Fix several spelling bugs
PATCH 1/1 Fix several spelling bugs
This patch fixes several spelling bugs:
explicitely -> explicitly
stabalized -> stabilized
priveledged -> privileged
privledge,priledge -> privilege
shoud -> should
Please apply it to Qemu trunk.
Regards
Stefan
qemu.h +1 -1
@@ -386,7 +386,7 @@ }/* Unlock an area of guest memory. The first LEN bytes must be -flushed back to guest memory. host_ptr = NULL is explicitely +flushed back to guest memory. host_ptr = NULL is explicitly allowed and does nothing. */ static inline void unlock_user (void *host_ptr,abi_ulong guest_addr,long len)
path.c +1 -1
@@ -82,7 +82,7 @@return root; } -/* This needs to be done after tree is stabalized (ie. no more reallocs!). */ +/* This needs to be done after tree is stabilized (ie. no more reallocs!). */ static void set_parents (struct pathelem *child,struct pathelem *parent) {unsigned int i;
translate.c +1 -1
@@ -287,7 +287,7 @@ typedef struct opcode_t { unsigned char opc1, opc2, opc3; -#if HOST_LONG_BITS == 64 /* Explicitely align to 64 bits */ +#if HOST_LONG_BITS == 64 /* Explicitly align to 64 bits */ unsigned char pad[5]; #else unsigned char pad[1];
qemu-tech.texi +2 -2
@@ -277,7 +277,7 @@ qemu-fast system emulator. It requires a patched Linux kernel to work (you cannot launch the same kernel on your PC), but the patches are really small. As it is a PC virtualizer (no emulation is done except -for some priveledged instructions), it has the potential of being +for some privileged instructions), it has the potential of being faster than QEMU. The downside is that a complicated (and potentially unsafe) host kernel patch is needed.
@@ -334,7 +334,7 @@ result (called @code{CC_DST}) and the type of operation (called @code{CC_OP}). -@code{CC_OP} is almost never explicitely set in the generated code +@code{CC_OP} is almost never explicitly set in the generated code because it is known at translation time. In order to increase performances, a backward pass is performed on the
exec-all.h +1 -1
@@ -216,7 +216,7 @@ {/* patch the branch destination */ *(uint32_t *)jmp_addr = addr - (jmp_addr +4 ); -/* no need to flush icache explicitely */ +/* no need to flush icache explicitly */ }#elif defined(__arm__)static inline void tb_set_jmp_target1 (unsigned long jmp_addr,unsigned long addr)
cpu.h +1 -1
@@ -351,7 +351,7 @@enum {CC_OP_DYNAMIC ,/* must use dynamic code to get cc_op */ -CC_OP_EFLAGS ,/* all cc are explicitely computed, CC_SRC = flags */ +CC_OP_EFLAGS ,/* all cc are explicitly computed, CC_SRC = flags */ CC_OP_MULB ,/* modify all flags, C, O = (CC_SRC != 0) */ CC_OP_MULW ,
integratorcp.c +1 -1
@@ -494,7 +494,7 @@ } ram_offset =qemu_ram_alloc (ram_size);/* ??? On a real system the first 1Mb is mapped as SSRAM or boot flash. */ -/* ??? RAM shoud repeat to fill physical memory space. */ +/* ??? RAM should repeat to fill physical memory space. */ /* SDRAM at address zero*/ cpu_register_physical_memory (0 , ram_size, ram_offset |IO_MEM_RAM );/* And again at address 0x80000000 */
versatilepb.c +1 -1
@@ -182,7 +182,7 @@fprintf (stderr,"Unable to find CPU definition\n" );exit (1 ); } -/* ??? RAM shoud repeat to fill physical memory space. */ +/* ??? RAM should repeat to fill physical memory space. */ /* SDRAM at address zero. */ cpu_register_physical_memory (0 , ram_size,IO_MEM_RAM );
scsi-disk.c +1 -1
@@ -662,7 +662,7 @@case 0x46 :DPRINTF ("Get Configuration (rt %d, maxlen %d)\n" , buf[1 ] &3 , len);memset (outbuf,0 ,8 ); -/* ??? This shoud probably return much more information. For now +/* ??? This should probably return much more information. For now just return the basic header indicating the CD-ROM profile. */ outbuf[7 ] =8 ;// CD-ROM r->buf_len =8 ;
realview.c +1 -1
@@ -64,7 +64,7 @@ } } -/* ??? RAM shoud repeat to fill physical memory space. */ +/* ??? RAM should repeat to fill physical memory space. */ /* SDRAM at address zero. */ cpu_register_physical_memory (0 , ram_size,IO_MEM_RAM );
alpha_palcode.c +1 -1
@@ -55,7 +55,7 @@ };#if 0 -/* One must explicitely check that the TB is valid and the FOE bit is reset */ +/* One must explicitly check that the TB is valid and the FOE bit is reset */ static void update_itb (void ) {/* This writes into a temp register, not the actual one */
tcg.c +1 -1
@@ -1406,7 +1406,7 @@propagation */ tcg_out_movi (s, ots->type, ots->reg, val); }else { -/* The movi is not explicitely generated here */ +/* The movi is not explicitly generated here */ if (ots->val_type ==TEMP_VAL_REG ) s->reg_to_temp[ots->reg] =-1 ; ots->val_type =TEMP_VAL_CONST ;
op_helper.c +4 -4
@@ -689,7 +689,7 @@ } dpl = (e2 >>DESC_DPL_SHIFT ) &3 ; cpl = env->hflags &HF_CPL_MASK ; -/* check privledge if software int */ +/* check privilege if software int */ if (is_int && dpl < cpl)raise_exception_err (EXCP0D_GPF , intno *8 +2 );/* check valid bit */
@@ -900,7 +900,7 @@ } dpl = (e2 >>DESC_DPL_SHIFT ) &3 ; cpl = env->hflags &HF_CPL_MASK ; -/* check privledge if software int */ +/* check privilege if software int */ if (is_int && dpl < cpl)raise_exception_err (EXCP0D_GPF , intno *16 +2 );/* check valid bit */
@@ -1166,7 +1166,7 @@ dpl = (e2 >>DESC_DPL_SHIFT ) &3 ; cpl = env->hflags &HF_CPL_MASK ; -/* check privledge if software int */ +/* check privilege if software int */ if (is_int && dpl < cpl)raise_exception_err (EXCP0D_GPF , (intno << shift) +2 );
@@ -2698,7 +2698,7 @@ sp += addend;if (rpl == cpl && (!(env->hflags &HF_CS64_MASK ) || ((env->hflags &HF_CS64_MASK ) && !is_iret))) { -/* return to same priledge level */ +/* return to same privilege level */ cpu_x86_load_seg_cache(env, R_CS, new_cs, get_seg_base(e1, e2), get_seg_limit(e1, e2),
Quoted 9 lines · Stefan Weil
This patch fixes several spelling bugs:
explicitely -> explicitly
stabalized -> stabilized
priveledged -> privileged
privledge,priledge -> privilege
shoud -> shouldPlease apply it to Qemu trunk.
Reviewed-by Anthony Liguori <[email protected]>
Regards,
Anthony Liguori
Quoted 3 lines
Regards
Stefan