hda: added 92HD81/83 support
PATCH 1/1 hda: added 92HD81/83 support
Added support for 92HD81/83 family of codecs.
This also includes a pwr_mapping array for pins that have more than one amp to power down.
---
pci/hda/hda_codec.h +1 -0
@@ -121,6 +121,7 @@ enum {#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 0x71d#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 0x71e#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 0x71f +#define AC_VERB_SET_EAPD 0x788#define AC_VERB_SET_CODEC_RESET 0x7ff/*
pci/hda/patch_sigmatel.c +101 -0
149 lines not on this page · raw message
*codec,
}
/* labels for mono mux outputs */
-static const char *stac92xx_mono_labels[3] = {
- "DAC0", "DAC1", "Mixer"
+static const char *stac92xx_mono_labels[4] = {
+ "DAC0", "DAC1", "Mixer", "DAC2"
};
/* create mono mux for mono out on capable codecs */
@@ -2686,16 +2787,19 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec,
}
continue;
found:
- wcaps = get_wcaps(codec, nid);
+ wcaps = get_wcaps(codec, nid) &
+ (AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
- if (wcaps & AC_WCAP_OUT_AMP) {
+ if (wcaps) {
sprintf(name, "%s Capture Volume",
stac92xx_dmic_labels[dimux->num_items]);
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_VOL,
name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0,
+ (wcaps & AC_WCAP_OUT_AMP) ?
+ HDA_OUTPUT : HDA_INPUT));
if (err < 0)
return err;
}
@@ -2819,8 +2923,8 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
hp_speaker_swap = 1;
}
if (spec->autocfg.mono_out_pin) {
- int dir = (get_wcaps(codec, spec->autocfg.mono_out_pin)
- & AC_WCAP_OUT_AMP) ? HDA_OUTPUT : HDA_INPUT;
+ int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
+ (AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
u32 caps = query_amp_caps(codec,
spec->autocfg.mono_out_pin, dir);
hda_nid_t conn_list[1];
@@ -2842,21 +2946,26 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
!(wcaps & AC_WCAP_LR_SWAP))
spec->mono_nid = conn_list[0];
}
- /* all mono outs have a least a mute/unmute switch */
- err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE,
- "Mono Playback Switch",
- HDA_COMPOSE_AMP_VAL(spec->autocfg.mono_out_pin,
- 1, 0, dir));
- if (err < 0)
- return err;
- /* check to see if there is volume support for the amp */
- if ((caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT) {
- err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL,
- "Mono Playback Volume",
- HDA_COMPOSE_AMP_VAL(spec->autocfg.mono_out_pin,
- 1, 0, dir));
+ if (dir) {
+ hda_nid_t nid = spec->autocfg.mono_out_pin;
+
+ /* most mono outs have a least a mute/unmute switch */
+ dir = (dir & AC_WCAP_OUT_AMP) ? HDA_OUTPUT : HDA_INPUT;
+ err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE,
+ "Mono Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0, dir));
if (err < 0)
return err;
+ /* check for volume support for the amp */
+ if ((caps & AC_AMPCAP_NUM_STEPS)
+ >> AC_AMPCAP_NUM_STEPS_SHIFT) {
+ err = stac92xx_add_control(spec,
+ STAC_CTL_WIDGET_VOL,
+ "Mono Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0, dir));
+ if (err < 0)
+ return err;
+ }
}
stac92xx_auto_set_pinctl(codec, spec->autocfg.mono_out_pin,
@@ -2936,7 +3045,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = dig_out;
- if (spec->autocfg.dig_in_pin)
+ if (dig_in && spec->autocfg.dig_in_pin)
spec->dig_in_nid = dig_in;
if (spec->kctl_alloc)
@@ -3332,7 +3441,12 @@ static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
& 0x000000ff;
presence = get_hp_pin_presence(codec, nid);
- idx = 1 << idx;
+
+ /* several codecs have two power down bits */
+ if (spec->pwr_mapping)
+ idx = spec->pwr_mapping[idx];
+ else
+ idx = 1 << idx;
if (presence)
val &= ~idx;
@@ -3668,6 +3782,94 @@ again:
return 0;
}
+static struct hda_input_mux stac92hd83xxx_dmux = {
+ .num_items = 3,
+ .items = {
+ { "Analog Inputs", 0x03 },
+ { "Digital Mic 1", 0x04 },
+ { "Digital Mic 2", 0x05 },
+ }
+};
+
+static int patch_stac92hd83xxx(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec;
+ int err;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+ spec->mono_nid = 0x19;
+ spec->digbeep_nid = 0x21;
+ spec->dmic_nids = stac92hd83xxx_dmic_nids;
+ spec->dmux_nids = stac92hd83xxx_dmux_nids;
+ spec->adc_nids = stac92hd83xxx_adc_nids;
+ spec->pwr_nids = stac92hd83xxx_pwr_nids;
+ spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
+ spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
+ spec->multiout.dac_nids = stac92hd83xxx_dac_nids;
+
+ spec->init = stac92hd83xxx_core_init;
+ switch (codec->vendor_id) {
+ case 0x111d7605:
+ spec->multiout.num_dacs = STAC92HD81_DAC_COUNT;
+ break;
+ default:
+ spec->num_pwrs--;
+ spec->init++; /* switch to config #2 */
+ spec->multiout.num_dacs = STAC92HD83_DAC_COUNT;
+ }
+
+ spec->mixer = stac92hd83xxx_mixer;
+ spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
+ spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
+ spec->num_adcs = ARRAY_SIZE(stac92hd83xxx_adc_nids);
+ spec->num_dmics = STAC92HD83XXX_NUM_DMICS;
+ spec->dinput_mux = &stac92hd83xxx_dmux;
+ spec->pin_nids = stac92hd83xxx_pin_nids;
+ spec->board_config = snd_hda_check_board_config(codec,
+ STAC_92HD83XXX_MODELS,
+ stac92hd83xxx_models,
+ stac92hd83xxx_cfg_tbl);
+again:
+ if (spec->board_config < 0) {
+ snd_printdd(KERN_INFO "hda_codec: Unknown model for"
+ " STAC92HD83XXX, using BIOS defaults\n");
+ err = stac92xx_save_bios_config_regs(codec);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
+ }
+ spec->pin_configs = spec->bios_pin_configs;
+ } else {
+ spec->pin_configs = stac92hd83xxx_brd_tbl[spec->board_config];
+ stac92xx_set_config_regs(codec);
+ }
+
+ err = stac92xx_parse_auto_config(codec, 0x1d, 0);
+ if (!err) {
+ if (spec->board_config < 0) {
+ printk(KERN_WARNING "hda_codec: No auto-config is "
+ "available, default to model=ref\n");
+ spec->board_config = STAC_92HD83XXX_REF;
+ goto again;
+ }
+ err = -EINVAL;
+ }
+
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
+ }
+
+ codec->patch_ops = stac92xx_patch_ops;
+
+ return 0;
+}
+
+
static int patch_stac92hd71bxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
@@ -4386,6 +4588,8 @@ struct hda_codec_preset snd_hda_preset_sigmatel[] = {
{ .id = 0x838476a6, .name = "STAC9254", .patch = patch_stac9205 }, { .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 }, { .id = 0x111d7603, .name = "92HD75B3X5", .patch = patch_stac92hd71bxx},
+ { .id = 0x111d7604, .name = "92HD83C1X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d7605, .name = "92HD81B1X5", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7608, .name = "92HD75B2X5", .patch = patch_stac92hd71bxx}, { .id = 0x111d7674, .name = "92HD73D1X5", .patch = patch_stac92hd73xx }, { .id = 0x111d7675, .name = "92HD73C1X5", .patch = patch_stac92hd73xx },
Takashi Iwai
AppliedAt Tue, 22 Jul 2008 10:36:54 -0400,
Quoted 4 lines · Matthew Ranostay
Added support for 92HD81/83 family of codecs.
This also includes apwr_mappingarray for pins that have more than one amp to power down.
Thanks, applied.
Takashi