Skip to contentSkip to conversation

Using FEC on a MPC5200 with default PHY configuration

DISCUSSION Wolfgang Grandegger 2 participants 4 messages Mar 31, 2008 – Apr 1, 2008

lore
Share & tools
lore
#0 lore raw

Hello,

is it possible to use the FEC on a MPC5200 with the default hardware PHY configuration. I mean running the link with a default speed without handling or even touching the PHY like U-Boot does. I removed the PHY entries from the DTS file and disabled CONFIG_FEC_MPC52xx_MDIO but it did not work.

Any help is appreciated, TIA.

Wolfgang.

#1 lore raw
Quoted 7 lines · Wolfgang Grandegger

Hello,

is it possible to use the FEC on a MPC5200 with the default hardware PHY configuration. I mean running the link with a default speed without handling or even touching the PHY like U-Boot does. I removed the PHY entries from the DTS file and disabled CONFIG_FEC_MPC52xx_MDIO but it did not work.

To be more precise, I want to support a 3-Port managed switch with PHY from Micrel using the direct switch link.

TIA.

Wolfgang.

#2 lore raw
Quoted 11 lines · Wolfgang Grandegger
Quoted 7 lines · Wolfgang Grandegger

Hello,

is it possible to use the FEC on a MPC5200 with the default hardware PHY configuration. I mean running the link with a default speed without handling or even touching the PHY like U-Boot does. I removed the PHY entries from the DTS file and disabled CONFIG_FEC_MPC52xx_MDIO but it did not work.

To be more precise, I want to support a 3-Port managed switch with PHY from Micrel using the direct switch link.

I'm actually working on this exact problem at the moment. I'll get a patch out shortly to do so.

Cheers,
g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
#3 lore raw
Quoted 10 lines · Grant Likely
Quoted 9 lines · Wolfgang Grandegger
Quoted 7 lines · Wolfgang Grandegger

Hello,

is it possible to use the FEC on a MPC5200 with the default hardware PHY configuration. I mean running the link with a default speed without handling or even touching the PHY like U-Boot does. I removed the PHY entries from the DTS file and disabled CONFIG_FEC_MPC52xx_MDIO but it did not work.

Quoted 5 lines
Quoted 2 lines

To be more precise, I want to support a 3-Port managed switch with PHY from Micrel using the direct switch link.

I'm actually working on this exact problem at the moment. I'll get a patch out shortly to do so.

Great, if I can help with testing, please let me know.

Wolfgang.