Skip to contentSkip to conversation

Lost Sound from 2.6.24 to 2.6.25 -- CS4236 ISA

DISCUSSION Pete Clements 3 participants 7 messages May 5, 2008 – May 7, 2008

lore
Share & tools
lore
#0 lore raw

Looks like sound card stops functioning between
2.6.24 and 2.6.25. Sorry but don't know at what
point. Card is an isa CS4236. Glad to provide
any other info/testing.

Signature · 1 line
Pete Clements 
#1 lore raw

At Mon, 5 May 2008 10:06:51 -0400 (EDT),

Quoted 3 lines · Pete Clements

Looks like sound card stops functioning between
2.6.24 and 2.6.25.

Could you elaborate what do you mean exactly "stop"? Fail to load or initialize the driver, or silent output, DMA error...?

Quoted 3 lines

Sorry but don't know at what
point. Card is an isa CS4236. Glad to provide
any other info/testing.

Any relevant kernel messages are welcome. Also, if you passed any (module) options for the sound driver, show it, too.

The biggest change in ISA sound driver codes between 2.6.24 and 2.6.25 is that we dropped the PnP resource re-configuration via module options of sound drivers. They have to be adjusted via sysfs now (if really needed).

Otherwise, if it really worked on 2.6.24, we have a good chance to identify the affecting changeset via bisect. There are only a few changes for sound/isa.

thanks,

Takashi

#2 lore raw
Quoted 15 lines · Takashi Iwai

At Mon, 5 May 2008 10:06:51 -0400 (EDT),

Quoted 2 lines · Pete Clements

Looks like sound card stops functioning between
2.6.24 and 2.6.25.

Could you elaborate what do you mean exactly "stop"? Fail to load or initialize the driver, or silent output, DMA error...?

Quoted 3 lines

Sorry but don't know at what
point. Card is an isa CS4236. Glad to provide
any other info/testing.

Any relevant kernel messages are welcome. Also, if you passed any (module) options for the sound driver, show it, too.

Quoted 7 lines

The biggest change in ISA sound driver codes between 2.6.24 and 2.6.25 is that we dropped the PnP resource re-configuration via module
options of sound drivers. They have to be adjusted via sysfs now (if really needed).

Otherwise, if it really worked on 2.6.24, we have a good chance to identify the affecting changeset via bisect. There are only a few changes for sound/isa.

For what it's worth and as a preliminary comment, snd-cs4236 is my main test driver and works fine for me.

Rene.

#3 lore raw
In reply to Takashi Iwai

Quoting Takashi Iwai

Quoted 26 lines

At Mon, 5 May 2008 10:06:51 -0400 (EDT),

Quoted 3 lines · Pete Clements

Looks like sound card stops functioning between
2.6.24 and 2.6.25.

Could you elaborate what do you mean exactly "stop"? Fail to load or initialize the driver, or silent output, DMA error...?

Quoted 3 lines

Sorry but don't know at what
point. Card is an isa CS4236. Glad to provide
any other info/testing.

Any relevant kernel messages are welcome. Also, if you passed any (module) options for the sound driver, show it, too.

The biggest change in ISA sound driver codes between 2.6.24 and 2.6.25 is that we dropped the PnP resource re-configuration via module options of sound drivers. They have to be adjusted via sysfs now (if really needed).

Otherwise, if it really worked on 2.6.24, we have a good chance to identify the affecting changeset via bisect. There are only a few changes for sound/isa.

Quoted 4 lines

thanks,

Takashi
--

All I get is a cyclic noise burst (about 500ms frequency). No options to module load, prior to 25 manually loaded modules with 'modprobe snd-cs4236', with 25+ modules auto load at boot.

By removing "CONFIG_PNPBIOS" get total silence. So would assume the PNP change the source.

Currently running 26-rc1-git4.

-
Pete Clements

#4 lore raw
Quoted 26 lines · Pete Clements

Quoting Takashi Iwai

Quoted 16 lines

At Mon, 5 May 2008 10:06:51 -0400 (EDT),

Quoted 3 lines · Pete Clements

Looks like sound card stops functioning between
2.6.24 and 2.6.25.

Could you elaborate what do you mean exactly "stop"? Fail to load or initialize the driver, or silent output, DMA error...?

Quoted 3 lines

Sorry but don't know at what
point. Card is an isa CS4236. Glad to provide
any other info/testing.

Any relevant kernel messages are welcome. Also, if you passed any (module) options for the sound driver, show it, too.

Quoted 8 lines

The biggest change in ISA sound driver codes between 2.6.24 and 2.6.25 is that we dropped the PnP resource re-configuration via module options of sound drivers. They have to be adjusted via sysfs now (if really needed).

Otherwise, if it really worked on 2.6.24, we have a good chance to identify the affecting changeset via bisect. There are only a few changes for sound/isa.

Quoted 7 lines

All I get is a cyclic noise burst (about 500ms frequency). No options to module load, prior to 25 manually loaded modules with 'modprobe snd-cs4236', with 25+ modules auto load at boot.

By removing "CONFIG_PNPBIOS" get total silence. So would assume the PNP change the source.

Currently running 26-rc1-git4.

There have been quite a few post .25 changes to PnP. Is there a difference between .24 and .25 or between .24/.25 on the one hand and .26-rc1-git4 on the other?

Also, does using PNPACPI instead of PNPBIOS change anything?

Rene.

#5 lore raw

Quoting Rene Herman

Quoted 5 lines

There have been quite a few post .25 changes to PnP. Is there a difference between .24 and .25 or between .24/.25 on the one hand and .26-rc1-git4 on the other?

Quoted 9 lines

Also, does using PNPACPI instead of PNPBIOS change anything?

Rene.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Had a cold reboot today, now 2.6.25 is working just like 2.6.24. Have rebooted in and out of 25 multi time and all is fine. Nothing changed to my knowledge so I can't explain, must have had something screwed up.

Problem does exist post 2.6.25, except just silence. Did manage to get the cyclic noise back after removing pnp, failing a module load, and adding pnp back with warm reboots.

System will not configure PNPACPI.

Signature · 1 line
Pete Clements 
#6 lore raw
Quoted 9 lines · Pete Clements

Had a cold reboot today, now 2.6.25 is working just like 2.6.24. Have rebooted in and out of 25 multi time and all is fine. Nothing changed to my knowledge so I can't explain, must have had something screwed up.

Problem does exist post 2.6.25, except just silence. Did manage to get the cyclic noise back after removing pnp, failing a module load, and adding pnp back with warm reboots.

System will not configure PNPACPI.

Okay, thanks. Reproduced the silence (with a different ISAPnP soundcard, the AD1815). Will debug later today.

That "cyclic noise" thing is odd but I expect that's simply a side effect of the chip not initializing itself so that some connections are kept floating.

Rene.