Skip to contentSkip to conversation

thermal: sysfs: Simplifications of trip point attribute callbacks

PATCH In review Rafael J. Wysocki 2 participants 5 messages Dec 5, 2023 – Dec 6, 2023 Thermal

lore
Share & tools
lore

Rafael J. Wysocki

author
#0 lore raw

v4 cover thermal: sysfs: Simplifications of trip point attribute callbacks

Hi,

This is the 4th iteration of

https://lore.kernel.org/linux-pm/5754079.DvuYhMxLoT@kreacher/

The difference between it and the 3rd iteration:

https://lore.kernel.org/linux-pm/12338384.O9o76ZdvQC@kreacher/

is the lack of trip ID validation checks in the _store and _show callback routines modified by it.

Please refer to the individual patch changelogs for details.

Thanks!

author
#1 lore raw

PATCH v4 1/2 thermal: sysfs: Rework the handling of trip point updates

From: Rafael J. Wysocki <[email protected]>

Both trip_point_temp_store() and trip_point_hyst_store() use thermal_zone_set_trip() to update a given trip point, but none of them actually needs to change more than one field in struct thermal_trip representing it. However, each of them effectively calls __thermal_zone_get_trip() twice in a row for the same trip index value, once directly and once via thermal_zone_set_trip(), which is not particularly efficient, and the way in which thermal_zone_set_trip() carries out the update is not particularly straightforward.

Moreover, input processing need not be done under the thermal zone lock in any of these functions.

Rework trip_point_temp_store() and trip_point_hyst_store() to address the above, move the part of thermal_zone_set_trip() that is still useful to a new function called thermal_zone_trip_updated() and drop the rest of it.

While at it, make trip_point_hyst_store() reject negative hysteresis values.

Signed-off-by Rafael J. Wysocki <[email protected]>

---

v3 -> v4: Don't check trip_id against boundaries in trip_point_temp_store() and
trip_point_hyst_store() (Daniel).

v2 -> v3: No changes

v1 -> v2: Still check device_is_registered() under the zone lock

---
 drivers/thermal/thermal_core.h  |    2 +
 drivers/thermal/thermal_sysfs.c |   52 +++++++++++++++++++++++++++-------------
 drivers/thermal/thermal_trip.c  |   45 ++++++----------------------------
 include/linux/thermal.h         |    4 ---
 4 files changed, 47 insertions(+), 56 deletions(-)
drivers/thermal/thermal_sysfs.c +36 -16
Index: linux-pm/drivers/thermal/thermal_sysfs.c
===================================================================
@@ -120,8 +120,13 @@ trip_point_temp_store(struct device *dev
 		      const char *buf, size_t count)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	struct thermal_trip trip;
+	struct thermal_trip *trip;
 	int trip_id, ret;
+	int temp;
+
+	ret = kstrtoint(buf, 10, &temp);
+	if (ret)
+		return -EINVAL;
 
 	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip_id) != 1)
 		return -EINVAL;

@@ -133,15 +138,20 @@ trip_point_temp_store(struct device *dev
 		goto unlock;
 	}
 
-	ret = __thermal_zone_get_trip(tz, trip_id, &trip);
-	if (ret)
-		goto unlock;
+	trip = &tz->trips[trip_id];
 
-	ret = kstrtoint(buf, 10, &trip.temperature);
-	if (ret)
-		goto unlock;
+	if (temp != trip->temperature) {
+		if (tz->ops->set_trip_temp) {
+			ret = tz->ops->set_trip_temp(tz, trip_id, temp);
+			if (ret)
+				goto unlock;
+		}
+
+		trip->temperature = temp;
+
+		thermal_zone_trip_updated(tz, trip);
+	}
 
-	ret = thermal_zone_set_trip(tz, trip_id, &trip);
 unlock:
 	mutex_unlock(&tz->lock);
 	

@@ -179,8 +189,13 @@ trip_point_hyst_store(struct device *dev
 		      const char *buf, size_t count)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	struct thermal_trip trip;
+	struct thermal_trip *trip;
 	int trip_id, ret;
+	int hyst;
+
+	ret = kstrtoint(buf, 10, &hyst);
+	if (ret || hyst < 0)
+		return -EINVAL;
 
 	if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip_id) != 1)
 		return -EINVAL;

@@ -192,15 +207,20 @@ trip_point_hyst_store(struct device *dev
 		goto unlock;
 	}
 
-	ret = __thermal_zone_get_trip(tz, trip_id, &trip);
-	if (ret)
-		goto unlock;
+	trip = &tz->trips[trip_id];
 
-	ret = kstrtoint(buf, 10, &trip.hysteresis);
-	if (ret)
-		goto unlock;
+	if (hyst != trip->hysteresis) {
+		if (tz->ops->set_trip_hyst) {
+			ret = tz->ops->set_trip_hyst(tz, trip_id, hyst);
+			if (ret)
+				goto unlock;
+		}
+
+		trip->hysteresis = hyst;
+
+		thermal_zone_trip_updated(tz, trip);
+	}
 
-	ret = thermal_zone_set_trip(tz, trip_id, &trip);
 unlock:
 	mutex_unlock(&tz->lock);
drivers/thermal/thermal_core.h +2 -0
Index: linux-pm/drivers/thermal/thermal_core.h
===================================================================
@@ -124,6 +124,8 @@ int __thermal_zone_get_trip(struct therm
 			    struct thermal_trip *trip);
 int thermal_zone_trip_id(struct thermal_zone_device *tz,
 			 const struct thermal_trip *trip);
+void thermal_zone_trip_updated(struct thermal_zone_device *tz,
+			       const struct thermal_trip *trip);
 int __thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
 
 /* sysfs I/F */
drivers/thermal/thermal_trip.c +9 -36

54 lines not on this page · raw message

include/linux/thermal.h +0 -4
Index: linux-pm/include/linux/thermal.h
===================================================================
@@ -282,10 +282,6 @@ int __thermal_zone_get_trip(struct therm
 			    struct thermal_trip *trip);
 int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,
 			  struct thermal_trip *trip);
-
-int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id,
-			  const struct thermal_trip *trip);
-
 int for_each_thermal_trip(struct thermal_zone_device *tz,
 			  int (*cb)(struct thermal_trip *, void *),
 			  void *data);
Reviewed-by on v4 1/2
#2 lore raw

Re: [PATCH v4 1/2] thermal: sysfs: Rework the handling of trip point updates

Quoted 19 lines · Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Both trip_point_temp_store() and trip_point_hyst_store() use thermal_zone_set_trip() to update a given trip point, but none of them actually needs to change more than one field in struct thermal_trip representing it. However, each of them effectively calls __thermal_zone_get_trip() twice in a row for the same trip index value, once directly and once via thermal_zone_set_trip(), which is not particularly efficient, and the way in which thermal_zone_set_trip() carries out the update is not particularly straightforward.

Moreover, input processing need not be done under the thermal zone lock in any of these functions.

Rework trip_point_temp_store() and trip_point_hyst_store() to address the above, move the part of thermal_zone_set_trip() that is still useful to a new function called thermal_zone_trip_updated() and drop the rest of it.

Quoted 5 lines

While at it, make trip_point_hyst_store() reject negative hysteresis values.

Signed-off-by Rafael J. Wysocki <[email protected]>

---

Reviewed-by Daniel Lezcano <[email protected]>
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
author
#3 lore raw

PATCH v4 2/2 thermal: sysfs: Rework the reading of trip point attributes

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Rework the _show() callback functions for the trip point temperature, hysteresis and type attributes to avoid copying the values of struct thermal_trip fields that they do not use and make them carry out the same validation checks as the corresponding _store() callback functions.

No intentional functional impact.

Signed-off-by Rafael J. Wysocki <[email protected]>

---

v3 -> v4: Don't check trip_id against boundaries in the _show routines
for trip type, temperature and hysteresis (Daniel).

v2 -> v3: Drop a redundant 'ret' check at the end of trip_point_hyst_show.

v1 -> v2: Do not drop thermal zone locking from the _store() callback functions.

---
 drivers/thermal/thermal_sysfs.c |   52 +++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 27 deletions(-)
drivers/thermal/thermal_sysfs.c +25 -27
Index: linux-pm/drivers/thermal/thermal_sysfs.c
===================================================================
@@ -83,25 +83,24 @@ trip_point_type_show(struct device *dev,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	struct thermal_trip trip;
-	int trip_id, result;
+	enum thermal_trip_type type;
+	int trip_id;
 
 	if (sscanf(attr->attr.name, "trip_point_%d_type", &trip_id) != 1)
 		return -EINVAL;
 
 	mutex_lock(&tz->lock);
 
-	if (device_is_registered(dev))
-		result = __thermal_zone_get_trip(tz, trip_id, &trip);
-	else
-		result = -ENODEV;
+	if (!device_is_registered(dev)) {
+		mutex_unlock(&tz->lock);
+		return -ENODEV;
+	}
 
-	mutex_unlock(&tz->lock);
+	type = tz->trips[trip_id].type;
 
-	if (result)
-		return result;
+	mutex_unlock(&tz->lock);
 
-	switch (trip.type) {
+	switch (type) {
 	case THERMAL_TRIP_CRITICAL:
 		return sprintf(buf, "critical\n");
 	case THERMAL_TRIP_HOT:

@@ -163,25 +162,23 @@ trip_point_temp_show(struct device *dev,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	struct thermal_trip trip;
-	int trip_id, ret;
+	int trip_id, temp;
 
 	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip_id) != 1)
 		return -EINVAL;
 
 	mutex_lock(&tz->lock);
 
-	if (device_is_registered(dev))
-		ret = __thermal_zone_get_trip(tz, trip_id, &trip);
-	else
-		ret = -ENODEV;
+	if (!device_is_registered(dev)) {
+		mutex_unlock(&tz->lock);
+		return -ENODEV;
+	}
 
-	mutex_unlock(&tz->lock);
+	temp = tz->trips[trip_id].temperature;
 
-	if (ret)
-		return ret;
+	mutex_unlock(&tz->lock);
 
-	return sprintf(buf, "%d\n", trip.temperature);
+	return sprintf(buf, "%d\n", temp);
 }
 
 static ssize_t

@@ -232,22 +229,23 @@ trip_point_hyst_show(struct device *dev,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	struct thermal_trip trip;
-	int trip_id, ret;
+	int trip_id, hyst;
 
 	if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip_id) != 1)
 		return -EINVAL;
 
 	mutex_lock(&tz->lock);
 
-	if (device_is_registered(dev))
-		ret = __thermal_zone_get_trip(tz, trip_id, &trip);
-	else
-		ret = -ENODEV;
+	if (!device_is_registered(dev)) {
+		mutex_unlock(&tz->lock);
+		return -ENODEV;
+	}
+
+	hyst = tz->trips[trip_id].hysteresis;
 
 	mutex_unlock(&tz->lock);
 
-	return ret ? ret : sprintf(buf, "%d\n", trip.hysteresis);
+	return sprintf(buf, "%d\n", hyst);
 }
 
 static ssize_t
Reviewed-by on v4 2/2
#4 lore raw

Re: [PATCH v4 2/2] thermal: sysfs: Rework the reading of trip point attributes

Quoted 12 lines · Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Rework the _show() callback functions for the trip point temperature, hysteresis and type attributes to avoid copying the values of struct thermal_trip fields that they do not use and make them carry out the same validation checks as the corresponding _store() callback functions.

No intentional functional impact.

Signed-off-by Rafael J. Wysocki <[email protected]>

---

Quoted 8 lines

v3 -> v4: Don't check trip_id against boundaries in the _show routines
for trip type, temperature and hysteresis (Daniel).

v2 -> v3: Drop a redundant 'ret' check at the end of trip_point_hyst_show.

v1 -> v2: Do not drop thermal zone locking from the _store() callback functions.

---

Reviewed-by Daniel Lezcano <[email protected]>
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog