(+), 4 deletions(-)
Applied, thanks.
Viele Gr??e,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is dangerous to be right on a subject on which the established authorities are wrong. -- Voltaire