HTB and ingress scheduler SMP Soft Lockup in 2.6.23-2.6.25-rc8
Subsystems (3)
Hi everyone,
I stumbled by chance in a deadlock condition using HTB and the ingress scheduler at the same time.
- The bug seems to have been introduced in 2.6.23 and forward ( 2.6.22 works fine )
- Tested up to 2.6.25-rc8
I found a temporary workaround ( the ingress didnt have a reason to be there in first place , just omitting it from the script avoids the condition ), but it would be nice to have a proper fix. Let me know if more data/testing is needed.
- Enrico
Server Configuration:
---------------------
Centos 4.6 , DELL R200
Vanilla SMP Kernel 2.6.25-rc8 ( see below for configuration )
Network configuration:
-----------------------
eth0 - Simulated WAN ( 192.168.1.8/24 )
eth1 - LAN ( 10.2.0.1/16 )
Crasher script
------------------------
#!/bin/sh
#set -x
iptables -F -t filter
iptables -F -t mangle
iptables -F -t nat
iptables -X -t filter
iptables -X -t mangle
iptables -X -t nat
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT
# enable forwarding echo 1 > /proc/sys/net/ipv4/ip_forward # enable nat from 10.2.0.0/16 iptables -t nat -I POSTROUTING -o eth0 -s 10.2.0.0/16 -j MASQUERADE # init htb tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1: classid 1:1 htb rate 1500kbit ceil 1500kbit quantum 1514 prio 0 tc class add dev eth0 parent 1:1 classid 1:301 htb rate 1500kbit ceil 1500kbit quantum 1514 prio 0 #----------- comment the next two lines to avoid the crash tc qdisc del dev eth0 ingress tc qdisc add dev eth0 ingress #----------- while true ; do tc filter del dev eth0 parent 1:0 protocol ip prio 2 tc class del dev eth0 classid 1:1000 # crash happens here, kernel stuck in the previous tc command tc class add dev eth0 parent 1:301 classid 1:1000 htb rate 1000kbit ceil 1000kbit prio 1 quantum 1514 tc filter add dev eth0 parent 1:0 protocol ip prio 2 handle 0x1000 fw flowid 1:1000 iptables -t mangle -I FORWARD -o eth0 --source 10.2.0.0/16 -j MARK --set-mark 0x1000 echo -e ".\c" sleep 1 done
How to test
-----------
On a client connected to the LAN , with 10.2.0.1 as a gateway, start an iperf session as follow ( an iperf -s is running on the host 192.168.1.1 )
iperf -c 192.168.1.1 -t 2000 -i 1
On the server, run the crasher script as the client continues running the iperf test the server should freeze almost instantly. After a while the console spits out the following:
Kernel message
--------------
BUG: soft lockup - CPU#0 stuck for 61s! [tc:5667]
Pid: 5667, comm: tc Not tainted (2.6.25-rc8 #1) EIP: 0060:[<c0282564>] EFLAGS: 00000287 CPU: 0 EIP is at qdisc_lookup+0x21/0x4b EAX: f7261224 EBX: f7261000 ECX: f0de6300 EDX: f0de634c ESI: ffff0000 EDBUG: soft lockup - CPU#0 stuck for 61s! [tc:5667]
Pid: 5667, comm: tc Not tainted (2.6.25-rc8 #1) EIP: 0060:[<c0282564>] EFLAGS: 00000287 CPU: 0 EIP is at qdisc_lookup+0x21/0x4b EAX: f7261224 EBX: f7261000 ECX: f0de6300 EDX: f0de634c ESI: ffff0000 EDI: f8ac4120 EBP: DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 80050033 CR2: 003c30d0 CR3: 36f09000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c02828a4>] qdisc_tree_decrease_qlen+0x24/0x6f
[<f8b07c28>] htb_delete+0x97/0x12b [sch_htb] [<c02835cf>] tc_ctl_tclass+0x1b4/0x231 [<c028341b>] ? tc_ctl_tclass+0x0/0x231 [<c027ea92>] rtnetlink_rcv_msg+0x181/0x18d [<c027e911>] ? rtnetlink_rcv_msg+0x0/0x18d [<c02887f7>] netlink_rcv_skb+0x38/0x83 [<c027eab5>] rtnetlink_rcv+0 [<c028767f>] netlink_unicast+0x127/0x177 [<c0287ebf>] netlink_sendmsg+0x241/0x250 [<c026aee1>] sock_sendmsg+0xb8/0xcf [<c026b08b>] ? sock_recvmsg+0xc2/0xda [<c012ca68>] ? autoremove_wake_function+0x0/0x33
[<c01dd0cd>] ? copy_from_user+0x3b/0x5e [<c0271f34>] ? verify_iovec+0x40/0x74 [<c026c403>] sys_sendmsg+0x175/0x1dc [<c0156cc1>] ? __do_fault+0x2d2/0x326 [<c0149554>] ? unlock_page+0x25/0x28 [<c0156cd5>] ? __do_fault+0x2e6/0x326 [<c0112a8b>] ? do_page_fault+0x1c0/0x406 [<c01369c7>] ? __lock_release+0 [<c026c780>] sys_socketcall+0x164/0x17f [<c01358ad>] ? trace_hardirqs_on+0xe1/0x102 [<c01036fe>] sysenter_past_esp+0x5f/0xa5 ======================= BUG: soft lockup - CPU#1 stuck for 61s! [ksoftirqd/1:7]
Pid: 7, comm: ksoftirqd/1 Not tainted (2.6.25-rc8 #1) EIP: 0060:[<c010845f>] EFLAGS: 00000246 CPU: 1 EIP is at native_read_tsc+0xe/0x13 EAX: 16ae9694 EBX: 16ae9628 ECX: 00000001 EDX: 00000175 ESI: 00000001 EDI: f7261200 EBP: c0425de8 ESP: c0425de8 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 003e37b0 CR3: 00421000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c01dc78a>] delay_tsc+0x15/0x1f [<c01dc7ac>] __delay+0x9/0xb [<c01df94f>] __spin_lock_debug+0x56/0xab [<c01dfa0d>] _raw_spin_lock+0x69/0x7e
[<c02d4185>] _spin_lock+0x20/0x25 [<c027520e>] ? dev_queue_xmit+0x171/0x2c1 [<c027520e>] dev_queue_xmit+0x171/0x2c1 [<c028a4b5>] ? nf_hook_slow+0xcf/0xda [<c0291f76>] ip_finish_output+0x1fc/0x237 [<c0292373>] ip_output+0x83/0x88 [<c0290a2f>] ip_forward_finish+0x2f/0x32 [<c0290c5c>] ip_forward+0x22a/0x27a [<c028fbb3>] ip_rcv_finish+0x29d/0x2bc [<c028fde4>] ip_rcv+0x212/0x23e [<c0275861>] netif_receive_skb+0x28b/0x2be [<f899446b>] e1000_clean_rx_irq+0x3b7/0x468 [e1000] [<f8993d66>] e1000_clean+0x60/0xd8 [e1000] [<c0275a38>] net_rx_action+0x72/0x14c [<c0120b25>] __do_softirq+0x73/0xe6 [<c0105b43>] do_softirq+0x5d/0xbd [<c0121000>] ksoftirqd+0x5b/0xc1 [<c0120fa5>] ? ksoftirqd+0x0/0xc1 [<c012c606>] kthread+0x37/0x59 [<c012c5cf>] ? kthread+0x0/0x59 [<c010440f>] kernel_thread_helper+0x7/0x10 =======================
Kernel configuration
--------------------
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc8
# Fri Apr 11 12:55:58 2008
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=yCONFIG_X86_SMP=yCONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=yCONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not setCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not setCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not setCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_COMPAT_BRK=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=y
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not setCONFIG_X86_GENERICARCH=y
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not setCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not setCONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not setCONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not setCONFIG_X86_GENERIC=yCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_XADD=yCONFIG_X86_PPRO_FENCE=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_X86_DEBUGCTLMSR=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not setCONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not setCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not setCONFIG_X86_MCE_P4THERMAL=yCONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not setCONFIG_MICROCODE=mCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not setCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=yCONFIG_IRQBALANCE=yCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not setCONFIG_COMPAT_VDSO=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not setCONFIG_BINFMT_MISC=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=yCONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not setCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=mCONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y
# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not setCONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not setCONFIG_NF_CT_PROTO_GRE=mCONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not setCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not setCONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not setCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not setCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV4=mCONFIG_NF_CONNTRACK_PROC_COMPAT=yCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PROTO_GRE=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not setCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_NF_NAT_SIP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not setCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not setCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not setCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not setCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=m
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not setCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=m
# CONFIG_GACT_PROB is not setCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not setCONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not setCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not setCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
# CONFIG_PNPACPI is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not setCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not setCONFIG_HAVE_IDE=yCONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=yCONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not setCONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not setCONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not setCONFIG_BLK_DEV_RZ1000=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not setCONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not setCONFIG_BLK_DEV_SVWKS=yCONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters #
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=yCONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not setCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not setCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_HPTIOP is not setCONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not setCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=m
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not setCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=m
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=m
# CONFIG_MD_RAID0 is not setCONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not setCONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not setCONFIG_FUSION=yCONFIG_FUSION_SPI=mCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=40CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not setCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not setCONFIG_NET_ETHERNET=yCONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not setCONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not setCONFIG_VORTEX=mCONFIG_TYPHOON=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not setCONFIG_NET_TULIP=y
# CONFIG_DE2104X is not setCONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not setCONFIG_EEPRO100=mCONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not setCONFIG_8139CP=mCONFIG_8139TOO=mCONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not setCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not setCONFIG_E1000=mCONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not setCONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not setCONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not setCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not setCONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not setCONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=64CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not setCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=mCONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not setCONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=mCONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not setCONFIG_NVRAM=mCONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not setCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=8192CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not setCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=m
# CONFIG_IBMASR is not setCONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_HP_WATCHDOG is not setCONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not setCONFIG_CPU5_WDT=m
# CONFIG_SMSC37B787_WDT is not setCONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not setCONFIG_W83877F_WDT=m
# CONFIG_W83977F_WDT is not setCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#CONFIG_PCWATCHDOG=m
# CONFIG_MIXCOMWD is not setCONFIG_WDT=m
# CONFIG_WDT_501 is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not setCONFIG_HID_SUPPORT=yCONFIG_HID=yCONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not setCONFIG_USB_SERIAL=mCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not setCONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not setCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=mCONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not setCONFIG_USB_SERIAL_FUNSOFT=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not setCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not setCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not setCONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=y
#
# Conflicting RTC option has been selected, check GEN_RTC and RTC #CONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_DELL_RBU=mCONFIG_DCDBAS=mCONFIG_DMIID=y
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not setCONFIG_JBD=yCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not setCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not setCONFIG_EARLY_PRINTK=yCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not setCONFIG_4KSTACKS=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_BLKCIPHER=m
# CONFIG_CRYPTO_SEQIV is not setCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not setCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not setCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not setCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not setCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_586=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not setCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not setCONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not setCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=mCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
begin:vcard
fn:Enrico Demarin
n:Demarin;Enrico
org:Superclick Networks;R&D
adr:;;10222 St Michel;Montreal;QC;H1H5H1;Canada
email;internet:[email protected]
title:Director
tel;work:514-847-0333x246
x-mozilla-html:FALSE
url:http://www.superclick.com
version:2.1
end:vcard
Quoted 5 lines · Enrico Demarin
Kernel message
--------------BUG: soft lockup - CPU#0 stuck for 61s! [tc:5667] Pid: 5667, comm: tc Not tainted (2.6.25-rc8 #1) EIP: 0060:[<c0282564>] EFLAGS: 00000287 CPU: 0 EIP is at qdisc_lookup+0x21/0x4b EAX: f7261224 EBX: f7261000 ECX: f0de6300 EDX: f0de634c ESI: ffff0000 EDBUG: soft lockup - CPU#0 stuck for 61s!...
This is unfortunately almost unreadable. Please resend the message as attachment.
Hi Patrick,
here it is, hope it will work out this time
- Enrico
Quoted 10 lines · Patrick McHardy
Quoted 5 lines · Enrico Demarin
Kernel message
--------------BUG: soft lockup - CPU#0 stuck for 61s! [tc:5667] Pid: 5667, comm: tc Not tainted (2.6.25-rc8 #1) EIP: 0060:[<c0282564>] EFLAGS: 00000287 CPU: 0 EIP is at qdisc_lookup+0x21/0x4b EAX: f7261224 EBX: f7261000 ECX: f0de6300 EDX: f0de634c ESI: ffff0000 EDBUG: soft lockup - CPU#0 stuck for 61s!...
This is unfortunately almost unreadable. Please resend the message as attachment.
BUG: soft lockup - CPU#0 stuck for 61s! [tc:5667]
Pid: 5667, comm: tc Not tainted (2.6.25-rc8 #1)
EIP: 0060:[<c0282564>] EFLAGS: 00000287 CPU: 0
EIP is at qdisc_lookup+0x21/0x4b
EAX: f7261224 EBX: f7261000 ECX: f0de6300 EDX: f0de634c
ESI: ffff0000 EDBUG: soft lockup - CPU#0 stuck for 61s! [tc:5667]
Pid: 5667, comm: tc Not tainted (2.6.25-rc8 #1)
EIP: 0060:[<c0282564>] EFLAGS: 00000287 CPU: 0 EIP is at qdisc_lookup+0x21/0x4b
EAX: f7261224 EBX: f7261000 ECX: f0de6300 EDX: f0de634c
ESI: ffff0000 EDI: f8ac4120 EBP:
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 80050033 CR2: 003c30d0 CR3: 36f09000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<c02828a4>] qdisc_tree_decrease_qlen+0x24/0x6f [<f8b07c28>] htb_delete+0x97/0x12b [sch_htb] [<c02835cf>] tc_ctl_tclass+0x1b4/0x231 [<c028341b>] ? tc_ctl_tclass+0x0/0x231 [<c027ea92>] rtnetlink_rcv_msg+0x181/0x18d [<c027e911>] ? rtnetlink_rcv_msg+0x0/0x18d [<c02887f7>] netlink_rcv_skb+0x38/0x83 [<c027eab5>] rtnetlink_rcv+0 [<c028767f>] netlink_unicast+0x127/0x177 [<c0287ebf>] netlink_sendmsg+0x241/0x250 [<c026aee1>] sock_sendmsg+0xb8/0xcf [<c026b08b>] ? sock_recvmsg+0xc2/0xda [<c012ca68>] ? autoremove_wake_function+0x0/0x33 [<c01dd0cd>] ? copy_from_user+0x3b/0x5e [<c0271f34>] ? verify_iovec+0x40/0x74 [<c026c403>] sys_sendmsg+0x175/0x1dc [<c0156cc1>] ? __do_fault+0x2d2/0x326 [<c0149554>] ? unlock_page+0x25/0x28 [<c0156cd5>] ? __do_fault+0x2e6/0x326 [<c0112a8b>] ? do_page_fault+0x1c0/0x406 [<c01369c7>] ? __lock_release+0 [<c026c780>] sys_socketcall+0x164/0x17f [<c01358ad>] ? trace_hardirqs_on+0xe1/0x102 [<c01036fe>] sysenter_past_esp+0x5f/0xa5 ======================= BUG: soft lockup - CPU#1 stuck for 61s! [ksoftirqd/1:7]
Pid: 7, comm: ksoftirqd/1 Not tainted (2.6.25-rc8 #1)
EIP: 0060:[<c010845f>] EFLAGS: 00000246 CPU: 1 EIP is at native_read_tsc+0xe/0x13
EAX: 16ae9694 EBX: 16ae9628 ECX: 00000001 EDX: 00000175
ESI: 00000001 EDI: f7261200 EBP: c0425de8 ESP: c0425de8
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 003e37b0 CR3: 00421000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<c01dc78a>] delay_tsc+0x15/0x1f [<c01dc7ac>] __delay+0x9/0xb [<c01df94f>] __spin_lock_debug+0x56/0xab [<c01dfa0d>] _raw_spin_lock+0x69/0x7e [<c02d4185>] _spin_lock+0x20/0x25 [<c027520e>] ? dev_queue_xmit+0x171/0x2c1 [<c027520e>] dev_queue_xmit+0x171/0x2c1 [<c028a4b5>] ? nf_hook_slow+0xcf/0xda [<c0291f76>] ip_finish_output+0x1fc/0x237 [<c0292373>] ip_output+0x83/0x88 [<c0290a2f>] ip_forward_finish+0x2f/0x32 [<c0290c5c>] ip_forward+0x22a/0x27a [<c028fbb3>] ip_rcv_finish+0x29d/0x2bc [<c028fde4>] ip_rcv+0x212/0x23e [<c0275861>] netif_receive_skb+0x28b/0x2be [<f899446b>] e1000_clean_rx_irq+0x3b7/0x468 [e1000] [<f8993d66>] e1000_clean+0x60/0xd8 [e1000] [<c0275a38>] net_rx_action+0x72/0x14c [<c0120b25>] __do_softirq+0x73/0xe6 [<c0105b43>] do_softirq+0x5d/0xbd [<c0121000>] ksoftirqd+0x5b/0xc1 [<c0120fa5>] ? ksoftirqd+0x0/0xc1 [<c012c606>] kthread+0x37/0x59 [<c012c5cf>] ? kthread+0x0/0x59 [<c010440f>] kernel_thread_helper+0x7/0x10 =======================
begin:vcard
fn:Enrico Demarin
n:Demarin;Enrico
org:Superclick Networks;R&D
adr:;;10222 St Michel;Montreal;QC;H1H5H1;Canada email;internet:[email protected] title:Director
tel;work:514-847-0333x246
x-mozilla-html:FALSE url:http://www.superclick.com
version:2.1
end:vcard
Quoted 3 lines · Enrico Demarin
Hi Patrick,
here it is, hope it will work out this time
Thanks. Could you try whether this patch fixes it please?
net/sched/sch_htb.c +1 -1
@@ -1398,7 +1398,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,/* create leaf qdisc early because it uses kmalloc(GFP_KERNEL) so that can't be used inside of sch_tree_lock -- thanks to Karlis Peisenieks */ - new_q =qdisc_create_dflt (sch->dev, &pfifo_qdisc_ops, classid); + new_q =qdisc_create_dflt (sch->dev, &pfifo_qdisc_ops, parent);sch_tree_lock (sch);if (parent && !parent->level) {unsigned int qlen = parent->un.leaf.q->q.qlen;
Quoted 6 lines · Patrick McHardy
Quoted 3 lines · Enrico Demarin
Hi Patrick,
here it is, hope it will work out this time
Thanks. Could you try whether this patch fixes it please?
That one was broken, this one should work.
net/sched/sch_htb.c +2 -1
@@ -1398,7 +1398,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,/* create leaf qdisc early because it uses kmalloc(GFP_KERNEL) so that can't be used inside of sch_tree_lock -- thanks to Karlis Peisenieks */ - new_q =qdisc_create_dflt (sch->dev, &pfifo_qdisc_ops, classid); + new_q =qdisc_create_dflt (sch->dev, &pfifo_qdisc_ops, + parent->classid);sch_tree_lock (sch);if (parent && !parent->level) {unsigned int qlen = parent->un.leaf.q->q.qlen;
Quoted 10 lines · Patrick McHardy
Quoted 6 lines · Patrick McHardy
Quoted 3 lines · Enrico Demarin
Hi Patrick,
here it is, hope it will work out this time
Thanks. Could you try whether this patch fixes it please?
That one was broken, this one should work.
Actually both don't fix the problem, sorry. Will retry after another coffee :)
Quoted 3 lines · Enrico Demarin
Hi Patrick,
here it is, hope it will work out this time
I can't figure out the problem. Could you retry using this patch? It should hopefully show us on which class qdisc_decrease_qlen is looping.
net/sched/sch_htb.c +1 -0
@@ -1171,6 +1171,7 @@ static void htb_qlen_notify(struct Qdisc *sch, unsigned long arg) {struct htb_class *cl = (struct htb_class *)arg; +printk ("htb_qlen_notify classid=%x\n" , cl->classid);if (cl->un.leaf.q->q.qlen ==0 )htb_deactivate (qdisc_priv (sch), cl); }
Enrico Demarin wrote, On 04/11/2008 08:37 PM:
Quoted 5 lines
Hi everyone,
I stumbled by chance in a deadlock condition using HTB and the ingress scheduler at the same time.
Quoted 8 lines
- The bug seems to have been introduced in 2.6.23 and forward ( 2.6.22 works fine )
- Tested up to 2.6.25-rc8I found a temporary workaround ( the ingress didnt have a reason to be there in first place , just omitting it from the script avoids the condition ), but it would be nice to have a proper fix. Let me know if more data/testing is needed.
Hi,
It's a very nice test and results, but alas I don't have 3 boxes around, so I wonder if you could try this debugging patch below?
I think one of possible reasons could be a qdisc with the same handle and parent ids, like ingress, but I can't see how it could be referenced by your htb classes yet...
Thanks,
Jarek P.
---
net/sched/sch_api.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
net/sched/sch_api.c +7 -0
@@ -386,11 +386,18 @@ void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n)if (n ==0 )return ;while ((parentid = sch->parent)) { +struct Qdisc *sch_old = sch; + sch =qdisc_lookup (sch->dev,TC_H_MAJ (parentid));if (sch ==NULL ) {WARN_ON (parentid !=TC_H_ROOT );return ; } +if (sch == sch_old) { +printk ("qdisc loop: %p, %x\n" , sch, sch->parent); +return ; + } + cops = sch->ops->cl_ops;if (cops->qlen_notify) { cl = cops->get (sch, parentid);
PATCH 1/1 sch_api: fix qdisc_tree_decrease_qlen() loop
Quoted 1 line · Jarek Poplawski
Enrico Demarin wrote, On 04/11/2008 08:37 PM:
...
Quoted 2 lines
Quoted 2 lines
I stumbled by chance in a deadlock condition using HTB and the ingress scheduler at the same time.
...
Quoted 3 lines
I think one of possible reasons could be a qdisc with the same handle and parent ids, like ingress, but I can't see how it could be referenced by your htb classes yet...
I think I got it! Enrico wrote to me he will not be able to test before monday, but IMHO this fix is obvious here...
Regards,
Jarek P.
--------------->
[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
TC_H_MAJ(parentid) for root classes is the same as for ingress, and if ingress qdisc is created qdisc_lookup() returns its pointer (without ingress NULL is returned). After this all qdisc_lookups give the same, and we get endless loop. (I don't know how this could hide for so long - it should trigger with every leaf class deleted if it's qdisc isn't empty.)
After this fix qdisc_lookup() is omitted both for ingress and root parents, but looking for root is only wasting a little time here... Many thanks to Enrico Demarin for finding a test for catching this bug, which probably bothered quite a lot of admins.
---
net/sched/sch_api.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
net/sched/sch_api.c +3 -0
@@ -386,6 +386,9 @@ void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n)if (n ==0 )return ;while ((parentid = sch->parent)) { +if (TC_H_MAJ (parentid) ==TC_H_MAJ (TC_H_INGRESS )) +return ; + sch =qdisc_lookup (sch->dev,TC_H_MAJ (parentid));if (sch ==NULL ) {WARN_ON (parentid !=TC_H_ROOT );
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
Quoted 9 lines · Jarek Poplawski
[
NET_SCHED]sch_api: fixqdisc_tree_decrease_qlen()loop
TC_H_MAJ(parentid)for root classes is the same as for ingress, and if ingress qdisc is createdqdisc_lookup()returns its pointer (without ingress NULL is returned). After this allqdisc_lookupsgive the same, and we get endless loop. (I don't know how this could hide for so long - it should trigger with every leaf class deleted if it's qdisc isn't empty.)
Quoted 5 lines
After this fix
qdisc_lookup()is omitted both for ingress and root parents, but looking for root is only wasting a little time here... Many thanks to Enrico Demarin for finding a test for catching this bug, which probably bothered quite a lot of admins.
Good catch, I agree that this is the reason for sure.
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
From: Patrick McHardy <[email protected]>
Date: Mon, 14 Apr 2008 22:28:52 +0200
Quoted 10 lines
Quoted 9 lines · Jarek Poplawski
[
NET_SCHED]sch_api: fixqdisc_tree_decrease_qlen()loop
TC_H_MAJ(parentid)for root classes is the same as for ingress, and if ingress qdisc is createdqdisc_lookup()returns its pointer (without ingress NULL is returned). After this allqdisc_lookupsgive the same, and we get endless loop. (I don't know how this could hide for so long - it should trigger with every leaf class deleted if it's qdisc isn't empty.)
Quoted 7 lines
Quoted 5 lines
After this fix
qdisc_lookup()is omitted both for ingress and root parents, but looking for root is only wasting a little time here... Many thanks to Enrico Demarin for finding a test for catching this bug, which probably bothered quite a lot of admins.Good catch, I agree that this is the reason for sure.
I'll take that as an ACK :-)
Applied, thanks everyone!
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
On Mon, Apr 14, 2008 at 03:11:02PM -0700, David Miller wrote:
...
Quoted 1 line
Quoted 1 line
Jarek Poplawski wrote:
...
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
After this fix
qdisc_lookup()is omitted both for ingress and root parents, but looking for root is only wasting a little time here...
...Actually, there is yet a possibility that somebody uses ffff:
handle for a qdisc (not ingress), which could make here a little difference, so this place could be improved for this case (even with something like my earlier debugging patch in this thread, which BTW could be a safety for maybe some other quirks here), but it seems it would be better to discourage using this handle for anything but ingress.
Jarek P.
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
Quoted 7 lines · Jarek Poplawski
On Mon, Apr 14, 2008 at 03:11:02PM -0700, David Miller wrote:
...Quoted 1 line
Quoted 1 line
Jarek Poplawski wrote:
...
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
After this fix
qdisc_lookup()is omitted both for ingress and root parents, but looking for root is only wasting a little time here...
Quoted 7 lines
...Actually, there is yet a possibility that somebody uses ffff:
handle for a qdisc (not ingress), which could make here a little difference, so this place could be improved for this case (even with something like my earlier debugging patch in this thread, which BTW could be a safety for maybe some other quirks here), but it seems it would be better to discourage using this handle for anything but ingress.
I don't think we should do that, it would be preferable to compare the entire handle instead of just the major to avoid this.
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
Quoted 17 lines · Patrick McHardy
Quoted 7 lines · Jarek Poplawski
On Mon, Apr 14, 2008 at 03:11:02PM -0700, David Miller wrote:
...Quoted 1 line
Quoted 1 line
Jarek Poplawski wrote:
...
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
After this fix
qdisc_lookup()is omitted both for ingress and root parents, but looking for root is only wasting a little time here...Quoted 7 lines
...Actually, there is yet a possibility that somebody uses ffff:
handle for a qdisc (not ingress), which could make here a little difference, so this place could be improved for this case (even with something like my earlier debugging patch in this thread, which BTW could be a safety for maybe some other quirks here), but it seems it would be better to discourage using this handle for anything but ingress.
Quoted 3 lines
I don't think we should do that, it would be preferable to compare the entire handle instead of just the major to avoid this.
Probably you are right... I guess you could handle this?
Regards,
Jarek P.
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
Quoted 16 lines · Jarek Poplawski
Quoted 15 lines · Patrick McHardy
Quoted 13 lines · Jarek Poplawski
On Mon, Apr 14, 2008 at 03:11:02PM -0700, David Miller wrote:
...Quoted 1 line
Quoted 1 line
Jarek Poplawski wrote:
...
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
After this fix
qdisc_lookup()is omitted both for ingress and root parents, but looking for root is only wasting a little time here......Actually, there is yet a possibility that somebody uses ffff:
handle for a qdisc (not ingress), which could make here a little difference, so this place could be improved for this case (even with something like my earlier debugging patch in this thread, which BTW could be a safety for maybe some other quirks here), but it seems it would be better to discourage using this handle for anything but ingress.
Quoted 5 lines
Quoted 3 lines
I don't think we should do that, it would be preferable to compare the entire handle instead of just the major to avoid this.
Probably you are right... I guess you could handle this?
On second thought I agree with you, the behaviour is inconsistent and FFFF: shouldn't be used as major, otherwise the major doesn't uniquely identify a qdisc anymore.
net/sched/sch_api.c +1 -1
@@ -386,7 +386,7 @@ void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n)if (n ==0 )return ;while ((parentid = sch->parent)) { -if (TC_H_MAJ (parentid) ==TC_H_MAJ (TC_H_INGRESS )) +if (parentid ==TC_H_INGRESS )return ; sch =qdisc_lookup (sch->dev,TC_H_MAJ (parentid));
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
net/sched/sch_api.c
Quoted 18 lines · Patrick McHardy
Quoted 5 lines · Jarek Poplawski
Quoted 3 lines
I don't think we should do that, it would be preferable to compare the entire handle instead of just the major to avoid this.
Probably you are right... I guess you could handle this?
On second thought I agree with you, the behaviour is inconsistent and FFFF: shouldn't be used as major, otherwise the major doesn't uniquely identify a qdisc anymore.
net/sched/sch_api.c +0
-0
That patch shouldn't have been there, please ignore :)
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
In reply to Patrick McHardyOn Tue, Apr 15, 2008 at 03:09:53PM +0200, Patrick McHardy wrote:
...
Quoted 3 lines
On second thought I agree with you, the behaviour is inconsistent and FFFF: shouldn't be used as major, otherwise the major doesn't uniquely identify a qdisc anymore.
Like ingress vs. root handle? I think it's more about additional checks (and good memory).
net/sched/sch_api.c void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n) · line 389
Quoted 10 lines
net/sched/sch_api.c +1
-1@@ -386,7 +386,7 @@ void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n)if (n ==0 )return ;while ((parentid = sch->parent)) { -if (TC_H_MAJ (parentid) ==TC_H_MAJ (TC_H_INGRESS )) +if (parentid ==TC_H_INGRESS )
Maybe like this?:
+ if (parentid == TC_H_ROOT || parentid == TC_H_INGRESS)
net/sched/sch_api.c void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n) · line 392
Quoted 3 lines
net/sched/sch_api.c +0
-0return ; sch =qdisc_lookup (sch->dev,TC_H_MAJ (parentid));
Jarek P.
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
Quoted 8 lines · Jarek Poplawski
On Tue, Apr 15, 2008 at 03:09:53PM +0200, Patrick McHardy wrote:
...Quoted 3 lines
On second thought I agree with you, the behaviour is inconsistent and FFFF: shouldn't be used as major, otherwise the major doesn't uniquely identify a qdisc anymore.
Like ingress vs. root handle? I think it's more about additional checks (and good memory).
...That's why better discourage...
Quoted 14 lines
net/sched/sch_api.c void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n) · line 389
Quoted 11 lines
net/sched/sch_api.c +1
-1@@ -386,7 +386,7 @@ void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n)if (n ==0 )return ;while ((parentid = sch->parent)) { -if (TC_H_MAJ (parentid) ==TC_H_MAJ (TC_H_INGRESS )) +if (parentid ==TC_H_INGRESS )Maybe like this?:
+ if (parentid ==TC_H_ROOT|| parentid ==TC_H_INGRESS)
Still wrong! Rather this:
while ((parentid = sch->parent)) {
if (parentid == TC_H_ROOT)
return; sch = qdisc_lookup(sch->dev, TC_H_MAJ(parentid));
if (!sch || sch->parentid == TC_H_INGRESS) {
...Jarek P.
Re: [PATCH][NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
Quoted 2 lines · Jarek Poplawski
Quoted 1 line · Jarek Poplawski
On Tue, Apr 15, 2008 at 03:09:53PM +0200, Patrick McHardy wrote:
...
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
net/sched/sch_api.c +0
-0@@ -386,7 +386,7 @@ void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n)Quoted 8 lines
net/sched/sch_api.c void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n) · line 389
Quoted 5 lines
net/sched/sch_api.c +1
-1if (n ==0 )return ;while ((parentid = sch->parent)) { -if (TC_H_MAJ (parentid) ==TC_H_MAJ (TC_H_INGRESS )) +if (parentid ==TC_H_INGRESS )Maybe like this?:
+ if (parentid ==TC_H_ROOT|| parentid ==TC_H_INGRESS)
Quoted 5 lines
Still wrong! Rather this:
while ((parentid = sch->parent)) { if (parentid == TC_H_ROOT) return;
...Hmm... it seems to be enough?! (At least with current ingress functionality.)
Quoted 4 lines
sch = qdisc_lookup(sch->dev, TC_H_MAJ(parentid));
if (!sch || sch->parentid == TC_H_INGRESS) {
......and here WARN_ON() instead of if (): root is never looked up, so we can't get NULL nor ingress here; if we have non-ingress ffff:0000 we'll get it (and ingress can't co-exist).
Jarek P.