Skip to contentSkip to conversation

2.6.25-git1/2 not seeing /dev/sda1 (XFS root) or /dev/sda2 (swap) partitions on a SATA drive

DISCUSSION Sid Boyce 1 participant 1 message Apr 20, 2008

lore
Share & tools
lore

Sid Boyce

author
#0 lore raw
Quoted 8 lines · In article <480A9C1E.8050505@xxxxxxxxxxxxxxxx> you wrote:
Quoted 2 lines

2.6.25 x86_64 boots fine as does -git1/2 boxes using reiserfs and ext3. With xfs it can't find these and drops into a shell.

Do you have reiser and ext3 as modules as well? If yes, how do you load them (i.e. which distribution, bootload and initram you are using?)

Gruss
Bernd

Distro is openSUSE 11.0 Beta1 on all boxes, only one with xfs. I have reiserfs, jfs, ext3 and xfs all as modules, loaded by mkinitrd.

Kernel image:   /boot/2.6.25-git2-smp
Initrd image:   /boot/initrd2.6.25-git2-smp
Root device: /dev/disk/by-id/scsi-SATA_WDC_WD5000AAKS-_WD-WCAS85018679-part1 (/dev/sda1) (mounted on / as xfs)
Resume device:  /dev/sda2
Kernel Modules: processor thermal dock scsi_mod libata sata_sil24 sata_nv pata_amd fan xfs edd sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features:       block usb resume.userspace resume.kernel
Bootsplash:     openSUSE (1024x768)

73057 blocks

From /boot/grub/menu.lst
# Modified by YaST2. Last modification on Sat Apr 19 23:11:11 BST 2008 default 2
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,0)/boot/message

###Don't change this comment - YaST2 identifier: Original name: linux-git2-smp### title 2.6.25-git2-smp

    root (hd0,0)
    kernel /boot/2.6.25-git2-smp 
root=/dev/disk/by-id/scsi-SATA_WDC_WD5000AAKS-_WD-WCAS85018679-part1 vga=0x31a resume=/dev/sda2 splash=silent showopts elevator=cfq
    initrd /boot/initrd2.6.25-git2-smp

Regards
Sid.

Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks