KVM: PIT: support mode 4

The in-kernel PIT emulation ignores pending timers if operating under mode 4, which for example DragonFlyBSD uses (and Plan9 too, apparently).

Mode 4 seems to be similar to one-shot mode, other than the fact that it starts counting after the next CLK pulse once programmed, while mode 1 starts counting immediately, so add a FIXME to enhance precision.

Fixes https://sourceforge.net/tracker/?func=detail&atid=893831&aid=1952988&group_id=180599

index 908520c..1646102 100644
@@ -288,6 +288,8 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 	 * mode 1 is one shot, mode 2 is period, otherwise del timer */
 	switch (ps->channels[0].mode) {
 	case 1:
+        /* FIXME: enhance mode 4 precision */
+	case 4:
 		create_pit_timer(&ps->pit_timer, val, 0);
 		break;
 	case 2:

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone

Applied, thanks.

Any sufficiently difficult bug is indistinguishable from a feature.


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone