Skip to contentSkip to conversation

e1000: add support for 82545GM 64bit PCI-X copper variant

PATCH New Paul Gortmaker 3 participants 3 messages Jul 9, 2008 Network drivers

lore
Share & tools
lore

Paul Gortmaker

author
#0 lore raw

PATCH 1/1 e1000: add support for 82545GM 64bit PCI-X copper variant

This PCI-X e1000 variant works by just adding in the correct PCI IDs in the appropriate places.

Signed-off-by Paul Gortmaker <[email protected]>
---
 drivers/net/e1000.c |    2 ++
 drivers/net/e1000.h |    3 ++-
 include/pci_ids.h   |    1 +
 3 files changed, 5 insertions(+), 1 deletions(-)
drivers/net/e1000.c +2 -0
index c31029a..060b518 100644
@@ -75,6 +75,7 @@ static struct pci_device_id supported[] = {
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82544GC_LOM},
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82540EM},
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_COPPER},
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545GM_COPPER},
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_COPPER},
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82545EM_FIBER},
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546EB_FIBER},

@@ -636,6 +637,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
 		hw->mac_type = e1000_82540;
 		break;
 	case E1000_DEV_ID_82545EM_COPPER:
+	case E1000_DEV_ID_82545GM_COPPER:
 	case E1000_DEV_ID_82545EM_FIBER:
 		hw->mac_type = e1000_82545;
 		break;
drivers/net/e1000.h +2 -1
index 23b2eb9..c258bc2 100644
@@ -217,13 +217,14 @@ struct e1000_phy_stats {
 #define E1000_DEV_ID_82544GC_LOM    0x100D
 #define E1000_DEV_ID_82540EM	    0x100E
 #define E1000_DEV_ID_82540EM_LOM    0x1015
+#define E1000_DEV_ID_82545GM_COPPER 0x1026
 #define E1000_DEV_ID_82545EM_COPPER 0x100F
 #define E1000_DEV_ID_82545EM_FIBER  0x1011
 #define E1000_DEV_ID_82546EB_COPPER 0x1010
 #define E1000_DEV_ID_82546EB_FIBER  0x1012
 #define E1000_DEV_ID_82541ER	    0x1078
 #define E1000_DEV_ID_82541GI_LF	    0x107C
-#define NUM_DEV_IDS 15
+#define NUM_DEV_IDS 16
 
 #define NODE_ADDRESS_SIZE 6
 #define ETH_LENGTH_OF_ADDRESS 6
include/pci_ids.h +1 -0
index d061017..165456b 100644
@@ -1827,6 +1827,7 @@
 #define PCI_DEVICE_ID_INTEL_82545EM_FIBER	0x1011
 #define PCI_DEVICE_ID_INTEL_82546EB_FIBER	0x1012
 #define PCI_DEVICE_ID_INTEL_82540EM_LOM		0x1015
+#define PCI_DEVICE_ID_INTEL_82545GM_COPPER	0x1026
 #define PCI_DEVICE_ID_INTEL_82559		0x1030
 
 #define PCI_DEVICE_ID_INTEL_82562ET	0x1031
Signature · 1 line
1.5.6.2
Applied
#1 lore raw

PATCH 1/1 e1000: add support for 82545GM 64bit PCI-X copper variant

Quoted 9 lines · In message <[email protected]>…

This PCI-X e1000 variant works by just adding in the correct PCI IDs in the appropriate places.

Signed-off-by Paul Gortmaker <[email protected]>
---
 drivers/net/e1000.c |    2 ++
 drivers/net/e1000.h |    3 ++-
 include/pci_ids.h   |    1 +
 3 files changed, 5 insertions(+), 1 deletions(-)

Applied, thanks.

Ben, this was so straightforward that I applied it directly. Hope this is OK.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Well I don't see why I have to make one man  miserable  when  I  can
make so many men happy."              - Ellyn Mustard, about marriage
#2 lore raw

PATCH 1/1 e1000: add support for 82545GM 64bit PCI-X copper variant

Quoted 13 lines · Wolfgang Denk
Quoted 10 lines · In message <[email protected]>…

This PCI-X e1000 variant works by just adding in the correct PCI IDs in the appropriate places.

Signed-off-by Paul Gortmaker <[email protected]>
---
 drivers/net/e1000.c |    2 ++
 drivers/net/e1000.h |    3 ++-
 include/pci_ids.h   |    1 +
 3 files changed, 5 insertions(+), 1 deletions(-)
Quoted 5 lines

Applied, thanks.

Ben, this was so straightforward that I applied it directly. Hope this is OK.

That's cool. I acked it in my head :) and was going to sanity-check applying it tonight.

regards,
Ben