MPEG2TS and HVR-1300
Hi all,
we have here at our office an Hauppauge HVR 1300. It's working under Linux 2.6.24 but we've not been able to make MPEG2/TS work. MPEG2/PS is working fine though.
From what I read, it looks like the Conexant CX23416 chipset should
supports Transport Stream but we've not been able to use it. Are we missing something ?
Kind regards.
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 9 lines · Frederic CAND
Hi all,
we have here at our office an Hauppauge HVR 1300. It's working under Linux 2.6.24 but we've not been able to make MPEG2/TS work. MPEG2/PS is working fine though.
From what I read, it looks like the Conexant CX23416 chipset should
supports Transport Stream but we've not been able to use it. Are we missing something ?
Last I heard transport mode was disabled in the firmware sometime ago by Conexant, in favor of some other feature being enabled.
If you can find really early firmware for the PVR150 then you might try that. (Circa 3-4 years ago).
- Steve
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 11 lines · Steven Toth
Quoted 9 lines · Frederic CAND
Hi all,
we have here at our office an Hauppauge HVR 1300. It's working under Linux 2.6.24 but we've not been able to make MPEG2/TS work. MPEG2/PS is working fine though.
From what I read, it looks like the Conexant CX23416 chipset should
supports Transport Stream but we've not been able to use it. Are we missing something ?
Quoted 6 lines
Last I heard transport mode was disabled in the firmware sometime ago by Conexant, in favor of some other feature being enabled.
If you can find really early firmware for the PVR150 then you might try that. (Circa 3-4 years ago).
Please note: if you do find the older firmware, you will have to patch cx88-blackbird.c to allow firmware size 262144.
If this works for you, please post your results.
Regards,
Mike
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 18 lines · Michael Krufky
Quoted 7 lines · Steven Toth
Quoted 6 lines · Frederic CAND
Hi all,
we have here at our office an Hauppauge HVR 1300. It's working under Linux 2.6.24 but we've not been able to make MPEG2/TS work. MPEG2/PS is working fine though.
Quoted 9 lines
Quoted 3 lines
From what I read, it looks like the Conexant CX23416 chipset should
supports Transport Stream but we've not been able to use it. Are we missing something ?Last I heard transport mode was disabled in the firmware sometime ago by Conexant, in favor of some other feature being enabled.
If you can find really early firmware for the PVR150 then you might try that. (Circa 3-4 years ago).
Quoted 8 lines
Please note: if you do find the older firmware, you will have to patch
cx88-blackbird.cto allow firmware size 262144.If this works for you, please post your results.
Regards,
Mike
Sure, I will.
Regards.
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb