SLUB: clear c->freelist in __slab_alloc()/load_freelist:/SlabDebug path
Subsystems (2)
PATCH 1/1 SLUB: clear c->freelist in __slab_alloc()/load_freelist:/SlabDebug path
In the __slab_alloc()/load_freelist:/SlabDebug(c->page) path we only use the object at the head of c->page->freelist
and the tail goes back to c->page->freelist.
We then set c->node = -1 to force __slab_alloc in next allocation. c->freelist therefore needs to be cleared as it is invalid at this point.
--- mm/slub.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
Hit while running cthon04 test from an IBM AIX client against my nfs41 tree.
Stack trace excerpt:
May 12 11:18:19 client kernel: general protection fault: 0000 [2] SMP May 12 11:18:19 client kernel: CPU 3 May 12 11:18:19 client kernel: Modules linked in: panfs(P) nfsd auth_rpcgss exportfs autofs4 hidp nfs lockd nfs_acl fuse rfcomm l2cap bluetooth sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 dm_multipath video output sbs sbshc battery ac e1000e i5000_edac iTCO_wdt iTCO_vendor_support i2c_i801 edac_core button sr_mod pcspkr i2c_core sg cdrom floppy dm_snapshot dm_zero dm_mirror dm_mod ata_piix libata shpchp pci_hotplug mptsas mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode] May 12 11:18:19 client kernel: Pid: 2815, comm: nfsd Tainted: P D 2.6.25-nfs41 #2 May 12 11:18:19 client kernel: RIP: 0010:[<ffffffff8108c0c8>] [<ffffffff8108c0c8>] kmem_cache_alloc+0x3d/0x65 May 12 11:18:19 client kernel: RSP: 0018:ffff8104212c3de0 EFLAGS: 00010006 May 12 11:18:19 client kernel: RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff883546df May 12 11:18:19 client kernel: RDX: 3200100010100000 RSI: 00000000000080d0 RDI: ffffffff813eadb8 May 12 11:18:19 client kernel: RBP: ffff810001029e60 R08: 0000000000000000 R09: ffff8103f118d130 May 12 11:18:19 client kernel: R10: ffff81041b076018 R11: ffffffff8826c313 R12: 00000000000080d0 May 12 11:18:19 client kernel: R13: ffff8104211aa000 R14: ffff81041b076000 R15: ffff8104239c8000 May 12 11:18:19 client kernel: FS: 00007f08fb8626f0(0000) GS:ffff81042fc02e80(0000) knlGS:0000000000000000 May 12 11:18:19 client kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b May 12 11:18:19 client kernel: CR2: 00007fdaf41cf030 CR3: 0000000420827000 CR4: 00000000000006e0 May 12 11:18:19 client kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 May 12 11:18:19 client kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 May 12 11:18:19 client kernel: Process nfsd (pid: 2815, threadinfo ffff8104212c2000, task ffff81042381c940) May 12 11:18:19 client kernel: Stack: ffff8104211ab000 ffff8103f118d000 0000000022270000 ffffffff883546df May 12 11:18:19 client kernel: ffffffff88373cb8 0000000000000000 ffff8103f118d130 ffff8104239c8000 May 12 11:18:19 client kernel: ffffffff88373cb8 000000000000001c ffff81041b076018 ffff81041b076000 May 12 11:18:19 client kernel: Call Trace: May 12 11:18:19 client kernel: [<ffffffff883546df>] ? :nfsd:nfsd4_proc_compound+0xa9/0x3f6 May 12 11:18:19 client kernel: [<ffffffff88346245>] ? :nfsd:nfsd_dispatch+0xde/0x1b6 May 12 11:18:19 client kernel: [<ffffffff88268bb7>] ? :sunrpc:svc_process_common+0x2e8/0x5a9 May 12 11:18:19 client kernel: [<ffffffff8834667c>] ? :nfsd:nfsd+0x0/0x2b4 May 12 11:18:19 client kernel: [<ffffffff88269d16>] ? :sunrpc:svc_process+0x127/0x13d May 12 11:18:19 client kernel: [<ffffffff88346819>] ? :nfsd:nfsd+0x19d/0x2b4May 12 11:18:19 client kernel: [<ffffffff8100cac8>] ? child_rip+0xa/0x12 May 12 11:18:19 client kernel: [<ffffffff8834667c>] ? :nfsd:nfsd+0x0/0x2b4 May 12 11:18:19 client last message repeated 2 times May 12 11:18:19 client kernel: [<ffffffff8100cabe>] ? child_rip+0x0/0x12 May 12 11:18:19 client kernel: May 12 11:18:19 client kernel: May 12 11:18:19 client kernel: Code: 25 24 00 00 00 48 98 48 8b ac c7 d8 02 00 00 48 8b 55 00 48 85 d2 75 10 83 ca ff 49 89 e8 e8 7e f8 ff ff 48 89 c2 eb 0b 8b 45 14 <48> 8b 04 c2 48 89 45 00 53 9d 66 45 85 e4 79 10 48 85 d2 74 0b May 12 11:18:19 client kernel: RIP [<ffffffff8108c0c8>] kmem_cache_alloc+0x3d/0x65 May 12 11:18:19 client kernel: RSP <ffff8104212c3de0> May 12 11:18:19 client kernel: ---[ end trace 9b6f5806f68a2b8c ]---
$ grep SL.B .config CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set
mm/slub.c +1 -0
@@ -1606,6 +1606,7 @@ debug:if (!alloc_debug_processing (s, c->page, object, addr)) goto another_slab; + c->freelist =NULL ; c->page->inuse++; c->page->freelist = object[c->offset]; c->node =-1 ;
Signature · 1 line
1.5.3.3
Quoted 6 lines · Benny Halevy
In the __slab_alloc()/load_freelist:/SlabDebug(c->page) path we only
use the object at the head ofc->page->freelist
and the tail goes back toc->page->freelist.
We then setc->node= -1 to force__slab_allocin next allocation.c->freelisttherefore needs to be cleared as it is invalid at this point.
Quoted 8 lines
@@ -1606,6 +1606,7 @@ debug:
if (!alloc_debug_processing(s, c->page, object, addr)) goto another_slab;+ c->freelist = NULL; c->page->inuse++; c->page->freelist = object[c->offset]; c->node = -1;
Makes sense. Christoph?
Hi Benny,
Quoted 5 lines · Benny Halevy
In the __slab_alloc()/load_freelist:/SlabDebug(c->page) path we only
use the object at the head ofc->page->freelist
and the tail goes back toc->page->freelist.
We then setc->node= -1 to force__slab_allocin next allocation.c->freelisttherefore needs to be cleared as it is invalid at this point.
But for debug pages, we never load c->page->freelist to c->freelist so it should always be NULL.
Quoted 61 lines
Signed-off-by Benny Halevy <[email protected]>---
mm/slub.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)Hit while running cthon04 test from an IBM AIX client against my nfs41 tree.
Stack trace excerpt:
May 12 11:18:19 client kernel: general protection fault: 0000 [2] SMP May 12 11:18:19 client kernel: CPU 3 May 12 11:18:19 client kernel: Modules linked in: panfs(P) nfsd auth_rpcgss exportfs autofs4 hidp nfs lockd nfs_acl fuse rfcomm l2cap bluetooth sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 dm_multipath video output sbs sbshc battery ac e1000e i5000_edac iTCO_wdt iTCO_vendor_support i2c_i801 edac_core button sr_mod pcspkr i2c_core sg cdrom floppy dm_snapshot dm_zero dm_mirror dm_mod ata_piix libata shpchp pci_hotplug mptsas mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode] May 12 11:18:19 client kernel: Pid: 2815, comm: nfsd Tainted: P D 2.6.25-nfs41 #2 May 12 11:18:19 client kernel: RIP: 0010:[<ffffffff8108c0c8>] [<ffffffff8108c0c8>] kmem_cache_alloc+0x3d/0x65 May 12 11:18:19 client kernel: RSP: 0018:ffff8104212c3de0 EFLAGS: 00010006 May 12 11:18:19 client kernel: RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff883546df May 12 11:18:19 client kernel: RDX: 3200100010100000 RSI: 00000000000080d0 RDI: ffffffff813eadb8 May 12 11:18:19 client kernel: RBP: ffff810001029e60 R08: 0000000000000000 R09: ffff8103f118d130 May 12 11:18:19 client kernel: R10: ffff81041b076018 R11: ffffffff8826c313 R12: 00000000000080d0 May 12 11:18:19 client kernel: R13: ffff8104211aa000 R14: ffff81041b076000 R15: ffff8104239c8000 May 12 11:18:19 client kernel: FS: 00007f08fb8626f0(0000) GS:ffff81042fc02e80(0000) knlGS:0000000000000000 May 12 11:18:19 client kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b May 12 11:18:19 client kernel: CR2: 00007fdaf41cf030 CR3: 0000000420827000 CR4: 00000000000006e0 May 12 11:18:19 client kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 May 12 11:18:19 client kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 May 12 11:18:19 client kernel: Process nfsd (pid: 2815, threadinfo ffff8104212c2000, task ffff81042381c940) May 12 11:18:19 client kernel: Stack: ffff8104211ab000 ffff8103f118d000 0000000022270000 ffffffff883546df May 12 11:18:19 client kernel: ffffffff88373cb8 0000000000000000 ffff8103f118d130 ffff8104239c8000 May 12 11:18:19 client kernel: ffffffff88373cb8 000000000000001c ffff81041b076018 ffff81041b076000 May 12 11:18:19 client kernel: Call Trace: May 12 11:18:19 client kernel: [<ffffffff883546df>] ? :nfsd:nfsd4_proc_compound+0xa9/0x3f6 May 12 11:18:19 client kernel: [<ffffffff88346245>] ? :nfsd:nfsd_dispatch+0xde/0x1b6 May 12 11:18:19 client kernel: [<ffffffff88268bb7>] ? :sunrpc:svc_process_common+0x2e8/0x5a9 May 12 11:18:19 client kernel: [<ffffffff8834667c>] ? :nfsd:nfsd+0x0/0x2b4 May 12 11:18:19 client kernel: [<ffffffff88269d16>] ? :sunrpc:svc_process+0x127/0x13d May 12 11:18:19 client kernel: [<ffffffff88346819>] ? :nfsd:nfsd+0x19d/0x2b4May 12 11:18:19 client kernel: [<ffffffff8100cac8>] ? child_rip+0xa/0x12 May 12 11:18:19 client kernel: [<ffffffff8834667c>] ? :nfsd:nfsd+0x0/0x2b4 May 12 11:18:19 client last message repeated 2 times May 12 11:18:19 client kernel: [<ffffffff8100cabe>] ? child_rip+0x0/0x12 May 12 11:18:19 client kernel: May 12 11:18:19 client kernel: May 12 11:18:19 client kernel: Code: 25 24 00 00 00 48 98 48 8b ac c7 d8 02 00 00 48 8b 55 00 48 85 d2 75 10 83 ca ff 49 89 e8 e8 7e f8 ff ff 48 89 c2 eb 0b 8b 45 14 <48> 8b 04 c2 48 89 45 00 53 9d 66 45 85 e4 79 10 48 85 d2 74 0b May 12 11:18:19 client kernel: RIP [<ffffffff8108c0c8>] kmem_cache_alloc+0x3d/0x65 May 12 11:18:19 client kernel: RSP <ffff8104212c3de0> May 12 11:18:19 client kernel: ---[ end trace 9b6f5806f68a2b8c ]---$ grep SL.B .config CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not setdiff --git
a/mm/slub.cb/mm/slub.c
index a505a82..0d1d820 100644
---a/mm/slub.c
+++b/mm/slub.c
@@ -1606,6 +1606,7 @@ debug:
Quoted 7 lines
if (!alloc_debug_processing(s, c->page, object, addr)) goto another_slab;+ c->freelist = NULL; c->page->inuse++; c->page->freelist = object[c->offset]; c->node = -1;
Looking at this, we're oopsing at:
0: 48 8b 04 c2 mov (%rdx,%rax,8),%rax
where rdx is c->freelist and rax c->offset. The the value for c->freelist ("3200100010100000") doesn't make much sense. Furthermore, we never if this really were a bug in __slab_alloc() shouldn't we be hitting it more often?
How did you make SLUB hit the debug path since you have CONFIG_SLUB_DEBUG_ON disabled?
Pekka
Quoted 11 lines · Pekka Enberg
Hi Benny,
Quoted 5 lines · Benny Halevy
In the __slab_alloc()/load_freelist:/SlabDebug(c->page) path we only
use the object at the head ofc->page->freelist
and the tail goes back toc->page->freelist.
We then setc->node= -1 to force__slab_allocin next allocation.c->freelisttherefore needs to be cleared as it is invalid at this point.But for debug pages, we never load
c->page->freelisttoc->freelistso it should always be NULL.
Hmm, I see. Then it might have got corrupted...
I'll keep looking for the root cause.
Benny
Quoted 83 lines
Quoted 62 lines
Signed-off-by Benny Halevy <[email protected]>---
mm/slub.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)Hit while running cthon04 test from an IBM AIX client against my nfs41 tree.
Stack trace excerpt:
May 12 11:18:19 client kernel: general protection fault: 0000 [2] SMP May 12 11:18:19 client kernel: CPU 3 May 12 11:18:19 client kernel: Modules linked in: panfs(P) nfsd auth_rpcgss exportfs autofs4 hidp nfs lockd nfs_acl fuse rfcomm l2cap bluetooth sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 dm_multipath video output sbs sbshc battery ac e1000e i5000_edac iTCO_wdt iTCO_vendor_support i2c_i801 edac_core button sr_mod pcspkr i2c_core sg cdrom floppy dm_snapshot dm_zero dm_mirror dm_mod ata_piix libata shpchp pci_hotplug mptsas mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode] May 12 11:18:19 client kernel: Pid: 2815, comm: nfsd Tainted: P D 2.6.25-nfs41 #2 May 12 11:18:19 client kernel: RIP: 0010:[<ffffffff8108c0c8>] [<ffffffff8108c0c8>] kmem_cache_alloc+0x3d/0x65 May 12 11:18:19 client kernel: RSP: 0018:ffff8104212c3de0 EFLAGS: 00010006 May 12 11:18:19 client kernel: RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff883546df May 12 11:18:19 client kernel: RDX: 3200100010100000 RSI: 00000000000080d0 RDI: ffffffff813eadb8 May 12 11:18:19 client kernel: RBP: ffff810001029e60 R08: 0000000000000000 R09: ffff8103f118d130 May 12 11:18:19 client kernel: R10: ffff81041b076018 R11: ffffffff8826c313 R12: 00000000000080d0 May 12 11:18:19 client kernel: R13: ffff8104211aa000 R14: ffff81041b076000 R15: ffff8104239c8000 May 12 11:18:19 client kernel: FS: 00007f08fb8626f0(0000) GS:ffff81042fc02e80(0000) knlGS:0000000000000000 May 12 11:18:19 client kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b May 12 11:18:19 client kernel: CR2: 00007fdaf41cf030 CR3: 0000000420827000 CR4: 00000000000006e0 May 12 11:18:19 client kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 May 12 11:18:19 client kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 May 12 11:18:19 client kernel: Process nfsd (pid: 2815, threadinfo ffff8104212c2000, task ffff81042381c940) May 12 11:18:19 client kernel: Stack: ffff8104211ab000 ffff8103f118d000 0000000022270000 ffffffff883546df May 12 11:18:19 client kernel: ffffffff88373cb8 0000000000000000 ffff8103f118d130 ffff8104239c8000 May 12 11:18:19 client kernel: ffffffff88373cb8 000000000000001c ffff81041b076018 ffff81041b076000 May 12 11:18:19 client kernel: Call Trace: May 12 11:18:19 client kernel: [<ffffffff883546df>] ? :nfsd:nfsd4_proc_compound+0xa9/0x3f6 May 12 11:18:19 client kernel: [<ffffffff88346245>] ? :nfsd:nfsd_dispatch+0xde/0x1b6 May 12 11:18:19 client kernel: [<ffffffff88268bb7>] ? :sunrpc:svc_process_common+0x2e8/0x5a9 May 12 11:18:19 client kernel: [<ffffffff8834667c>] ? :nfsd:nfsd+0x0/0x2b4 May 12 11:18:19 client kernel: [<ffffffff88269d16>] ? :sunrpc:svc_process+0x127/0x13d May 12 11:18:19 client kernel: [<ffffffff88346819>] ? :nfsd:nfsd+0x19d/0x2b4May 12 11:18:19 client kernel: [<ffffffff8100cac8>] ? child_rip+0xa/0x12 May 12 11:18:19 client kernel: [<ffffffff8834667c>] ? :nfsd:nfsd+0x0/0x2b4 May 12 11:18:19 client last message repeated 2 times May 12 11:18:19 client kernel: [<ffffffff8100cabe>] ? child_rip+0x0/0x12 May 12 11:18:19 client kernel: May 12 11:18:19 client kernel: May 12 11:18:19 client kernel: Code: 25 24 00 00 00 48 98 48 8b ac c7 d8 02 00 00 48 8b 55 00 48 85 d2 75 10 83 ca ff 49 89 e8 e8 7e f8 ff ff 48 89 c2 eb 0b 8b 45 14 <48> 8b 04 c2 48 89 45 00 53 9d 66 45 85 e4 79 10 48 85 d2 74 0b May 12 11:18:19 client kernel: RIP [<ffffffff8108c0c8>] kmem_cache_alloc+0x3d/0x65 May 12 11:18:19 client kernel: RSP <ffff8104212c3de0> May 12 11:18:19 client kernel: ---[ end trace 9b6f5806f68a2b8c ]---$ grep SL.B .config CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLABINFO=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not setdiff --git
a/mm/slub.cb/mm/slub.c
index a505a82..0d1d820 100644
---a/mm/slub.c
+++b/mm/slub.c
@@ -1606,6 +1606,7 @@ debug:Quoted 7 lines
if (!alloc_debug_processing(s, c->page, object, addr)) goto another_slab;+ c->freelist = NULL; c->page->inuse++; c->page->freelist = object[c->offset]; c->node = -1;Looking at this, we're oopsing at:
0: 48 8b 04 c2 mov (%rdx,%rax,8),%raxwhere rdx is
c->freelistand raxc->offset. The the value forc->freelist("3200100010100000") doesn't make much sense. Furthermore, we never if this really were a bug in__slab_alloc()shouldn't we be hitting it more often?How did you make SLUB hit the debug path since you have
CONFIG_SLUB_DEBUG_ONdisabled?Pekka
Quoted 5 lines · Benny Halevy
Quoted 2 lines
But for debug pages, we never load
c->page->freelisttoc->freelistso it should always be NULL.Hmm, I see. Then it might have got corrupted...
I'll keep looking for the root cause.
Correct.
Quoted 2 lines
Quoted 2 lines
How did you make SLUB hit the debug path since you have
CONFIG_SLUB_DEBUG_ONdisabled?
I guess he passed slub_debug on the kernel command line.
Quoted 8 lines · Christoph Lameter
Quoted 4 lines · Benny Halevy
Quoted 2 lines
But for debug pages, we never load
c->page->freelisttoc->freelistso it should always be NULL.Hmm, I see. Then it might have got corrupted...
I'll keep looking for the root cause.Correct.
Yeah, I've moved to SLAB and the mem corruption now pops up at a different place.
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
How did you make SLUB hit the debug path since you have
CONFIG_SLUB_DEBUG_ONdisabled?I guess he passed
slub_debugon the kernel command line.
I did not.
I probably have misunderstood how the slub debugging infrastructure works and did not execute the debug path at all.
Thanks for your help!
Benny
Quoted 2 lines · Benny Halevy
I probably have misunderstood how the slub debugging infrastructure works and did not execute the debug path at all.
Ahh.. So for some reason you set PG_error on a slab page which caused it to go into the debug path? Doing I/O on slab objects?