Skip to contentSkip to conversation

Linux based router Kernel Panic (2.6.23 - 2.6.26-rc9)

DISCUSSION Daniel Kubiak 3 participants 6 messages Jul 21, 2008 – Jul 22, 2008

lore
Share & tools
lore
#0 lore raw

Hello,

I've got Linux based router (Intel Xeon 3060 + Intel S3200SH ServerBoard with 2x1GbE NIC) which make NAT and QoS for 2000+ computers. Usually past 4-8 days of uptime I've got Kernel Panic. I try 2.6.23-2.6.26-rc9 kernels). Here is photo of Kernel Panic: http://www.sor.osiris.czest.pl/dsc02009.jpg

Signature · 4 lines
z poważaniem
Daniel Kubiak

jid/e-mail: [email protected]
#1 lore raw
Quoted 4 lines · Daniel Kubiak

I've got Linux based router (Intel Xeon 3060 + Intel S3200SH ServerBoard with 2x1GbE NIC) which make NAT and QoS for 2000+ computers. Usually past 4-8 days of uptime I've got Kernel Panic. I try 2.6.23-2.6.26-rc9 kernels). Here is photo of Kernel Panic: http://www.sor.osiris.czest.pl/dsc02009.jpg

Enable CONFIG_KALLSYMS and CONFIG_DEBUG_BUGVERBOSE next time.

Or you can grab vmlinux of that kernel and decipher addresses by hand.

#3 lore raw
Quoted 6 lines · Daniel Kubiak

Alexey Dobriyan pisze:

Quoted 4 lines

Enable CONFIG_KALLSYMS and CONFIG_DEBUG_BUGVERBOSE next time.

Or you can grab vmlinux of that kernel and decipher addresses by hand.

I've got CONFIG_KALLSYMS and CONFIG_DEBUG_BUGVERBOSE set to yes, here is my kernel config http://www.sor.osiris.czest.pl/config-2.6.26-rc9-nat2

Could you provide also System.map?

#5 lore raw
Quoted 5 lines · Daniel Kubiak

Jiri Slaby pisze:

Quoted 3 lines

Could you provide also System.map?

Yes, of course: http://www.sor.osiris.czest.pl/System.map-2.6.26-rc9-nat2

Well, neither the config nor the System.map are not from the kernel you make a snapshot from -- it's a 2.6.25 or earlier kernel and you are referring to 2.6.26-rc9. System.map is useless anyway, I overlooked module addresses in the panic before. Try to reproduce with the config you attached and post snapshot from that kernel.