Add Marvell 88E1118 support for TSEC

Add Marvell 88E1118 support for TSEC

---
 drivers/net/tsec.c |   31
+++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)

index c7af930..397ae71 100644
@@ -1128,6 +1128,36 @@ struct phy_info

phy_info_M88E1111S = {
},
};

+struct phy_info phy_info_M88E1118 = {
+ 0x01410e1,
+ "Marvell 88E1118",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x16, 0x0002, NULL}, /* Change Page Number */
+ {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ {0x16, 0x0000, NULL}, /* Change Page Number */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
static unsigned int m88e1145_setmode(uint mii_reg,
struct tsec_private *priv)
{
uint mii_data = read_phy_reg(priv, mii_reg);
@@ -1492,6 +1522,7 @@ struct phy_info *phy_info[] = {
&phy_info_BCM5464S, &phy_info_M88E1011S, &phy_info_M88E1111S,
+ &phy_info_M88E1118,
&phy_info_M88E1145, &phy_info_M88E1149S, &phy_info_dm9161,

1.5.5.1