Skip to contentSkip to conversation

problem with sata_nv and SATA<>PATA bridge (2.6.18/2.6.24)

DISCUSSION Mark Paulus 2 participants 2 messages May 30, 2008 – Jun 10, 2008 libata

lore
Share & tools
lore
#0 lore raw

Hello,

I have a motherboard with Nvidia sata and
SIL3512 sata controllers. I also have a brand spanking new 320GB IDE drive that I am connecting to the mobo via a SATA<>PATA
bridge. This combo is giving me fits with
the NV controller, but seems to work fine
with the SIL sata controller.

I had this problem on 2.6.22 on the Sil side,
but Tejun found the issue and created a patch.

The action I was trying to accomplish was:
mkfs.jfs -c /dev/sdb1.

Here are the messages from my messages
file:

May 27 16:42:45 storage1 kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 177
May 27 16:42:45 storage1 kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 177
May 27 16:42:45 storage1 kernel: scsi0 : sata_nv
May 27 16:42:45 storage1 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:42:45 storage1 kernel: ata1.00: ATA-7, max UDMA/133, 321672960 sectors: LBA48 NCQ (depth 0/32)
May 27 16:42:45 storage1 kernel: ata1.00: ata1: dev 0 multi count 16
May 27 16:42:45 storage1 kernel: ata1.00: configured for UDMA/133
May 27 16:42:45 storage1 kernel: scsi1 : sata_nv
May 27 16:42:45 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:42:45 storage1 kernel: ata2.00: ATA-8, max UDMA/100, 625142448 sectors: LBA48
May 27 16:42:45 storage1 kernel: ata2.00: ata2: dev 0 multi count 16
May 27 16:42:45 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:42:45 storage1 kernel:   Vendor: ATA       Model: HDT722516DLA380   Rev: V43O
May 27 16:42:45 storage1 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
May 27 16:42:45 storage1 kernel:   Vendor: ATA       Model: WDC WD3200AAJB-0  Rev: 00.0
May 27 16:42:45 storage1 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
May 27 16:42:45 storage1 kernel: GSI 19 sharing vector 0xC9 and IRQ 19
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 201
May 27 16:42:45 storage1 kernel: skge 1.6 addr 0xf5000000 irq 201 chip Yukon-Lite rev 9
May 27 16:42:45 storage1 kernel: skge eth0: addr 00:0f:ea:85:73:1c
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
May 27 16:42:45 storage1 kernel: GSI 20 sharing vector 0xD1 and IRQ 20
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 209
May 27 16:42:45 storage1 kernel: ata3: SATA max UDMA/100 cmd 0xFFFFC2000001A080 ctl 0xFFFFC2000001A08A bmdma 0xFFFFC2000001A000 irq 209
May 27 16:42:45 storage1 kernel: ata4: SATA max UDMA/100 cmd 0xFFFFC2000001A0C0 ctl 0xFFFFC2000001A0CA bmdma 0xFFFFC2000001A008 irq 209
May 27 16:42:45 storage1 kernel: scsi2 : sata_sil
May 27 16:42:45 storage1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
May 27 16:42:45 storage1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 27 16:42:45 storage1 kernel: ata3: SATA link down (SStatus 0 SControl 310) May 27 16:42:45 storage1 kernel: scsi3 : sata_sil
May 27 16:42:45 storage1 kernel: ata4: SATA link down (SStatus 0 SControl 310)
May 27 16:42:45 storage1 kernel: NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
May 27 16:42:45 storage1 kernel: NFORCE3-250: chipset revision 162
May 27 16:42:45 storage1 kernel: NFORCE3-250: not 100%% native mode: will probe irqs later
May 27 16:42:45 storage1 kernel: NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
May 27 16:42:45 storage1 kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
May 27 16:42:45 storage1 kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
May 27 16:42:45 storage1 kernel: SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
May 27 16:42:45 storage1 kernel: sda: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sda: drive cache: write back
May 27 16:42:45 storage1 kernel: SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
May 27 16:42:45 storage1 kernel: sda: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sda: drive cache: write back
May 27 16:42:45 storage1 kernel:  sda: sda1 sda2 < sda5 > sda3
May 27 16:42:45 storage1 kernel: sd 0:0:0:0: Attached scsi disk sda
May 27 16:42:45 storage1 kernel: SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
May 27 16:42:45 storage1 kernel: sdb: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:42:45 storage1 kernel: SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
May 27 16:42:45 storage1 kernel: sdb: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:42:45 storage1 kernel:  sdb: unknown partition table
May 27 16:42:45 storage1 kernel: sd 1:0:0:0: Attached scsi disk sdb
May 27 16:42:51 storage1 kernel: NFSD: starting 90-second grace period
May 27 16:47:50 storage1 kernel: ata2: EH complete
May 27 16:47:50 storage1 kernel: SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
May 27 16:47:50 storage1 kernel: sdb: Write Protect is off
May 27 16:47:50 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:47:53 storage1 kernel: SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
May 27 16:47:53 storage1 kernel: sdb: Write Protect is off
May 27 16:47:53 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:47:53 storage1 kernel:  sdb: sdb1
May 27 16:49:43 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:50:06 storage1 kernel: ata2: soft resetting port
May 27 16:50:06 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:50:06 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:50:06 storage1 kernel: ata2: EH complete
May 27 16:50:43 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:51:06 storage1 kernel: ata2: soft resetting port
May 27 16:51:06 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:51:06 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:51:06 storage1 kernel: ata2: EH complete
May 27 16:51:44 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:52:07 storage1 kernel: ata2: soft resetting port
May 27 16:52:07 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:52:07 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:52:07 storage1 kernel: ata2: EH complete
May 27 16:52:37 storage1 kernel: ata2.00: limiting speed to UDMA/66
May 27 16:52:44 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:53:07 storage1 kernel: ata2: soft resetting port
May 27 16:53:07 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:53:07 storage1 kernel: ata2.00: configured for UDMA/66
May 27 16:53:07 storage1 kernel: ata2: EH complete
May 27 16:53:37 storage1 kernel: ata2.00: limiting speed to UDMA/44
May 27 16:53:45 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:54:08 storage1 kernel: ata2: soft resetting port
May 27 16:54:08 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:54:08 storage1 kernel: ata2.00: configured for UDMA/44
May 27 16:54:08 storage1 kernel: ata2: EH complete
May 27 16:54:38 storage1 kernel: ata2.00: limiting speed to UDMA/33
May 27 16:54:45 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:55:08 storage1 kernel: ata2: soft resetting port
May 27 16:55:08 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:55:08 storage1 kernel: ata2.00: configured for UDMA/33
May 27 16:55:08 storage1 kernel: ata2: EH complete
May 27 16:55:38 storage1 kernel: ata2.00: limiting speed to UDMA/25
May 27 16:55:46 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:56:02 storage1 shutdown[3403]: shutting down for system reboot
May 27 16:56:09 storage1 kernel: ata2: soft resetting port
May 27 16:56:09 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:56:09 storage1 kernel: ata2.00: configured for UDMA/25
May 27 16:56:09 storage1 kernel: ata2: EH complete
May 27 16:56:09 storage1 kernel: sd 1:0:0:0: SCSI error: return code = 0x08000002
May 27 16:56:09 storage1 kernel: sdb: Current: sense key: Aborted Command
May 27 16:56:09 storage1 kernel:     Additional sense: No additional sense information
May 27 16:56:09 storage1 kernel: end_request: I/O error, dev sdb, sector 76607
May 27 16:56:09 storage1 kernel: lost page write due to I/O error on sdb1
May 27 16:56:09 storage1 last message repeated 9 times
May 27 16:56:09 storage1 kernel: ata2: EH complete
May 27 16:56:09 storage1 kernel: SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
May 27 16:56:39 storage1 kernel: ata2.00: limiting speed to UDMA/16
May 27 16:56:46 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:57:09 storage1 kernel: ata2: soft resetting port
May 27 16:57:09 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:57:09 storage1 kernel: ata2.00: configured for UDMA/16
May 27 16:57:09 storage1 kernel: ata2: EH complete
May 27 16:57:39 storage1 kernel: ata2.00: limiting speed to PIO4
May 27 16:57:47 storage1 kernel: ata2: port is slow to respond, please be patient
May 27 16:58:10 storage1 kernel: ata2: soft resetting port
May 27 16:58:10 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:10 storage1 kernel: ata2.00: configured for PIO4
May 27 16:58:10 storage1 kernel: ata2: EH complete
May 27 16:58:10 storage1 kernel: ata2.00: limiting speed to PIO3
May 27 16:58:10 storage1 kernel: ata2: soft resetting port
May 27 16:58:10 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:10 storage1 kernel: ata2.00: configured for PIO3
May 27 16:58:10 storage1 kernel: ata2: EH complete
May 27 16:58:10 storage1 kernel: ata2.00: limiting speed to PIO2
May 27 16:58:11 storage1 kernel: ata2: soft resetting port
May 27 16:58:11 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:11 storage1 kernel: ata2.00: configured for PIO2
May 27 16:58:11 storage1 kernel: ata2: EH complete
May 27 16:58:11 storage1 kernel: ata2.00: limiting speed to PIO1
May 27 16:58:11 storage1 kernel: ata2: soft resetting port
May 27 16:58:11 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:11 storage1 kernel: ata2.00: configured for PIO1
May 27 16:58:11 storage1 kernel: ata2: EH complete
May 27 16:58:11 storage1 kernel: ata2.00: limiting speed to PIO0
May 27 16:58:11 storage1 kernel: ata2: soft resetting port
May 27 16:58:12 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:12 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:12 storage1 kernel: sd 1:0:0:0: SCSI error: return code = 0x08000002
May 27 16:58:12 storage1 kernel: sdb: Current: sense key: Aborted Command
May 27 16:58:12 storage1 kernel:     Additional sense: No additional sense information
May 27 16:58:12 storage1 kernel: end_request: I/O error, dev sdb, sector 625071815
May 27 16:58:12 storage1 kernel: printk: 38 messages suppressed.
May 27 16:58:12 storage1 kernel: lost page write due to I/O error on sdb1
May 27 16:58:12 storage1 last message repeated 9 times
May 27 16:58:12 storage1 kernel: ata2: EH complete
May 27 16:58:12 storage1 kernel: sdb: Write Protect is off
May 27 16:58:12 storage1 kernel: ata2: soft resetting port
May 27 16:58:12 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:12 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:12 storage1 kernel: ata2: EH complete
May 27 16:58:12 storage1 kernel: ata2: soft resetting port
May 27 16:58:13 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:13 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:13 storage1 kernel: ata2: EH complete
May 27 16:58:13 storage1 kernel: ata2: soft resetting port
May 27 16:58:13 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:13 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:13 storage1 kernel: ata2: EH complete
May 27 16:58:13 storage1 kernel: ata2: soft resetting port
May 27 16:58:14 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 27 16:58:14 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:14 storage1 kernel: ata2: EH complete
May 27 16:58:14 storage1 kernel: ata2: soft resetting port
May 27 16:58:14 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

and so on
and
so
on
ad nauseum

#1 lore raw

Cc'ing Peer Chen and quoting whole body for reference.

Can you please post the result of "lspci -nn" and which bridge are you using?

Quoted 257 lines · Mark Paulus

I have a motherboard with Nvidia sata and
SIL3512 sata controllers. I also have a brand spanking new 320GB IDE drive that I am
connecting to the mobo via a SATA<>PATA
bridge. This combo is giving me fits with
the NV controller, but seems to work fine
with the SIL sata controller.

I had this problem on 2.6.22 on the Sil side,
but Tejun found the issue and created a patch.

The action I was trying to accomplish was:
mkfs.jfs -c /dev/sdb1.

Here are the messages from my messages
file:

May 27 16:42:45 storage1 kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl
0xBF2 bmdma 0xDC00 irq 177
May 27 16:42:45 storage1 kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl
0xB72 bmdma 0xDC08 irq 177
May 27 16:42:45 storage1 kernel: scsi0 : sata_nv
May 27 16:42:45 storage1 kernel: ata1: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:42:45 storage1 kernel: ata1.00: ATA-7, max UDMA/133, 321672960
sectors: LBA48 NCQ (depth 0/32)
May 27 16:42:45 storage1 kernel: ata1.00: ata1: dev 0 multi count 16
May 27 16:42:45 storage1 kernel: ata1.00: configured for UDMA/133
May 27 16:42:45 storage1 kernel: scsi1 : sata_nv
May 27 16:42:45 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:42:45 storage1 kernel: ata2.00: ATA-8, max UDMA/100, 625142448
sectors: LBA48
May 27 16:42:45 storage1 kernel: ata2.00: ata2: dev 0 multi count 16
May 27 16:42:45 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:42:45 storage1 kernel:   Vendor: ATA       Model:
HDT722516DLA380   Rev: V43O
May 27 16:42:45 storage1 kernel:   Type:  
Direct-Access                      ANSI SCSI revision: 05
May 27 16:42:45 storage1 kernel:   Vendor: ATA       Model: WDC
WD3200AAJB-0  Rev: 00.0
May 27 16:42:45 storage1 kernel:   Type:  
Direct-Access                      ANSI SCSI revision: 05
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt Link [APC4] enabled
at IRQ 19
May 27 16:42:45 storage1 kernel: GSI 19 sharing vector 0xC9 and IRQ 19
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] ->
Link [APC4] -> GSI 19 (level, low) -> IRQ 201
May 27 16:42:45 storage1 kernel: skge 1.6 addr 0xf5000000 irq 201 chip
Yukon-Lite rev 9
May 27 16:42:45 storage1 kernel: skge eth0: addr 00:0f:ea:85:73:1c
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt Link [APC2] enabled
at IRQ 17
May 27 16:42:45 storage1 kernel: GSI 20 sharing vector 0xD1 and IRQ 20
May 27 16:42:45 storage1 kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] ->
Link [APC2] -> GSI 17 (level, low) -> IRQ 209
May 27 16:42:45 storage1 kernel: ata3: SATA max UDMA/100 cmd
0xFFFFC2000001A080 ctl 0xFFFFC2000001A08A bmdma 0xFFFFC2000001A000 irq 209
May 27 16:42:45 storage1 kernel: ata4: SATA max UDMA/100 cmd
0xFFFFC2000001A0C0 ctl 0xFFFFC2000001A0CA bmdma 0xFFFFC2000001A008 irq 209
May 27 16:42:45 storage1 kernel: scsi2 : sata_sil
May 27 16:42:45 storage1 kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
May 27 16:42:45 storage1 kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
May 27 16:42:45 storage1 kernel: ata3: SATA link down (SStatus 0
SControl 310) May 27 16:42:45 storage1 kernel: scsi3 : sata_sil
May 27 16:42:45 storage1 kernel: ata4: SATA link down (SStatus 0
SControl 310)
May 27 16:42:45 storage1 kernel: NFORCE3-250: IDE controller at PCI slot
0000:00:08.0
May 27 16:42:45 storage1 kernel: NFORCE3-250: chipset revision 162
May 27 16:42:45 storage1 kernel: NFORCE3-250: not 100%% native mode:
will probe irqs later
May 27 16:42:45 storage1 kernel: NFORCE3-250: 0000:00:08.0 (rev a2)
UDMA133 controller
May 27 16:42:45 storage1 kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:DMA
May 27 16:42:45 storage1 kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:DMA
May 27 16:42:45 storage1 kernel: SCSI device sda: 321672960 512-byte
hdwr sectors (164697 MB)
May 27 16:42:45 storage1 kernel: sda: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sda: drive cache: write back
May 27 16:42:45 storage1 kernel: SCSI device sda: 321672960 512-byte
hdwr sectors (164697 MB)
May 27 16:42:45 storage1 kernel: sda: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sda: drive cache: write back
May 27 16:42:45 storage1 kernel:  sda: sda1 sda2 < sda5 > sda3
May 27 16:42:45 storage1 kernel: sd 0:0:0:0: Attached scsi disk sda
May 27 16:42:45 storage1 kernel: SCSI device sdb: 625142448 512-byte
hdwr sectors (320073 MB)
May 27 16:42:45 storage1 kernel: sdb: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:42:45 storage1 kernel: SCSI device sdb: 625142448 512-byte
hdwr sectors (320073 MB)
May 27 16:42:45 storage1 kernel: sdb: Write Protect is off
May 27 16:42:45 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:42:45 storage1 kernel:  sdb: unknown partition table
May 27 16:42:45 storage1 kernel: sd 1:0:0:0: Attached scsi disk sdb
May 27 16:42:51 storage1 kernel: NFSD: starting 90-second grace period
May 27 16:47:50 storage1 kernel: ata2: EH complete
May 27 16:47:50 storage1 kernel: SCSI device sdb: 625142448 512-byte
hdwr sectors (320073 MB)
May 27 16:47:50 storage1 kernel: sdb: Write Protect is off
May 27 16:47:50 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:47:53 storage1 kernel: SCSI device sdb: 625142448 512-byte
hdwr sectors (320073 MB)
May 27 16:47:53 storage1 kernel: sdb: Write Protect is off
May 27 16:47:53 storage1 kernel: SCSI device sdb: drive cache: write back
May 27 16:47:53 storage1 kernel:  sdb: sdb1
May 27 16:49:43 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:50:06 storage1 kernel: ata2: soft resetting port
May 27 16:50:06 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:50:06 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:50:06 storage1 kernel: ata2: EH complete
May 27 16:50:43 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:51:06 storage1 kernel: ata2: soft resetting port
May 27 16:51:06 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:51:06 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:51:06 storage1 kernel: ata2: EH complete
May 27 16:51:44 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:52:07 storage1 kernel: ata2: soft resetting port
May 27 16:52:07 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:52:07 storage1 kernel: ata2.00: configured for UDMA/100
May 27 16:52:07 storage1 kernel: ata2: EH complete
May 27 16:52:37 storage1 kernel: ata2.00: limiting speed to UDMA/66
May 27 16:52:44 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:53:07 storage1 kernel: ata2: soft resetting port
May 27 16:53:07 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:53:07 storage1 kernel: ata2.00: configured for UDMA/66
May 27 16:53:07 storage1 kernel: ata2: EH complete
May 27 16:53:37 storage1 kernel: ata2.00: limiting speed to UDMA/44
May 27 16:53:45 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:54:08 storage1 kernel: ata2: soft resetting port
May 27 16:54:08 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:54:08 storage1 kernel: ata2.00: configured for UDMA/44
May 27 16:54:08 storage1 kernel: ata2: EH complete
May 27 16:54:38 storage1 kernel: ata2.00: limiting speed to UDMA/33
May 27 16:54:45 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:55:08 storage1 kernel: ata2: soft resetting port
May 27 16:55:08 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:55:08 storage1 kernel: ata2.00: configured for UDMA/33
May 27 16:55:08 storage1 kernel: ata2: EH complete
May 27 16:55:38 storage1 kernel: ata2.00: limiting speed to UDMA/25
May 27 16:55:46 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:56:02 storage1 shutdown[3403]: shutting down for system reboot
May 27 16:56:09 storage1 kernel: ata2: soft resetting port
May 27 16:56:09 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:56:09 storage1 kernel: ata2.00: configured for UDMA/25
May 27 16:56:09 storage1 kernel: ata2: EH complete
May 27 16:56:09 storage1 kernel: sd 1:0:0:0: SCSI error: return code =
0x08000002
May 27 16:56:09 storage1 kernel: sdb: Current: sense key: Aborted Command
May 27 16:56:09 storage1 kernel:     Additional sense: No additional
sense information
May 27 16:56:09 storage1 kernel: end_request: I/O error, dev sdb, sector
76607
May 27 16:56:09 storage1 kernel: lost page write due to I/O error on sdb1
May 27 16:56:09 storage1 last message repeated 9 times
May 27 16:56:09 storage1 kernel: ata2: EH complete
May 27 16:56:09 storage1 kernel: SCSI device sdb: 625142448 512-byte
hdwr sectors (320073 MB)
May 27 16:56:39 storage1 kernel: ata2.00: limiting speed to UDMA/16
May 27 16:56:46 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:57:09 storage1 kernel: ata2: soft resetting port
May 27 16:57:09 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:57:09 storage1 kernel: ata2.00: configured for UDMA/16
May 27 16:57:09 storage1 kernel: ata2: EH complete
May 27 16:57:39 storage1 kernel: ata2.00: limiting speed to PIO4
May 27 16:57:47 storage1 kernel: ata2: port is slow to respond, please
be patient
May 27 16:58:10 storage1 kernel: ata2: soft resetting port
May 27 16:58:10 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:10 storage1 kernel: ata2.00: configured for PIO4
May 27 16:58:10 storage1 kernel: ata2: EH complete
May 27 16:58:10 storage1 kernel: ata2.00: limiting speed to PIO3
May 27 16:58:10 storage1 kernel: ata2: soft resetting port
May 27 16:58:10 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:10 storage1 kernel: ata2.00: configured for PIO3
May 27 16:58:10 storage1 kernel: ata2: EH complete
May 27 16:58:10 storage1 kernel: ata2.00: limiting speed to PIO2
May 27 16:58:11 storage1 kernel: ata2: soft resetting port
May 27 16:58:11 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:11 storage1 kernel: ata2.00: configured for PIO2
May 27 16:58:11 storage1 kernel: ata2: EH complete
May 27 16:58:11 storage1 kernel: ata2.00: limiting speed to PIO1
May 27 16:58:11 storage1 kernel: ata2: soft resetting port
May 27 16:58:11 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:11 storage1 kernel: ata2.00: configured for PIO1
May 27 16:58:11 storage1 kernel: ata2: EH complete
May 27 16:58:11 storage1 kernel: ata2.00: limiting speed to PIO0
May 27 16:58:11 storage1 kernel: ata2: soft resetting port
May 27 16:58:12 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:12 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:12 storage1 kernel: sd 1:0:0:0: SCSI error: return code =
0x08000002
May 27 16:58:12 storage1 kernel: sdb: Current: sense key: Aborted Command
May 27 16:58:12 storage1 kernel:     Additional sense: No additional
sense information
May 27 16:58:12 storage1 kernel: end_request: I/O error, dev sdb, sector
625071815
May 27 16:58:12 storage1 kernel: printk: 38 messages suppressed.
May 27 16:58:12 storage1 kernel: lost page write due to I/O error on sdb1
May 27 16:58:12 storage1 last message repeated 9 times
May 27 16:58:12 storage1 kernel: ata2: EH complete
May 27 16:58:12 storage1 kernel: sdb: Write Protect is off
May 27 16:58:12 storage1 kernel: ata2: soft resetting port
May 27 16:58:12 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:12 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:12 storage1 kernel: ata2: EH complete
May 27 16:58:12 storage1 kernel: ata2: soft resetting port
May 27 16:58:13 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:13 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:13 storage1 kernel: ata2: EH complete
May 27 16:58:13 storage1 kernel: ata2: soft resetting port
May 27 16:58:13 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:13 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:13 storage1 kernel: ata2: EH complete
May 27 16:58:13 storage1 kernel: ata2: soft resetting port
May 27 16:58:14 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 27 16:58:14 storage1 kernel: ata2.00: configured for PIO0
May 27 16:58:14 storage1 kernel: ata2: EH complete
May 27 16:58:14 storage1 kernel: ata2: soft resetting port
May 27 16:58:14 storage1 kernel: ata2: SATA link up 1.5 Gbps (SStatus

113 SControl 300)

and so on
and
so
on
ad nauseum

Signature · 1 line
tejun