Skip to contentSkip to conversation

powerpc/powernv: Rework exports to support subnodes

PATCH In review Oliver O'Halloran 2 participants 3 messages Nov 1, 2019 – Jan 29, 2020 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 powerpc/powernv: Rework exports to support subnodes

Originally we only had a handful of exported memory ranges, but we'd to export the per-core trace buffers. This results in a lot of files in the exports directory which is a but unfortunate. We can clean things up a bit by turning subnodes into subdirectories of the exports directory.

---
 arch/powerpc/platforms/powernv/opal.c | 114 +++++++++++++++++++++-------------
 1 file changed, 72 insertions(+), 42 deletions(-)
arch/powerpc/platforms/powernv/opal.c +72 -42
index 38e9027..0373da5 100644
@@ -752,6 +752,75 @@ static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
 				       bin_attr->size);
 }
 
+static int opal_add_one_export(struct kobject *parent, const char *export_name,
+			       struct device_node *np, const char *prop_name)
+{
+	struct bin_attribute *attr = NULL;
+	const char *name = NULL;
+	u64 vals[2];
+	int rc;
+
+	rc = of_property_read_u64_array(np, prop_name, &vals[0], 2);
+	if (rc)
+		goto out;
+
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+	name = kstrdup(export_name, GFP_KERNEL);
+	if (!name) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	sysfs_bin_attr_init(attr);
+	attr->attr.name = name;
+	attr->attr.mode = 0400;
+	attr->read = export_attr_read;
+	attr->private = __va(vals[0]);
+	attr->size = vals[1];
+
+	rc = sysfs_create_bin_file(parent, attr);
+out:
+	if (rc) {
+		kfree(name);
+		kfree(attr);
+	}
+
+	return rc;
+}
+
+static void opal_add_exported_attrs(struct device_node *np,
+				    struct kobject *kobj)
+{
+	struct device_node *child;
+	struct property *prop;
+
+	for_each_property_of_node(np, prop) {
+		int rc;
+
+		if (!strcmp(prop->name, "name") ||
+		    !strcmp(prop->name, "phandle"))
+			continue;
+
+		rc = opal_add_one_export(kobj, prop->name, np, prop->name);
+		if (rc) {
+			pr_warn("Unable to add export %pOF/%s, rc = %d!\n",
+				np, prop->name, rc);
+		}
+	}
+
+	for_each_child_of_node(np, child) {
+		struct kobject *child_kobj;
+
+		child_kobj = kobject_create_and_add(child->name, kobj);
+		if (!child_kobj) {
+			pr_err("Unable to create export dir for %pOF\n", child);
+			continue;
+		}
+
+		opal_add_exported_attrs(child, child_kobj);
+	}
+}
+
 /*
  * opal_export_attrs: creates a sysfs node for each property listed in
  * the device-tree under /ibm,opal/firmware/exports/
@@ -761,12 +830,8 @@ static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
  */
 static void opal_export_attrs(void)
 {
-	struct bin_attribute *attr;
 	struct device_node *np;
-	struct property *prop;
 	struct kobject *kobj;
-	u64 vals[2];
-	int rc;
 
 	np = of_find_node_by_path("/ibm,opal/firmware/exports");
 	if (!np)
@@ -779,41 +844,7 @@ static void opal_export_attrs(void)
 		return;
 	}
 
-	for_each_property_of_node(np, prop) {
-		if (!strcmp(prop->name, "name") || !strcmp(prop->name, "phandle"))
-			continue;
-
-		if (of_property_read_u64_array(np, prop->name, &vals[0], 2))
-			continue;
-
-		attr = kzalloc(sizeof(*attr), GFP_KERNEL);
-
-		if (attr == NULL) {
-			pr_warn("Failed kmalloc for bin_attribute!");
-			continue;
-		}
-
-		sysfs_bin_attr_init(attr);
-		attr->attr.name = kstrdup(prop->name, GFP_KERNEL);
-		attr->attr.mode = 0400;
-		attr->read = export_attr_read;
-		attr->private = __va(vals[0]);
-		attr->size = vals[1];
-
-		if (attr->attr.name == NULL) {
-			pr_warn("Failed kstrdup for bin_attribute attr.name");
-			kfree(attr);
-			continue;
-		}
-
-		rc = sysfs_create_bin_file(kobj, attr);
-		if (rc) {
-			pr_warn("Error %d creating OPAL sysfs exports/%s file\n",
-				 rc, prop->name);
-			kfree(attr->attr.name);
-			kfree(attr);
-		}
-	}
+	opal_add_exported_attrs(np, kobj);
 
 	of_node_put(np);
 }
@@ -974,11 +1005,10 @@ static int __init opal_init(void)
 		opal_sys_param_init();
 		/* Setup message log sysfs interface. */
 		opal_msglog_sysfs_init();
+		/* Add all export properties*/
+		opal_export_attrs();
 	}
 
-	/* Export all properties */
-	opal_export_attrs();
-
 	/* Initialize platform devices: IPMI backend, PRD & flash interface */
 	opal_pdev_init("ibm,opal-ipmi");
 	opal_pdev_init("ibm,opal-flash");
Signature · 1 line
2.9.5
#1 lore raw

PATCH v2 2/2 powerpc/powernv: Use common code for the symbol_map export

Long before we had a generic way for firmware to export memory ranges of interest we added a special case for the skiboot symbol map. The code is pretty much identical to the generic export so re-use the code.

---
v2: Actually compile.

---
 arch/powerpc/platforms/powernv/opal.c | 48 ++++++++---------------------------
 1 file changed, 10 insertions(+), 38 deletions(-)
arch/powerpc/platforms/powernv/opal.c +10 -38
index 0373da5..e4ea27d 100644
@@ -708,42 +708,6 @@ static int opal_sysfs_init(void)
 	return 0;
 }
 
-static ssize_t symbol_map_read(struct file *fp, struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buf, loff_t off, size_t count)
-{
-	return memory_read_from_buffer(buf, count, &off, bin_attr->private,
-				       bin_attr->size);
-}
-
-static struct bin_attribute symbol_map_attr = {
-	.attr = {.name = "symbol_map", .mode = 0400},
-	.read = symbol_map_read
-};
-
-static void opal_export_symmap(void)
-{
-	const __be64 *syms;
-	unsigned int size;
-	struct device_node *fw;
-	int rc;
-
-	fw = of_find_node_by_path("/ibm,opal/firmware");
-	if (!fw)
-		return;
-	syms = of_get_property(fw, "symbol-map", &size);
-	if (!syms || size != 2 * sizeof(__be64))
-		return;
-
-	/* Setup attributes */
-	symbol_map_attr.private = __va(be64_to_cpu(syms[0]));
-	symbol_map_attr.size = be64_to_cpu(syms[1]);
-
-	rc = sysfs_create_bin_file(opal_kobj, &symbol_map_attr);
-	if (rc)
-		pr_warn("Error %d creating OPAL symbols file\n", rc);
-}
-
 static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
 				struct bin_attribute *bin_attr, char *buf,
 				loff_t off, size_t count)
@@ -832,6 +796,7 @@ static void opal_export_attrs(void)
 {
 	struct device_node *np;
 	struct kobject *kobj;
+	int rc;
 
 	np = of_find_node_by_path("/ibm,opal/firmware/exports");
 	if (!np)
@@ -846,6 +811,15 @@ static void opal_export_attrs(void)
 
 	opal_add_exported_attrs(np, kobj);
 
+	/*
+	 * NB: symbol_map existed before the generic export interface so it
+	 * lives under the top level opal_kobj.
+	 */
+	rc = opal_add_one_export(opal_kobj, "symbol_map",
+				 np->parent, "symbol-map");
+	if (rc)
+		pr_warn("Error %d creating OPAL symbols file\n", rc);
+
 	of_node_put(np);
 }
 
@@ -991,8 +965,6 @@ static int __init opal_init(void)
 	/* Create "opal" kobject under /sys/firmware */
 	rc = opal_sysfs_init();
 	if (rc == 0) {
-		/* Export symbol map to userspace */
-		opal_export_symmap();
 		/* Setup dump region interface */
 		opal_dump_region_init();
 		/* Setup error log interface */
Signature · 1 line
2.9.5
#2 lore raw
In reply to Oliver O'Halloran
Quoted 6 lines · Oliver O'Halloran

Originally we only had a handful of exported memory ranges, but we'd to export the per-core trace buffers. This results in a lot of files in the exports directory which is a but unfortunate. We can clean things up a bit by turning subnodes into subdirectories of the exports directory.

Series applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/db93361260e2411f854514e8b54b6c31a5b2d5bd

cheers