[linux-dvb] [Fwd: Change wording of DIFF file please]
Repost as I think I fell off the list ;o(
You are not allowed to post to this mailing list, and your message has been automatically rejected. If you think that your messages are being rejected in error, contact the mailing list owner at [email protected].
Hello.
I just tried to compile linux-2.6.25 with the following diff file..
http://www.chrysocome.net/downloads/v4l-dvb-experimental-t750-0.2.diff
Can all the "TUNER_XCEIVE_XC3028" be changed to "TUNER_XC2028" otherwise you get build errors?
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hey,
Quoted 2 lines · Rod
Repost as I think I fell off the list ;o(
this stuff was generated against my v4l-dvb-experimental repository it seems.
+ }
+ break;
+ case TUNER_XCEIVE_XC3028:
+ dprintk(KERN_INFO "saa7134_tuner_callback TUNER_XCEIVE_XC3028
command %d\n", command);
+ switch(command) {
+ case TUNER_RESET1:
+ case TUNER_RESET2:
+ /* this seems to be to correct bit */
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+ break;
+
+ case TUNER_RESET3:
+ break;
this also needs a change to work with the linuxtv repository, that way the patch is not compatible with the linuxtv.org repository it was generated against my v4l-dvb-experimental repository.
You already have the xceive reset line bit. Look how other xc3028 reset callbacks are implemented into the linuxtv.org repository and change this according to the other callbacks.
Markus
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 30 lines · Markus Rechberger
Hey,
Quoted 3 lines · Rod
Repost as I think I fell off the list ;o(this stuff was generated against my v4l-dvb-experimental repository it seems.
(quoted diff) +4
-0+ } + break; + case TUNER_XCEIVE_XC3028: + dprintk(KERN_INFO "saa7134_tuner_callback TUNER_XCEIVE_XC3028command %d\n", command);
(quoted diff) +10
-0+ switch(command) { + case TUNER_RESET1: + case TUNER_RESET2: + /* this seems to be to correct bit */ + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000); + break; + + case TUNER_RESET3: + break;this also needs a change to work with the linuxtv repository, that way the patch is not compatible with the linuxtv.org repository it was generated against my v4l-dvb-experimental repository.
Quoted 6 lines
You already have the xceive reset line bit. Look how other xc3028 reset callbacks are implemented into the linuxtv.org repository and change this according to the other callbacks.
Markus
Would I be able to get a little help with this please?
I know I may be asking a bit much, but I'm trying to learn this
stuff at the same time ;o)
Does the code already work in 2.6.25? or its only in V4L repos
building before submission into the linux tree?
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb