Skip to contentSkip to conversation

i.MX31: Use symbolic names for Litekit membases.

PATCH New Magnus Lilja 2 participants 2 messages Apr 20, 2008 – Apr 25, 2008 Arm i.MX and Layerscape

lore
Share & tools
lore

Magnus Lilja

author
#0 lore raw

PATCH 1/1 i.MX31: Use symbolic names for Litekit membases.

Use symbolic names instead of hard coded addresses for Litekit membases.

Signed-off-by Magnus Lilja <[email protected]>

---

 include/configs/imx31_litekit.h |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)
include/configs/imx31_litekit.h +6 -4
index 605eb40..5e97cfa 100644
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/mx31-regs.h>
+
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
 #define CONFIG_MX31		1    /* in a mx31 */

@@ -91,7 +93,7 @@
 
 
 #define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	0xb4020000
+#define CONFIG_DRIVER_SMC911X_BASE	(CS4_BASE + 0x00020000)
 #define CONFIG_DRIVER_SMC911X_32_BIT	1
 
 /*

@@ -127,18 +129,18 @@
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		0x80000000
+#define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_FLASH_BASE		0xa0000000
+#define CFG_FLASH_BASE		CS0_BASE
 #define CFG_MAX_FLASH_BANKS	1           /* max number of memory banks */
 #define CFG_MAX_FLASH_SECT	128	     /* max number of sectors on one chip */
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE /* Monitor at beginning of flash */
 
-#define CFG_ENV_ADDR		0xa01f0000
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x001f0000)
 #define	CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_SECT_SIZE	(64 * 1024)
 #define CFG_ENV_SIZE		(64 * 1024)
Applied
#1 lore raw

PATCH 1/1 i.MX31: Use symbolic names for Litekit membases.

Quoted 3 lines · In message <[email protected]> you wrote:

Use symbolic names instead of hard coded addresses for Litekit membases.

Signed-off-by Magnus Lilja <[email protected]>

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 9 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
8) Use common sense in routing  cable.  Avoid  wrapping  coax  around
   sources  of  strong  electric  or magnetic fields. Do not wrap the
   cable  around  flourescent  light  ballasts  or  cyclotrons,   for
   example.
- Ethernet Headstart Product, Information and Installation Guide,
   Bell Technologies, pg. 11