net: sh_eth: Fix compile error sh_eth
Subsystems (3)
PATCH 1/1 net: sh_eth: Fix compile error sh_eth
Fix compile error on sh_eth and remove base address macro.
Signed-off-by Nobuhiro Iwamatsu <[email protected]>
--- drivers/net/sh_eth.c | 4 ++-- drivers/net/sh_eth.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/net/sh_eth.c +2 -2
@@ -322,7 +322,7 @@ static int sh_eth_dev_init(struct net_device *ndev)ctrl_outl ((FIFO_SIZE_T |FIFO_SIZE_R ), ioaddr +FDR );ctrl_outl (0 , ioaddr +TFTR ); -ctrl_outl (RMCR_RST , ioaddr +RMCR ); +ctrl_outl (0 , ioaddr +RMCR ); rx_int_var = mdp->rx_int_var =DESC_I_RINT8 |DESC_I_RINT5 ; tx_int_var = mdp->tx_int_var =DESC_I_TINT2 ;
@@ -994,7 +994,7 @@ static int sh_mdio_init(struct net_device *ndev, int id)/* Hook up MII support for ethtool */ mdp->mii_bus->name ="sh_mii" ; mdp->mii_bus->dev = &ndev->dev; - mdp->mii_bus->id = id; + mdp->mii_bus->id[0 ] = id;/* PHY IRQ */ mdp->mii_bus->irq =kmalloc (sizeof (int )*PHY_MAX_ADDR ,GFP_KERNEL );
drivers/net/sh_eth.h +2 -2
@@ -40,8 +40,6 @@#define PKT_BUF_SZ 1538/* Chip Base Address */ -#define SH_ETH0_BASE 0xA7000000 -#define SH_ETH1_BASE 0xA7000400#define SH_TSU_ADDR 0xA7000804/* Chip Registers */
@@ -462,3 +460,5 @@ static void swaps(char *src, int len) *p =swab32 (*p); #endif } + +#endif
Signature · 1 line
1.5.5.1
Jeff Garzik
AppliedQuoted 7 lines · Nobuhiro Iwamatsu
Fix compile error on
sh_ethand remove base address macro.Signed-off-by Nobuhiro Iwamatsu <[email protected]>--- drivers/net/sh_eth.c | 4 ++-- drivers/net/sh_eth.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
applied