Add MVBC_P board
PATCH v3 1/1 Add MVBC_P board
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. Please see doc/README.mvbc_p for details.
---
Grant,
please find attached v3 with further mods :
- change all pointer ops to in_* out_*
- move GPIO bit defines into mpc5xxx.h
- move board to company subdir
Common usage of the fpga.c (Kim's proposal) will be patched separately along with an mvBL-M7 board movement to company subdir.
Please let me know if there's still somehting that needs fixing.
regards,
Andre
MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: patch_mvbc_p
Url: http://lists.denx.de/pipermail/u-boot/attachments/20080709/9489b5e3/attachment.txt
PATCH v3 1/1 Add MVBC_P board
Quoted 1 line · In message <[email protected]> you wrote:
...
Makefile uc101_config: unconfig · line 752
Quoted 13 lines
Makefile +7
-0@@ -743,6 +743,14 @@ uc101_config: unconfig motionpro_config: unconfig @$(MKCONFIG) motionpro ppc mpc5xxx motionpro +MVBC_P_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mvbc_p + @ >$(obj)include/config.h + @[ -z "$(findstring MVBC_P,$@)" ] || \ + { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; \ + }
Please put the '}' on the previous line. This saves a line in an ever growing Makefile ;-)
Quoted 6 lines
board/matrix_vision/mvbc_p/Makefile new file +0
-0@@ -0,0 +1,50 @@
...
board/matrix_vision/mvbc_p/Makefile
Quoted 2 lines
board/matrix_vision/mvbc_p/Makefile new file +2
-0+distclean: clean + rm -f $(LIB) core *.bak .depend
Please change this into "$(obj).depend"
Quoted 6 lines
board/matrix_vision/mvbc_p/config.mk new file +0
-0@@ -0,0 +1,30 @@
...
Quoted 1 line
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
Please change this into
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I am a computer. I am dumber than any human and smarter than any ad- ministrator.