Fix copper/fiber auto-selection for 88e1111

The 27.15 bit (MII_M1111_HWCFG_FIBER_COPPER_AUTO) is disable bit. When set to 1, copper/fiber auto selection is disabled. The current code to enable but actually disable auto selection.

---
 drivers/net/phy/marvell.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

index 32a8503..737512c 100644
@@ -162,7 +162,7 @@ static int m88e1111_config_init(struct phy_device

*phydev)

/* Enable Fiber/Copper auto selection */ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);

temp = phy_read(phydev, MII_BMCR);

1.5.5.4