au1550-spi: proper platform driver

index 072c4a5..f44a76f 100644
@@ -26,6 +26,7 @@
 #include <linux/errno.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/resource.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/dma-mapping.h>

@@ -96,6 +97,8 @@ static dbdev_tab_t au1550_spi_mem_dbdev =
 	.dev_intpolarity	= 0
 };
 
+static int ddma_memid;	/* id to above mem dma device */
+
 static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
 
 

@@ -732,6 +735,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 {
 	struct au1550_spi *hw;
 	struct spi_master *master;
+	struct resource *r;
 	int err = 0;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));

@@ -753,76 +757,58 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 		goto err_no_pdata;
 	}
 
-	platform_set_drvdata(pdev, hw);
-
-	init_completion(&hw->master_done);
-
-	hw->bitbang.master = hw->master;
-	hw->bitbang.setup_transfer = au1550_spi_setupxfer;
-	hw->bitbang.chipselect = au1550_spi_chipsel;
-	hw->bitbang.master->setup = au1550_spi_setup;
-	hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no IRQ\n");
+		err = -ENODEV;
+		goto err_no_iores;
+	}
+	hw->irq = r->start;
+
+	hw->usedma = 0;
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (r) {
+		hw->dma_tx_id = r->start;
+		r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+		if (r) {
+			hw->dma_rx_id = r->start;
+			if (usedma && ddma_memid) {
+				if (pdev->dev.dma_mask == NULL)
+					dev_warn(&pdev->dev, "no dma mask\n");
+				else
+					hw->usedma = 1;
+			}
+		}
+	}
 
-	switch (hw->pdata->bus_num) {
-	case 0:
-		hw->irq = AU1550_PSC0_INT;
-		hw->regs = (volatile psc_spi_t *)PSC0_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC0_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC0_TX;
-		break;
-	case 1:
-		hw->irq = AU1550_PSC1_INT;
-		hw->regs = (volatile psc_spi_t *)PSC1_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC1_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC1_TX;
-		break;
-	case 2:
-		hw->irq = AU1550_PSC2_INT;
-		hw->regs = (volatile psc_spi_t *)PSC2_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC2_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC2_TX;
-		break;
-	case 3:
-		hw->irq = AU1550_PSC3_INT;
-		hw->regs = (volatile psc_spi_t *)PSC3_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC3_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC3_TX;
-		break;
-	default:
-		dev_err(&pdev->dev, "Wrong bus_num of SPI\n");
-		err = -ENOENT;
-		goto err_no_pdata;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no mmio resource\n");
+		err = -ENODEV;
+		goto err_no_iores;
 	}
 
-	if (request_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t),
+	if (request_mem_region(r->start, sizeof(psc_spi_t),
 			pdev->name) == NULL) {
 		dev_err(&pdev->dev, "Cannot reserve iomem region\n");
 		err = -ENXIO;
 		goto err_no_iores;
 	}
 
+	hw->regs = (psc_spi_t __iomem *)r->start;
+	
+	platform_set_drvdata(pdev, hw);
 
-	if (usedma) {
-		if (pdev->dev.dma_mask == NULL)
-			dev_warn(&pdev->dev, "no dma mask\n");
-		else
-			hw->usedma = 1;
-	}
+	init_completion(&hw->master_done);
 
-	if (hw->usedma) {
-		/*
-		 * create memory device with 8 bits dev_devwidth
-		 * needed for proper byte ordering to spi fifo
-		 */
-		int memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
-		if (!memid) {
-			dev_err(&pdev->dev,
-				"Cannot create dma 8 bit mem device\n");
-			err = -ENXIO;
-			goto err_dma_add_dev;
-		}
+	hw->bitbang.master = hw->master;
+	hw->bitbang.setup_transfer = au1550_spi_setupxfer;
+	hw->bitbang.chipselect = au1550_spi_chipsel;
+	hw->bitbang.master->setup = au1550_spi_setup;
+	hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
 
-		hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(memid,
+	if (hw->usedma) {
+		hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid,
 			hw->dma_tx_id, NULL, (void *)hw);
 		if (hw->dma_tx_ch == 0) {
 			dev_err(&pdev->dev,

@@ -841,7 +827,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 
 
 		hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id,
-			memid, NULL, (void *)hw);
+			ddma_memid, NULL, (void *)hw);
 		if (hw->dma_rx_ch == 0) {
 			dev_err(&pdev->dev,
 				"Cannot allocate rx dma channel\n");

@@ -874,7 +860,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 		goto err_no_irq;
 	}
 
-	master->bus_num = hw->pdata->bus_num;
+	master->bus_num = pdev->id;
 	master->num_chipselect = hw->pdata->num_chipselect;
 
 	/*

@@ -924,7 +910,7 @@ err_no_txdma_descr:
 		au1xxx_dbdma_chan_free(hw->dma_tx_ch);
 
 err_no_txdma:
-err_dma_add_dev:
+err_ioremap:
 	release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
 
 err_no_iores:

@@ -971,12 +957,24 @@ static struct platform_driver au1550_spi_drv = {
 
 static int __init au1550_spi_init(void)
 {
+	/*
+	 * create memory device with 8 bits dev_devwidth
+	 * needed for proper byte ordering to spi fifo
+	 */
+	if (usedma) {
+		ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
+		if (!ddma_memid)
+			printk(KERN_ERR "au1550-spi: cannot add memory"
+				" dbdma device\n");
+	}
 	return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe);
 }
 module_init(au1550_spi_init);
 
 static void __exit au1550_spi_exit(void)
 {
+	if (ddma_memid)
+		au1xxx_ddma_del_device(ddma_memid);
 	platform_driver_unregister(&au1550_spi_drv);
 }
 module_exit(au1550_spi_exit);

index 40e6c48..08e1958 100644
@@ -6,7 +6,6 @@
 #define _AU1550_SPI_H_
 
 struct au1550_spi_info {
-	s16 bus_num;		/* defines which PSC and IRQ to use */
 	u32 mainclk_hz;		/* main input clock frequency of PSC */
 	u16 num_chipselect;	/* number of chipselects supported */
 	void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);