Skip to contentSkip to conversation

TX53-8030 Memory Speed

DISCUSSION Günter Gebhardt 2 participants 2 messages Nov 15, 2012

lore
Share & tools
lore
#0 lore raw

Hello,

we integrated KARO TX53-8030 support into our barebox 2012.07.0 some month ago.

We measured the performance of memcpy() and found that the throughput is only 19MB/s. We expected it to be something like 10 times faster.

We saw that there is support for the TX-53 in general within the head of barebox.

Within the file arch/arm/boards/karo-tx53/flash_header.c it is stated that it only supports TX53 1011 (i.e. 1GB RAM).

Do You have settings applicable to our device?

What throughput do You expect from this device?

Are there some things to be aware of?

Kind Regard,
Guenter Gebhadt

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#1 lore raw
Quoted 5 lines · Günter Gebhardt

Hello,

we integrated KARO TX53-8030 support into our barebox 2012.07.0 some month ago.

Quoted 8 lines

We measured the performance of memcpy() and found that the throughput is only 19MB/s. We expected it to be something like 10 times faster.

We saw that there is support for the TX-53 in general within the head of barebox.

Within the file arch/arm/boards/karo-tx53/flash_header.c it is stated that it only supports TX53 1011 (i.e. 1GB RAM).

Support for the TX53-8030 is currently in the -next branch, but unfortunately it doesn't seem to work properly, see this thread:

http://lists.infradead.org/pipermail/barebox/2012-November/010983.html

Quoted 4 lines

Do You have settings applicable to our device?

What throughput do You expect from this device?

Just rechecked on my 1011 board (I can't find the 8030 board atm, otherwise I would have fixed the support already), it's about 230MB/s using memcpy on the commandline. Probably you don't have the MMU turned on which means you're running without data chaches.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox