ECS K7VTA3: Mixer channels reversed
Hi list,
I just replaced a mobo with an ECS K7VTA3 and I find that the Headphones control is now controlling the master channel and the Master control does nothing.
I tried 'modprobe via82xx ac97_quirk=hp_only' but that makes the audio device unusable (although alsamixer still seems happy to set the individual channels). Any other quirks I should try?
Here is some hardware info:
ALSA sound/pci/via82xx.c:2409: via82xx: DXS white list for ESC K8 found
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Elitegroup Computer Systems Unknown device 1841
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at dc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
I'm running Linus' git kernel, current as of today, and alsa 1.0.16.
At Mon, 23 Jun 2008 16:15:05 -0700,
Quoted 10 lines · walt
Hi list,
I just replaced a mobo with an ECS K7VTA3 and I find that the Headphones control is now controlling the master channel and the Master control does nothing.
I tried 'modprobe via82xx ac97_quirk=hp_only' but that makes the audio device unusable (although alsamixer still seems happy to set the individual channels).
You mean that you don't hear any outputs? Which I/O (HP out, line-out, etc) are you testing?
Quoted 1 line
Any other quirks I should try?
Usually hp_only is the right choice. Check alsa-info.sh script outputs for both cases with and without ac97_quirk option.
Takashi
Quoted 23 lines
Here is some hardware info:
ALSA
sound/pci/via82xx.c:2409: via82xx: DXS white list for ESC K8 found00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Elitegroup Computer Systems Unknown device 1841
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at dc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xxI'm running Linus' git kernel, current as of today, and alsa 1.0.16.
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 8 lines · Takashi Iwai
At Mon, 23 Jun 2008 16:15:05 -0700,
Quoted 6 lines · walt
Hi list,
I just replaced a mobo with an ECS K7VTA3 and I find that the Headphones control is now controlling the master channel and the Master control does nothing.
Quoted 6 lines
Quoted 3 lines
I tried 'modprobe via82xx ac97_quirk=hp_only' but that makes the audio device unusable (although alsamixer still seems happy to set the individual channels).
You mean that you don't hear any outputs? Which I/O (HP out, line-out, etc) are you testing?
Sorry, I forgot to mention that RealAudio player complains that it "cannot open the audio device. Another application may be using it."
However, I just tried mplayer, which *does* work normally and the master channel also works properly again.
So it seems that hp_only works, but only partly. Any idea why RealPlayer is complaining?
Quoted 4 lines
Quoted 1 line
Any other quirks I should try?
Usually
hp_onlyis the right choice. Checkalsa-info.shscript outputs for both cases with and withoutac97_quirkoption.
Most of that info means nothing to me, so all I can do is point you the results, sorry:
without hp_only
http://pastebin.ca/1056077
and with hp_only:
http://pastebin.ca/1056088
At Wed, 25 Jun 2008 17:08:02 -0700,
Quoted 17 lines · walt
Quoted 8 lines · Takashi Iwai
At Mon, 23 Jun 2008 16:15:05 -0700,
Quoted 6 lines · walt
Hi list,
I just replaced a mobo with an ECS K7VTA3 and I find that the Headphones control is now controlling the master channel and the Master control does nothing.
Quoted 6 lines
Quoted 3 lines
I tried 'modprobe via82xx ac97_quirk=hp_only' but that makes the audio device unusable (although alsamixer still seems happy to set the individual channels).
You mean that you don't hear any outputs? Which I/O (HP out, line-out, etc) are you testing?
Quoted 8 lines
Sorry, I forgot to mention that RealAudio player complains that it "cannot open the audio device. Another application may be using it."
However, I just tried mplayer, which *does* work normally and the master channel also works properly again.
So it seems that
hp_onlyworks, but only partly. Any idea why RealPlayer is complaining?
Hard to believe that the error of RealPlayer comes from ac97_quirk option. It's likely a coincidence. Please double-check.
Takashi
Re: ECS K7VTA3: Mixer channels reversed [PATCH]
Quoted 19 lines · Takashi Iwai
At Wed, 25 Jun 2008 17:08:02 -0700,
Quoted 17 lines · walt
Quoted 8 lines · Takashi Iwai
At Mon, 23 Jun 2008 16:15:05 -0700,
Quoted 6 lines · walt
Hi list,
I just replaced a mobo with an ECS K7VTA3 and I find that the Headphones control is now controlling the master channel and the Master control does nothing.
Quoted 5 lines
Quoted 3 lines
I tried 'modprobe via82xx ac97_quirk=hp_only' but that makes the audio device unusable (although alsamixer still seems happy to set the individual channels).
You mean that you don't hear any outputs? Which I/O (HP out, line-out, etc) are you testing?
Sorry, I forgot to mention that RealAudio player complains that it "cannot open the audio device. Another application may be using it."
Quoted 8 lines
Quoted 5 lines
However, I just tried mplayer, which *does* work normally and the master channel also works properly again.
So it seems that
hp_onlyworks, but only partly. Any idea why RealPlayer is complaining?Hard to believe that the error of RealPlayer comes from
ac97_quirkoption. It's likely a coincidence. Please double-check.
Okay, this patch seems to make everything work correctly, but lspci still reports "unknown device" in spite of it.
sound/pci/via82xx.c +6 -0
@@ -1746,6 +1746,12 @@ static struct ac97_quirk ac97_quirks[] = { }, { .subvendor = 0x1019, + .subdevice = 0x1841, + .name = "ECS K7VTA3", + .type =AC97_TUNE_HP_ONLY + }, + { + .subvendor = 0x1019, .subdevice = 0x0a81, .name ="ECS K7VTA3" , .type = AC97_TUNE_HP_ONLY
Re: ECS K7VTA3: Mixer channels reversed [PATCH]
At Thu, 26 Jun 2008 05:47:18 -0700,
Quoted 24 lines · walt
Quoted 22 lines · Takashi Iwai
At Wed, 25 Jun 2008 17:08:02 -0700,
Quoted 20 lines · walt
Quoted 8 lines · Takashi Iwai
At Mon, 23 Jun 2008 16:15:05 -0700,
Quoted 6 lines · walt
Hi list,
I just replaced a mobo with an ECS K7VTA3 and I find that the Headphones control is now controlling the master channel and the Master control does nothing.
Quoted 5 lines
Quoted 3 lines
I tried 'modprobe via82xx ac97_quirk=hp_only' but that makes the audio device unusable (although alsamixer still seems happy to set the individual channels).
You mean that you don't hear any outputs? Which I/O (HP out, line-out, etc) are you testing?
Sorry, I forgot to mention that RealAudio player complains that it "cannot open the audio device. Another application may be using it."
However, I just tried mplayer, which *does* work normally and the master channel also works properly again.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
So it seems that
hp_onlyworks, but only partly. Any idea why RealPlayer is complaining?Hard to believe that the error of RealPlayer comes from
ac97_quirkoption. It's likely a coincidence. Please double-check.Okay, this patch seems to make everything work correctly, but lspci still reports "unknown device" in spite of it.
lspci doesn't know anything about the driver, so don't worry about it.
The patch looks good to me. Could you give your sign-off so that it's merged to the upstream? See $LINUX/Documentation/SubmittingPatches for details.
thanks,
Takashi
Quoted 25 lines
sound/pci/via82xx.c +6
-0@@ -1746,6 +1746,12 @@ static struct ac97_quirk ac97_quirks[] = { }, { .subvendor = 0x1019, + .subdevice = 0x1841, + .name = "ECS K7VTA3", + .type =AC97_TUNE_HP_ONLY + }, + { + .subvendor = 0x1019, .subdevice = 0x0a81, .name ="ECS K7VTA3" , .type = AC97_TUNE_HP_ONLY_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel