Skip to contentSkip to conversation

Question on hotplug SATA controllers

DISCUSSION Peter Rabbitson 3 participants 4 messages Jun 6, 2008 – Jun 8, 2008 MD RAID

lore
Share & tools
lore
#0 lore raw

Apologies for yet another off-topic thread :)

Since there has been some discussion about not-quite-server grade hardware, I would like to ask about your experience with SATA controllers that fully support hotplug. By fully support I mean I can pull a drive, have udev register it as missing, put it back in - have the device node re-appear in /dev. To date I am not aware of any consumer grade (i.e. can be found on newegg) controller/chipset which can actually do this. Does such a card exist?

Thanks

Peter

#1 lore raw
Quoted 10 lines · Peter Rabbitson

Apologies for yet another off-topic thread :)

Since there has been some discussion about not-quite-server grade hardware, I would like to ask about your experience with SATA controllers that fully support hotplug. By fully support I mean I can pull a drive, have udev register it as missing, put it back in - have the device node re-appear in /dev. To date I am not aware of any consumer grade (i.e. can be found on newegg) controller/chipset which can actually do this. Does such a card exist?

What about the AOC-SAT2-MV8?
http://www.supermicro.com/products/accessories/addon/AOC-SAT2-MV8.cfm

It's the least expensive 8 port card I've found.

Have the drivers progressed far enough to support hotswap? It didn't work last year when I tried it, but I see there have been updates made.

#2 lore raw
Quoted 12 lines · John Bridges
Quoted 10 lines · Peter Rabbitson

Apologies for yet another off-topic thread :)

Since there has been some discussion about not-quite-server grade hardware, I would like to ask about your experience with SATA controllers that fully support hotplug. By fully support I mean I can pull a drive, have udev register it as missing, put it back in - have the device node re-appear in /dev. To date I am not aware of any consumer grade (i.e. can be found on newegg) controller/chipset which can actually do this. Does such a card exist?

Quoted 9 lines

What about the AOC-SAT2-MV8?
http://www.supermicro.com/products/accessories/addon/AOC-SAT2-MV8.cfm

It's the least expensive 8 port card I've found.

Have the drivers progressed far enough to support hotswap? It didn't work last year when I tried it, but I see there have been updates made.

I just tested it with SUSE 10.3 x64 2.6.22.17-0.1

It worked fine hot plugging a 1TB Seagate drive, both plug and unplug. So the drivers are now functional.

At under $15 per port for a 8 port card, that certainly is in the consumer grade price range.

#3 lore raw
In reply to Peter Rabbitson
Quoted 6 lines · Peter Rabbitson

Apologies for yet another off-topic thread :)

controllers that fully support hotplug. By fully support I mean I can pull a drive, have udev register it as missing, put it back in - have the device node re-appear in /dev. To date I am not aware of any consumer grade (i.e. can be found on newegg) controller/chipset which can actually do this. Does such a card exist?

Thanks

Everything intel since ich7, as well as, SIIs JMicron, Promises supports hotplug out of the box in modern linux (generally - most of the hardware working under ahci driver in your linux).