Skip to contentSkip to conversation

mac80211: update mesh EID values

PATCH In review Luis Carlos Cobo 2 participants 2 messages Apr 23, 2008 802.11 (including cfg80211/NL80211)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mac80211: update mesh EID values

This patch updates mesh EID values, some of which where conflicting with already-approved 11h EIDs (pointed out by Tomas Winkler). I wanted to use the values suggested in the last available 802.11 draft (2.0) but it assigns 50 to MESH_CONFIG, the same value than EXT_SUPP_RATES. Using the values proposed in the draft incremented by one.

---
 include/linux/ieee80211.h |   20 +++++++++++++-------
 1 files changed, 13 insertions(+), 7 deletions(-)
include/linux/ieee80211.h +13 -7
index c840bd1..0b5e03e 100644
@@ -465,13 +465,19 @@ enum ieee80211_eid {
 	WLAN_EID_TS_DELAY = 43,
 	WLAN_EID_TCLAS_PROCESSING = 44,
 	WLAN_EID_QOS_CAPA = 46,
-	/* 802.11s */
-	WLAN_EID_MESH_CONFIG = 36,      /* Pending IEEE 802.11 ANA approval */
-	WLAN_EID_MESH_ID = 37,          /* Pending IEEE 802.11 ANA approval */
-	WLAN_EID_PEER_LINK = 40,	/* Pending IEEE 802.11 ANA approval */
-	WLAN_EID_PREQ = 53,		/* Pending IEEE 802.11 ANA approval */
-	WLAN_EID_PREP = 54,		/* Pending IEEE 802.11 ANA approval */
-	WLAN_EID_PERR = 55,		/* Pending IEEE 802.11 ANA approval */
+	/* 802.11s
+	 *
+	 * All mesh EID numbers are pending IEEE 802.11 ANA approval.
+	 * The numbers have been incremented from those suggested in
+	 * 802.11s/D2.0 so that MESH_CONFIG does not conflict with
+	 * EXT_SUPP_RATES.
+	 */
+	WLAN_EID_MESH_CONFIG = 51,
+	WLAN_EID_MESH_ID = 52,
+	WLAN_EID_PEER_LINK = 55,
+	WLAN_EID_PREQ = 68,
+	WLAN_EID_PREP = 69,
+	WLAN_EID_PERR = 70,
 	/* 802.11h */
 	WLAN_EID_PWR_CONSTRAINT = 32,
 	WLAN_EID_PWR_CAPABILITY = 33,
Signature · 1 line
1.5.4.3
#1 lore raw
Quoted 39 lines · Luis Carlos Cobo

This patch updates mesh EID values, some of which where conflicting with
already-approved 11h EIDs (pointed out by Tomas Winkler). I wanted to use the values suggested in the last available 802.11 draft (2.0) but it assigns 50 to MESH_CONFIG, the same value than EXT_SUPP_RATES. Using the values proposed in the draft incremented by one.

---

  include/linux/ieee80211.h |   20 +++++++++++++-------
  1 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index c840bd1..0b5e03e 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h

 @@ -465,13 +465,19 @@ enum ieee80211_eid {
        WLAN_EID_TS_DELAY = 43,
        WLAN_EID_TCLAS_PROCESSING = 44,
        WLAN_EID_QOS_CAPA = 46,
 -       /* 802.11s */
 -       WLAN_EID_MESH_CONFIG = 36,      /* Pending IEEE 802.11 ANA approval */
 -       WLAN_EID_MESH_ID = 37,          /* Pending IEEE 802.11 ANA approval */
 -       WLAN_EID_PEER_LINK = 40,        /* Pending IEEE 802.11 ANA approval */
 -       WLAN_EID_PREQ = 53,             /* Pending IEEE 802.11 ANA approval */
 -       WLAN_EID_PREP = 54,             /* Pending IEEE 802.11 ANA approval */
 -       WLAN_EID_PERR = 55,             /* Pending IEEE 802.11 ANA approval */
 +       /* 802.11s
 +        *
 +        * All mesh EID numbers are pending IEEE 802.11 ANA approval.
 +        * The numbers have been incremented from those suggested in
 +        * 802.11s/D2.0 so that MESH_CONFIG does not conflict with
 +        * EXT_SUPP_RATES.
 +        */
 +       WLAN_EID_MESH_CONFIG = 51,
 +       WLAN_EID_MESH_ID = 52,
 +       WLAN_EID_PEER_LINK = 55,
 +       WLAN_EID_PREQ = 68,
 +       WLAN_EID_PREP = 69,
 +       WLAN_EID_PERR = 70,
Quoted 7 lines

/* 802.11h */
WLAN_EID_PWR_CONSTRAINT = 32,
WLAN_EID_PWR_CAPABILITY = 33,
--
1.5.4.3

ACK

Quoted 5 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html