Skip to contentSkip to conversation

Fix name of i.MX31 boards in config file header

PATCH New Magnus Lilja 3 participants 4 messages Apr 14, 2008 – Apr 18, 2008 Arm i.MX and Layerscape

lore
Share & tools
lore

Magnus Lilja

author
#0 lore raw

PATCH 1/1 Fix name of i.MX31 boards in config file header

Correct the names of the i.MX31 Litekit and phyCORE boards in config files.

Signed-off-by Magnus Lilja <[email protected]>

---

 include/configs/imx31_litekit.h |    2 +-
 include/configs/imx31_phycore.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
include/configs/imx31_litekit.h +1 -1
index 2a6f59a..777750b 100644
@@ -4,7 +4,7 @@
  * Richard Woodruff <[email protected]>
  * Kshitij Gupta <[email protected]>
  *
- * Configuration settings for the 242x TI H4 board.
+ * Configuration settings for the LogicPD i.MX31 Litekit board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
include/configs/imx31_phycore.h +1 -1
index e067b76..c29654b 100644
@@ -4,7 +4,7 @@
  * Richard Woodruff <[email protected]>
  * Kshitij Gupta <[email protected]>
  *
- * Configuration settings for the 242x TI H4 board.
+ * Configuration settings for the phyCORE i.MX31 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
#1 lore raw

PATCH 1/1 Fix name of i.MX31 boards in config file header

Quoted 2 lines · Magnus Lilja

- * Configuration settings for the 242x TI H4 board.
+ * Configuration settings for the phyCORE i.MX31 board.

This is "phyCORE-i.MX31".

Robert

Signature · 5 lines
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9
author
#2 lore raw

PATCH 1/1 Fix name of i.MX31 boards in config file header

Correct the name of the i.MX31 Litekit and phyCORE boards in config files.

Signed-off-by Magnus Lilja <[email protected]>

---

Corrected the phyCORE name after comment from Robert Schwebel.

 include/configs/imx31_litekit.h |    2 +-
 include/configs/imx31_phycore.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
include/configs/imx31_litekit.h +1 -1
index 2a6f59a..777750b 100644
@@ -4,7 +4,7 @@
  * Richard Woodruff <[email protected]>
  * Kshitij Gupta <[email protected]>
  *
- * Configuration settings for the 242x TI H4 board.
+ * Configuration settings for the LogicPD i.MX31 Litekit board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
include/configs/imx31_phycore.h +1 -1
index e067b76..aaa3390 100644
@@ -4,7 +4,7 @@
  * Richard Woodruff <[email protected]>
  * Kshitij Gupta <[email protected]>
  *
- * Configuration settings for the 242x TI H4 board.
+ * Configuration settings for the phyCORE-i.MX31 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
Applied
#3 lore raw

PATCH 1/1 Fix name of i.MX31 boards in config file header

Quoted 10 lines · In message <[email protected]> you wrote:

Correct the name of the i.MX31 Litekit and phyCORE boards in config files.

Signed-off-by Magnus Lilja <[email protected]>

---

Corrected the phyCORE name after comment from Robert Schwebel.

 include/configs/imx31_litekit.h |    2 +-
 include/configs/imx31_phycore.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Free markets select for winning solutions."        - Eric S. Raymond