dmidecode for HP dv6000z
I saw in my dmesg output recently, a request to send the output of dmidecode to this address. Please find it attached. This laptop is an HP dv6000z, with an AMD Turion64 dual core processor (I believe you can tell this from the dmesg output also). I've had this laptop for over 1 year now, and I still cannot get it to work reliably (it often has difficulty booting without the noapic option, and it often fails to set the hwclock. I also often get some error message about IRQ7 triggering, "but nobody cared"). I am hoping that whatever information dmidecode provides you with will lead to a solution to my problem.
Attached are two files: the output of dmidecode and the first 200 lines of dmesg.
Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) ([email protected]) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007 Command line: root=/dev/sda5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff00000 (usable)
BIOS-e820: 000000003ff00000 - 000000003ff15000 (ACPI data)
BIOS-e820: 000000003ff15000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 261888) 1 entries of 3200 usedend_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F88F0, 0014 (r0 HP )
ACPI: RSDT 3FF0BB68, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP 3FF14B58, 0074 (r1 HP MCP51M 6040000 PTL_ F4240)
ACPI: DSDT 3FF0BBA8, 8FB0 (r1 HP MCP51M 6040000 MSFT 3000000)
ACPI: FACS 3FF15FC0, 0040
ACPI: SSDT 3FF14BCC, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: MCFG 3FF14D90, 003C (r1 HP MCFG 6040000 LTP 0)
ACPI: HPET 3FF14DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
ACPI: APIC 3FF14E04, 005E (r1 HP APIC 6040000 LTP 0)
ACPI: BOOT 3FF14E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1)
ACPI: SLIC 3FF14E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003ff00000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 261888) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003ff00000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 261888On node 0 totalpages: 261789
DMA zone: 56 pages used for memmap
DMA zone: 1020 pages reserved
DMA zone: 2921 pages, LIFO batch:0
DMA32 zone: 3524 pages used for memmap
DMA32 zone: 254268 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37896 bytes of per cpu data
Built 1 zonelists. Total pages: 257189
Kernel command line: root=/dev/sda5 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1808.229 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ db8000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1022220k/1047552k available (2008k kernel code, 24936k reserved, 945k data, 296k init) Calibrating delay using timer specific routine.. 3619.52 BogoMIPS (lpj=7239044) Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12557099
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3616.43 BogoMIPS (lpj=7232876)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
Brought up 2 CPUs
migration_cost=349
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e06fffff
PCI: No mmconfig possible on device 00:18
PCI: No mmconfig possible on device 07:05
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to [email protected]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid SYN0129
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
Time: hpet clocksource has been installed.
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
pnp: match found with the PnP device '00:03' and the driver 'system'
pnp: 00:03: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: match found with the PnP device '00:04' and the driver 'system'
pnp: 00:04: ioport range 0x1000-0x107f has been reserved
pnp: 00:04: ioport range 0x1080-0x10ff has been reserved
pnp: 00:04: ioport range 0x1400-0x147f has been reserved
pnp: 00:04: ioport range 0x1480-0x14ff has been reserved
pnp: 00:04: ioport range 0x1800-0x187f has been reserved
pnp: 00:04: ioport range 0x1880-0x18ff has been reserved
pnp: 00:04: ioport range 0x2000-0x203f has been reserved
pnp: match found with the PnP device '00:05' and the driver 'system'
# dmidecode 2.9 SMBIOS 2.4 present. 20 structures occupying 822 bytes. Table at 0x000F1C80.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Hewlett-Packard
Version: F.3A
Release Date: 07/19/2007
Address: 0xE6A30
Runtime Size: 103888 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported Selectable boot is supported
Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported
USB legacy is supported
AGP is supported
Smart battery is supported
BIOS boot specification is supported Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Hewlett-Packard
Product Name: HP Pavilion dv6000 (EX991AV#ABA)
Version: Rev 1
Serial Number: CNF7044XGT
UUID: 434E4637-3034-3458-4754-001636E6C962 Wake-up Type: Power Switch
SKU Number: EX991AV#ABA
Family: 103C_5335KV
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Quanta
Product Name: 30B8
Version: 65.28
Serial Number: None
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Quanta
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket S1
Type: Central Processor
Family: Opteron
Manufacturer: AMD
ID: 82 0F 04 00 FF FB 8B 17
Signature: Family 15, Model 72, Stepping 2 Flags:
FPU (Floating-point unit on-chip) VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension) MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call)
MTRR (Memory type range registers) PGE (Page global enable)
MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table)
PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported)
FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Hyper-threading technology)
Version: AMD Turion(tm) 64 X2 Mobile TL56
Voltage: 1.6 V
External Clock: 200 MHz
Max Speed: 1800 MHz
Current Speed: 1800 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Through
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: Unknown
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot 1
Type: 64-bit PCI Express
Current Usage: Available
Length: Short
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0008, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot 2
Type: 64-bit PCI Express
Current Usage: Available
Length: Short
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x0009, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description:
Handle 0x000A, DMI type 11, 5 bytes
OEM Strings
String 1: $HP$ String 2: LOC#
Handle 0x000B, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000001
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x000C, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: DIMM 1
Bank Locator: Bank 0,1
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: DA00000000000000
Serial Number: 00000111
Asset Tag: Not Specified
Part Number: HYMP564S64CP6-Y5
Handle 0x000E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: DIMM 2
Bank Locator: Bank 2,3
Type: DDR2
Type Detail: Unknown
Speed: 667 MHz (1.5 ns)
Manufacturer: DA00000000000000
Serial Number: 000007D0
Asset Tag: Not Specified
Part Number: HYMP564S64CP6-Y5
Handle 0x000F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x000C Partition Width: 0
Handle 0x0010, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x000D Memory Array Mapped Address Handle: 0x000F Partition Row Position: 2 Interleave Position: 2 Interleaved Data Depth: 2
Handle 0x0011, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000 Ending Address: 0x0003FFFFFFF Range Size: 512 MB Physical Device Handle: 0x000E Memory Array Mapped Address Handle: 0x000F Partition Row Position: 2 Interleave Position: 2 Interleaved Data Depth: 2
Handle 0x0012, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0013, DMI type 127, 4 bytes
End Of Table