Compro DVB-T100
I have Compro Videomate DVB T-100 card.
There are drivers for T200 and other Videomate cards in my current kernel 2.6.25-gentoo-r7. The card is using saa7134 chip with mt352 demodulator and qt1010 tuner.
I was able to modify some code to get T100 support.
Unfortunately I had to change some code common for all cards using qt1010 tuner. This will probably break other cards support.
I attach patch against my kernel source. Use at own risk this is my firs patch. There are some comments on changes on my personal pages http://www.vlamat.wz.cz/index.php?t100
Vladimír Matěna
[email protected]
drivers/media/dvb/frontends/qt1010.c +3 -0
@@ -227,6 +227,9 @@ static int qt1010_set_params(struct dvb_else tmpval =0x05 ; rd[41 ].val = (priv->reg20_init_val +0x0d + tmpval); + rd[41 ].val =0x39 + tmpval;// for Videomate DVB T-100 +// FIXME two different calcualtion models on the lines above +/* 25 */ rd[43 ].val = priv->reg25_init_val;
drivers/media/video/saa7134/saa7134-cards.c +49 -13
90 lines not on this page · raw message
drivers/media/video/saa7134/saa7134-dvb.c +43 -0
73 lines not on this page · raw message
drivers/media/video/saa7134/saa7134.h +1 -0
@@ -254,6 +254,7 @@ struct saa7134_format {#define SAA7134_BOARD_BEHOLD_M6 130#define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 131#define SAA7134_BOARD_GENIUS_TVGO_A11MCE 132 +#define SAA7134_BOARD_VIDEOMATE_DVBT_100 150#define SAA7134_MAXBOARDS 8#define SAA7134_INPUT_MAX 8
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb