Firmware error for Asus MyCinema P7131H (NXP)
Hi,
I've a problem with new version of MyCinema 7131H, one with NXP chip
(saa7131E, tda10046A).
On boot, system fail to load firmware for tda10046, showing a wrong firmware revision number (normally 80, but sometimes other numbers).
If I reboot (not shutdown & power up!), or if I unload all saa7134* modules from memory and reload saa7134-dvb, firmware is loaded correctly with revision 20...
Note: I never had this problem with old Philips-brand Asus P7131H.
thanks in advance,
Francesco Ferrario
IT Manager Chimera project
www.chimeratv.it
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Francesco ha scritto:
Quoted 11 lines
Hi,
I've a problem with new version of MyCinema 7131H, one with NXP chip
(saa7131E, tda10046A).On boot, system fail to load firmware for tda10046, showing a wrong firmware revision number (normally 80, but sometimes other numbers).
If I reboot (not shutdown & power up!), or if I unload all saa7134* modules from memory and reload saa7134-dvb, firmware is loaded correctly with revision 20...
Quoted 8 lines
Note: I never had this problem with old Philips-brand Asus P7131H.
thanks in advance,
Francesco FerrarioIT Manager Chimera project
www.chimeratv.it
After reading "unstable tda1004x firmware loading", I've found a little workaround (not a solution, but...) for this problem...
Simply adding "saa7134-dvb" to /etc/modules, make a successful firmware loading on boot.
(My system is an Ubuntu 7.10)
Francesco Ferrario
- Chimera project -
- www.chimeratv.it -
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb