Skip to contentSkip to conversation

682Mhz problem with TT-1501 driver in v4l-dvb

linux-dvb Simon Baxter 5 participants 10 messages Jul 22, 2008 – Aug 13, 2008 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi - please help!!!!

I have patched the v4l-dvb driver with Sigmund Augdal's changes to support C-1501. I can't get channels to work on all but one frequency - 682Mhz. Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674 Mhz.

I have some channels at 674Mhz and at 682Mhz. My initial is:
# Initial Testing

# freq sr fec mod
# freq sr fec mod
C 674000000 6900000 AUTO QAM64
C 682000000 6900000 AUTO QAM64

Scanning gives me:
./scan -A 2 test_initial
initial transponder 674000000 6900000 9 3
initial transponder 682000000 6900000 9 3

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

0x0000 0x0321: pmt_pid 0x0029 T -- Sky Movies (running, scrambled) 0x0000 0x0322: pmt_pid 0x002a T -- Sky Movies Greats (running, scrambled) 0x0000 0x0323: pmt_pid 0x002b T -- Trackside (running, scrambled)

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0030
WARNING: filter timeout pid 0x002d
WARNING: filter timeout pid 0x0029
WARNING: filter timeout pid 0x002f
WARNING: filter timeout pid 0x002a

-------------->> What does this pid timeout mean??

I end up with channels:

Living Channel:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1309:1409:809 UKTV:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1310:1410:810 The Cheese:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:1420:820 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 [0386]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:902 [0387]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:903 [0388]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:904 [0389]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:905

-------------->> Has picked up the pids, but missing information??

When I try and czap them, I get:

[root@freddy scan]# czap -c ~/.channels.conf.tmp TV3
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
2 TV3:578000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:1003 2 TV3: f 578000000, s 6900000, i 2, fec 9, qam 3, v 0x517, a 0x57b

status 00 | signal 9090 | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal e1e1 | snr f2f2 | ber 000005e8 | unc 000001ec | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f3f3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

but with 682Mhz, I get a lock but loads of errors:

[root@freddy scan]# czap -c ~/.channels.conf.tmp [0385] using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
1 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 1 [0385]: f 682000000, s 6900000, i 2, fec 9, qam 3, v 0, a 0

status 03 | signal 8f8f | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061a7 | FE_HAS_LOCK
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061e8 | FE_HAS_LOCK
status 1f | signal cfcf | snr dede | ber 000006c0 | unc 00006234 | FE_HAS_LOCK
status 1f | signal cfcf | snr e0e0 | ber 000006a9 | unc 0000627f | FE_HAS_LOCK
status 1f | signal cfcf | snr dbdb | ber 000006a5 | unc 000062b6 | FE_HAS_LOCK

Any ideas???

linux/drivers/media/dvb/ttpci/budget-ci.c +28 -0
diff -r 6541620a09b7 linux/drivers/media/dvb/ttpci/budget-ci.c
@@ -46,6 +46,8 @@
 #include "lnbp21.h"
 #include "bsbe1.h"
 #include "bsru6.h"
+#include "tda1002x.h"
+#include "tda827x.h"
 
 /*
  * Regarding DEBIADDR_IR:
@@ -1069,6 +1071,16 @@
 
 
 
+static struct tda10023_config tda10023_config = {
+	.demod_address = 0xc,
+	.invert = 0,
+	.xtal = 16000000,
+	.pll_m = 11,
+	.pll_p = 3,
+	.pll_n = 1,
+	.deltaf = 0xA511,
+};
+
 static void frontend_init(struct budget_ci *budget_ci)
 {
 	switch (budget_ci->budget.dev->pci->subsystem_device) {
@@ -1137,6 +1149,20 @@
 			}
 		}
 
+		break;
+	case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */
+		budget_ci->budget.dvb_frontend =
+			dvb_attach(tda10023_attach, &tda10023_config,
+				   &budget_ci->budget.i2c_adap, 0x48);
+		if (budget_ci->budget.dvb_frontend) {
+			if (dvb_attach(tda827x_attach,
+				       budget_ci->budget.dvb_frontend, 0x61,
+				       &budget_ci->budget.i2c_adap, NULL)
+			    == NULL)
+				printk(KERN_ERR "%s: No tda827x found!\n",
+				       __func__);
+			break;
+		}
 		break;
 	}
 
@@ -1226,6 +1252,7 @@
 MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T	 PCI", BUDGET_TT);
 MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
 MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
 
 static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
@@ -1234,6 +1261,7 @@
 	MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
 	MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
 	MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
+	MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101A),
 	{
 	 .vendor = 0,
 	 }

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw

Not sure if it's related, but have noticed 618Mhz (which works / has channels on my TT-1500-C and TT-2300-C) gives:
[root@freddy scan]# ./scan -A 2 test
scanning test
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 618000000 6900000 9 3

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 618000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

WARNING: >>> tuning failed!!!

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

tune to: 618000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64 (tuning failed)

WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

same for 650Mhz and 658Mhz.

But 690Mhz gives:
[root@freddy scan]# ./scan -A 2 test
scanning test
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 690000000 6900000 9 3

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 690000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.

------------------> which is what I'd expect, as I have no channels at 690.

Is there something as simple as a maths problem somewhere???

Quoted 93 lines

Hi - please help!!!!

I have patched the v4l-dvb driver with Sigmund Augdal's changes to support C-1501. I can't get channels to work on all but one frequency - 682Mhz. Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674 Mhz.

I have some channels at 674Mhz and at 682Mhz. My initial is:
# Initial Testing

# freq sr fec mod
# freq sr fec mod
C 674000000 6900000 AUTO QAM64
C 682000000 6900000 AUTO QAM64

Scanning gives me:
./scan -A 2 test_initial
initial transponder 674000000 6900000 9 3
initial transponder 682000000 6900000 9 3

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

0x0000 0x0321: pmt_pid 0x0029 T -- Sky Movies (running, scrambled) 0x0000 0x0322: pmt_pid 0x002a T -- Sky Movies Greats (running, scrambled) 0x0000 0x0323: pmt_pid 0x002b T -- Trackside (running, scrambled)

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0030
WARNING: filter timeout pid 0x002d
WARNING: filter timeout pid 0x0029
WARNING: filter timeout pid 0x002f
WARNING: filter timeout pid 0x002a

-------------->> What does this pid timeout mean??

I end up with channels:

Living Channel:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1309:1409:809 UKTV:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1310:1410:810 The Cheese:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:1420:820 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 [0386]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:902 [0387]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:903 [0388]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:904 [0389]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:905

-------------->> Has picked up the pids, but missing information??

When I try and czap them, I get:

[root@freddy scan]# czap -c ~/.channels.conf.tmp TV3
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
2 TV3:578000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:1003 2 TV3: f 578000000, s 6900000, i 2, fec 9, qam 3, v 0x517, a 0x57b

status 00 | signal 9090 | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal e1e1 | snr f2f2 | ber 000005e8 | unc 000001ec |

FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f3f3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

but with 682Mhz, I get a lock but loads of errors:

[root@freddy scan]# czap -c ~/.channels.conf.tmp [0385] using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
1 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 1 [0385]: f 682000000, s 6900000, i 2, fec 9, qam 3, v 0, a 0

status 03 | signal 8f8f | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061a7 |

FE_HAS_LOCK
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061e8 | FE_HAS_LOCK
status 1f | signal cfcf | snr dede | ber 000006c0 | unc 00006234 | FE_HAS_LOCK
status 1f | signal cfcf | snr e0e0 | ber 000006a9 | unc 0000627f | FE_HAS_LOCK
status 1f | signal cfcf | snr dbdb | ber 000006a5 | unc 000062b6 | FE_HAS_LOCK

Quoted 2 lines

Any ideas???

--------------------------------------------------------------------------------

Quoted 4 lines

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#2 lore raw

Re: [linux-dvb] ANYONE?? 682Mhz problem with TT-1501 driver in v4l-dvb

In reply to Simon Baxter

Can anyone help??

Quoted 93 lines

Hi - please help!!!!

I have patched the v4l-dvb driver with Sigmund Augdal's changes to support C-1501. I can't get channels to work on all but one frequency - 682Mhz. Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674 Mhz.

I have some channels at 674Mhz and at 682Mhz. My initial is:
# Initial Testing

# freq sr fec mod
# freq sr fec mod
C 674000000 6900000 AUTO QAM64
C 682000000 6900000 AUTO QAM64

Scanning gives me:
./scan -A 2 test_initial
initial transponder 674000000 6900000 9 3
initial transponder 682000000 6900000 9 3

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

0x0000 0x0321: pmt_pid 0x0029 T -- Sky Movies (running, scrambled) 0x0000 0x0322: pmt_pid 0x002a T -- Sky Movies Greats (running, scrambled) 0x0000 0x0323: pmt_pid 0x002b T -- Trackside (running, scrambled)

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0030
WARNING: filter timeout pid 0x002d
WARNING: filter timeout pid 0x0029
WARNING: filter timeout pid 0x002f
WARNING: filter timeout pid 0x002a

-------------->> What does this pid timeout mean??

I end up with channels:

Living Channel:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1309:1409:809 UKTV:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1310:1410:810 The Cheese:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:1420:820 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 [0386]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:902 [0387]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:903 [0388]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:904 [0389]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:905

-------------->> Has picked up the pids, but missing information??

When I try and czap them, I get:

[root@freddy scan]# czap -c ~/.channels.conf.tmp TV3
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
2 TV3:578000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:1003 2 TV3: f 578000000, s 6900000, i 2, fec 9, qam 3, v 0x517, a 0x57b

status 00 | signal 9090 | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal e1e1 | snr f2f2 | ber 000005e8 | unc 000001ec |

FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f3f3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

but with 682Mhz, I get a lock but loads of errors:

[root@freddy scan]# czap -c ~/.channels.conf.tmp [0385] using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
1 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 1 [0385]: f 682000000, s 6900000, i 2, fec 9, qam 3, v 0, a 0

status 03 | signal 8f8f | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061a7 |

FE_HAS_LOCK
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061e8 | FE_HAS_LOCK
status 1f | signal cfcf | snr dede | ber 000006c0 | unc 00006234 | FE_HAS_LOCK
status 1f | signal cfcf | snr e0e0 | ber 000006a9 | unc 0000627f | FE_HAS_LOCK
status 1f | signal cfcf | snr dbdb | ber 000006a5 | unc 000062b6 | FE_HAS_LOCK

Quoted 2 lines

Any ideas???

--------------------------------------------------------------------------------

Quoted 4 lines

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#3 lore raw

Re: [linux-dvb] Please - anyone at all?? 682Mhz problem with TT-1501 driver inv4l-dvb

Hi
I'm getting no responses from any help lists - can anyone offer any advice or comment please???

Thanks!!

Simon

Quoted 110 lines

Can anyone help??

Quoted 94 lines

Hi - please help!!!!

I have patched the v4l-dvb driver with Sigmund Augdal's changes to support
C-1501. I can't get channels to work on all but one frequency - 682Mhz. Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674 Mhz.

I have some channels at 674Mhz and at 682Mhz. My initial is:
# Initial Testing

# freq sr fec mod
# freq sr fec mod
C 674000000 6900000 AUTO QAM64
C 682000000 6900000 AUTO QAM64

Scanning gives me:
./scan -A 2 test_initial
initial transponder 674000000 6900000 9 3
initial transponder 682000000 6900000 9 3

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

0x0000 0x0321: pmt_pid 0x0029 T -- Sky Movies (running, scrambled) 0x0000 0x0322: pmt_pid 0x002a T -- Sky Movies Greats (running, scrambled) 0x0000 0x0323: pmt_pid 0x002b T -- Trackside (running, scrambled)

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64

WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0030
WARNING: filter timeout pid 0x002d
WARNING: filter timeout pid 0x0029
WARNING: filter timeout pid 0x002f
WARNING: filter timeout pid 0x002a

-------------->> What does this pid timeout mean??

I end up with channels:

Living Channel:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1309:1409:809 UKTV:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1310:1410:810 The Cheese:674000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:1420:820 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 [0386]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:902 [0387]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:903 [0388]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:904 [0389]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:905

-------------->> Has picked up the pids, but missing information??

When I try and czap them, I get:

[root@freddy scan]# czap -c ~/.channels.conf.tmp TV3
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
2 TV3:578000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:1303:1403:1003 2 TV3: f 578000000, s 6900000, i 2, fec 9, qam 3, v 0x517, a 0x57b

status 00 | signal 9090 | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal e1e1 | snr f2f2 | ber 000005e8 | unc 000001ec |

FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f3f3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal e1e1 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

but with 682Mhz, I get a lock but loads of errors:

[root@freddy scan]# czap -c ~/.channels.conf.tmp [0385] using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.channels.conf.tmp'
1 [0385]:682000000:INVERSION_AUTO:6900000:FEC_AUTO:QAM_64:0:0:901 1 [0385]: f 682000000, s 6900000, i 2, fec 9, qam 3, v 0, a 0

status 03 | signal 8f8f | snr b9b9 | ber 000fffff | unc 00000032 |
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061a7 |

FE_HAS_LOCK
status 1f | signal cfcf | snr dcdc | ber 000005e8 | unc 000061e8 | FE_HAS_LOCK
status 1f | signal cfcf | snr dede | ber 000006c0 | unc 00006234 | FE_HAS_LOCK
status 1f | signal cfcf | snr e0e0 | ber 000006a9 | unc 0000627f | FE_HAS_LOCK
status 1f | signal cfcf | snr dbdb | ber 000006a5 | unc 000062b6 | FE_HAS_LOCK

Quoted 2 lines

Any ideas???

--------------------------------------------------------------------------------

Quoted 4 lines

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Quoted 5 lines

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#4 lore raw

Re: [linux-dvb] Please - anyone at all?? 682Mhz problem with TT-1501 driver inv4l-dvb

Quoted 3 lines · Simon Baxter

Hi
I'm getting no responses from any help lists - can anyone offer any advice or comment please???

Could you try to change demodulator parameters slightly to see if it helps. There is deltaf ts_output_mode and some other values that could effect. Look anysee.c file for example.

regards
Antti

Signature · 6 lines
http://palosaari.fi/

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
#5 lore raw

Re: [linux-dvb] Please - anyone at all?? 682Mhz problem with TT-1501 driver inv4l-dvb

In reply to Simon Baxter
Quoted 10 lines · Simon Baxter

Hi
I'm getting no responses from any help lists - can anyone offer any advice or comment please???

Quoted 5 lines
Quoted 5 lines

I have patched the v4l-dvb driver with Sigmund Augdal's changes to support
C-1501. I can't get channels to work on all but one frequency - 682Mhz. Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674 Mhz.

You are not alone with this problem.
I haven't signal on two more frequencies: 322 and 386 MHz

AK

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#6 lore raw

Re: [linux-dvb] Please - anyone at all?? 682Mhz problem with TT-1501 driver inv4l-dvb

Quoted 14 lines
Quoted 13 lines

Hi
I'm getting no responses from any help lists - can anyone offer any advice
or comment please???

Quoted 7 lines
Quoted 7 lines

I have patched the v4l-dvb driver with Sigmund Augdal's changes to support
C-1501. I can't get channels to work on all but one frequency - 682Mhz.
Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674
Mhz.

Quoted 4 lines

You are not alone with this problem.
I haven't signal on two more frequencies: 322 and 386 MHz

AK

Is this a hardware problem? Has anyone tried it on a Windows machine??

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#7 lore raw

Re: [linux-dvb] THINGS ARE LOOKING UP!!682Mhz problem withTT-1501 driver inv4l-dvb

Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

I have patched the v4l-dvb driver with Sigmund Augdal's changes to support
C-1501. I can't get channels to work on all but one frequency - 682Mhz.
Frequencies which work: 578, 586, 594, 602, 610, 626, 634, 642, 666, 674
Mhz.

Quoted 6 lines
Quoted 4 lines

You are not alone with this problem.
I haven't signal on two more frequencies: 322 and 386 MHz

AK

Is this a hardware problem? Has anyone tried it on a Windows machine??

I was mucking around with some patches to dvb_ca_en50221.c and saa7146_i2c.c which introduce some 'msleep(1)' delays when communicating with the CAM, and in the process firmed up some of the cable connections, and I'm now getting a picture on some 682Mhz channels. Looks like it might have been mostly an electrical problem.

I am getting some new weird problems with occasional no audio when I tune to a channel, but this might yet be signal, VDR or vdr-xine. Will keep you posted!

Thanks

Simon

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#8 lore raw

Re: [linux-dvb] THINGS ARE LOOKING UP!!682Mhz problem withTT-1501 driver inv4l-dvb

Hi all,
I am using a Pinnacle 2001e DVB-T USB dongle. I have brought up the dongle. It is scanning .
But. i am facing a serious problem.
The captured stream can not be played out. And also while recording from the channel the application is stopping for sometime and again starting. Can anyone point out what is going wrong?
I am in some serious problem.

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#9 lore raw

Re: [linux-dvb] THINGS ARE LOOKING UP!!682Mhz problem withTT-1501 driver inv4l-dvb

In reply to Simon Baxter
Quoted 11 lines · On Sun, 3 Aug 2008 21:27:13 +1200 "Simon Baxter" <[email protected]> wrote:

I was mucking around with some patches to dvb_ca_en50221.c and saa7146_i2c.c which introduce some 'msleep(1)' delays when communicating with the CAM, and in the process firmed up some of the cable connections, and I'm now getting a picture on some 682Mhz channels. Looks like it might have been mostly an electrical problem.

I am getting some new weird problems with occasional no audio when I tune to a channel, but this might yet be signal, VDR or vdr-xine. Will keep you posted!

Hi,

have you made an progress yet ?

Martin

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb